Question about 1990 Nissan Minivan

1 Answer

Nissan Largo 1995

Hi. I got a nissan largo model 1995. My problem with my vehicle is that even though that i have change the cylinder head of nissan largo cd20 diesel engine. The problem of engine overheating keeps on recurring after 2-3 weeks after it was repair. I have even change my cylinder heads gaskets thrice already. same trouble comes-up. What was cause of repeated problem of my engine.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 17 Answers

Do the thermostat and water pump, just did my cd20 and there was nothing left of the water pump

Posted on Aug 12, 2010

  • guzzz_comp Aug 29, 2010

    sir we have same problem with my 1995 cd20 Nissan sentra sedan cylinder head, did you replace with genuine cylinder head gasket? im hesitate to replace again for i spent huge money for this problem, thanks

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi there my nissan largo 2 litre diesel has just had new timing belt and head gasket now brake light staying on and oil light any ideas I have replaced switch


These are different areas. I diagnose cars. Other mechanics usually work on them. Unless it is electrical or computers. Seen many times the person who worked on them pinch electrical lines. When it comes back and I see it. The other guy has to redo it. I fix the wires. There are coincidences, But if those happened right out of the shop, I would question it.

Nov 13, 2016 | Nissan Cars & Trucks

1 Answer

Wheres the dipstick on a nissan largo 2.0td 1995 and how do i get to it


Stand at the front of the vehicle and look on the right side of the engine, near the front. Next to the alternator - on the engine block- you'll see the dipstick tube.

The dipstick itself will probably have a yellow handle/grip

Apr 29, 2016 | Nissan Cars & Trucks

1 Answer

Best place to get spare parts for 1996 largo


Depends if you want new or used parts. Many new parts will be hard to come by for that 20 yo model.
Used parts will be available from some vehicle dismantlers dealing in scrapped Nissan vehicles.

If it is only a new starter motor you need then it is most likely a starter motor model fitted to numerous different Nissan vehicles. If you can get the details of the starter off the unit in your car, contact a shop that deals in starter motors and see if it is still possible to buy a new or rebuilt one of the same specification. . Alternatively you may be able to have your current starter re-built if there are suppliers in your area that do this work.

Nov 24, 2015 | Cars & Trucks

1 Answer

Torque pressure on Nissan CD20 cylinder head.


This is what I found for you Frank >

Do it in a cross sequence, first torque to 25 lbs. all the bolts. Then torque them again to 55 or 60, and that would be it. Not sure but we use to drive for a week to a fortnight then torque up again when the engine is cold. Good luck with it Cheers Greg.

Mar 21, 2015 | Nissan Cars & Trucks

1 Answer

I have a nissan diesel 4 cylinder td27 engine , what i the normal oil pressure gauge reading for this engine whilst running


2.9 to 3.9 bar at 3000 rpm is fairly general for the Nissan range including turbo diesel, though the pressure isn't listed for the td27 engine. I doubt it would be more or less than the others.
I notice one Nissan commercial vehicle engine where 3.0 bar at 2000 rpm is specified.

The oil pressure test should be carried out at normal operating temperature.

Feb 26, 2015 | Nissan Cars & Trucks

1 Answer

Nissan largo


Did you have it scanned for codes? If codes come up follow the diagnostic sequence. Cam or crank sensor may cause this, but I would get it scanned!

May 31, 2014 | 1996 Nissan Pathfinder

1 Answer

How to change spark plugs on nissan largo


Sorry, your question does not contain enough information for anyone to help you with your problem. For anyone to provide the information for you, they will first need to know the YEAR, MAKE, MODEL, and ENGINE SIZE of the vehicle that you want the information for.

Jun 02, 2012 | Nissan Cars & Trucks

1 Answer

Are the front strut for nissan largo and the 1994


Parts yard usually have cross reference books or have a dealer or parts house compare part numbers for you.

Apr 29, 2010 | 1995 Nissan Sentra

Not finding what you are looking for?
Cars & Trucks Logo

1,436 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...