Question about 2002 Jaguar X-Type

1 Answer

My engine and abs lights are on. I replaced the rear ABS sensor, then replaced both front speed sensors!!! Now have codes C-1145 and C-1175 and P-1000!!

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 142 Answers

C1145 is a Right Front wheel speed sensor fault
C1175 is a Left rear wheel speed sensor fault.
P1000 System OBD check not complete since last memorie clear which mostlikely means that the car has not completed the drive cycle to set all monitors for the engine emissions. ( it may just need to be driven a more.
As for the wheel speed sensors if you have replaced them the ABS codes need to be cleared. the engine code reader and clearing tool will not do it. A scanner with ABS capabilities is needed. On some cars if you disconnect the battery and wait 3 mins then re connect the battery, that will clear all codes. then the car needs to be driven to set all monitors for engine emissions.
If you have already cleared the codes. and you have repete same codes for the ABS, you would need to look the wireing over for possible wire rubs that are causing the faults. or the ABS computer itself is at fault.

Posted on Apr 01, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What are the probable causes of DTCs C0222, C0226, and C0237?


Brent, Check and clean connections(use electronic contact cleaner), make sure wires are not damaged. Check grounds from EBCM controller. Check links below and don't be afraid to google search for more info.
C 0222 Missing Right Front Speed Signal
C 0226 Missing Left Front Speed Signal
- Faulty Right/Left Front Speed Sensor
- Right/ Left Front Speed Sensor harness is open or shorted
- Right/ Left Front Speed Sensor circuit poor electrical connection
- Faulty EBCM

C 0237 Erratic rear speed signal
- Faulty Rear Speed Sensor
- Rear Speed Sensor harness is open or shorted
- Rear Speed Sensor circuit poor electrical connection
- Faulty EBCM


How fixed Chevy with an Abs and Brake light on

https://www.google.ca/url?sa=t&rct=j&q=&esrc=s&source=web&cd=3&cad=rja&uact=8&ved=0ahUKEwi0i8zz5YzLAhWD74MKHffwDLQQtwIIITAC&url=https%3A%2F%2Fwww.youtube.com%2Fwatch%3Fv%3DR_5WZUebDx8&usg=AFQjCNHimqe_Fje8AySjD5N0Wh8z8dQuuw

How To Install Replace Front ABS Sensor and Harness 2000 06 Chevy Suburban...

Feb 23, 2016 | 2003 Chevrolet Tahoe

3 Answers

What is the code C1247 pontiac grand am 2001?


left front wheel sensor is not reading replace wheel speed sensor

Jul 13, 2014 | 2001 Pontiac Grand Am SE

1 Answer

Speed Sensor (ABS Sensor) on my 02 Camaro (Passenger side rear) is shaved down. ABS thumps while driving and making right turns.


Most likely you have a defective ABS sensor which is part off the front bearing assembly. you will need have or if you have a code reader capable of reading abs codes find the wheel that is causing the code. Then source the part and if you have the ability to replace it replace it. The code/ light should go out when the abs signal is getting correct information.

Nov 09, 2013 | Chevrolet Camaro Cars & Trucks

1 Answer

Abs on vr commodore light stays on solutions


Error logs are a great thing. They will help you find intermittent problems and start you off in a general direction of where a problem could be. There is a great level of detail on the justcommodores site on checking error codes logged by the engine management system, but this does not detail anything about the abs system. The abs warning light is not as common as the check engine warning light. Reading through the posts, I haven't found any detail on checking error codes logged by the abs system.

So here it is. For those of you familiar with checking the engine error codes, this procedure is so simple its not funny.

Basically, to check the engine error log, you bridge the 5th (ground) and 6th pins in the ODB connector under the steering wheel.

To check the ABS error log, using the same trusty calibrated paper clip, you simply bridge pins 5 and 12 of the connector.

To find pins 5 and 12, start at the top left hand corner. That is pin one. Going to the right, you count pin 2,3,4 etc. Once you get to the end, jump back to the start of the bottom left level of pins and keep counting. Pin 5 is about halfway along the top row, pin 12 is a little left of the middle in the bottom row.

Reading the error codes is the same procedure (counting the flashes), except now, the ABS light flashes (as opposed to the engine light when checking the engine codes).

The ABS log also uses code 12 firstly, with any errors logged shown after that. If no errors are logged, the 12 will flash again.

Error codes for the ABS error log (VR/VS) are as follows:

12 Diagnostic system operational
21 Right hand front wheel speed sensor fault
23 Right hand front wheel speed sensor continuity fault
25 Left hand front wheel speed sensor fault
27 Left hand front wheel speed sensor continuity fault
28 Wheel speed sensor frequency error
31 Right hand rear wheel speed sensor fault
33 Right hand rear wheel speed sensor continuity fault
35 Left hand rear wheel speed sensor fault
37 Left hand rear wheel speed sensor continuity fault
41 Right hand front inlet solenoid valve circuit fault
42 Right hand front outlet solenoid valve circuit fault
45 Left hand front inlet solenoid valve circuit fault
46 Left hand front outlet solenoid valve circuit fault
55 Rear inlet solenoid valve circuit fault
56 Rear outlet solenoid valve circuit fault
61 Pump motor relay circuit fault
63 Valve relay circuit fault
71 ABS control module internal fault

The above guide has been verified on a VR/VS. Checking the error log on all models prior to VR/VS is the same for the engine log, and I would assume that the same can be said for the ABS log, would be happy if someone could verify this for me.

Sep 21, 2013 | 2005 Mazda Tribute

1 Answer

After replacing my rear abs speed sensor, my abs light is still on.. i'm on rear discs


Any code that store into the computer need to be manually erase
by a scaner after the problem is fixed.


Mai

Mar 21, 2013 | 2003 Ford Focus

2 Answers

1996 E350 RV, ABS caution/inop light comes on randomly, sooner when ambient air temp warm, above 50F. Have replaced ABS sensor in rear diff along with fluid in diff. Removed and reconnected wire...


Most vehicles with ABS will have speed sensors located on the rear differential, which you found, and one in each hub assembly up front. I have seen some GM vehicles have speed sensors on the rear hub assembly as well. Check the front hub assembly sensors, there should be a two wire harness that is clipped on to your shock mount up by the firewall. If you have an ohm meter you can measure the resistance of the sensor. If open or short obviously it is bad. I don't know the normal resistance of these sensors. Hope I could help, good luck!

Jun 21, 2011 | 1996 Ford Econoline

1 Answer

Getting code P0520 engine speed sensor. How do you replace this. ABS light, brake light. check engine light on. Speedometer does not work


the engine speed sensor is located just above the oil pan at the rear of the engine. it is held in by one screw. For your abs issue see www.saabservices.com and look for abs light link. They can help you with those problems.

Mar 30, 2011 | 1999 Saab 9-5

1 Answer

Need Help. My 2005 Dodge Ram has the abs and brake light on, and the speedo is not working. I have changed the speed control sensor on the rear diff and the transmisson 2 times, though maybe I got a bad...


The ABS and BRAKE warning lights are on in the cluster because there is an active fault in the ABS module. The speed sensors that you have replaced are not direct inputs to the instrument cluster. Your truck should have one or possibly two front wheel speed sensors and one speed sensor in the rear diff. These are all direct inputs to the ABS module which are then calculated and sent out on the "bus" communication wire which is read by the cluster. It would be much easier to diagnose this problem by knowing what the active codes are in the ABS module.

Jan 23, 2011 | Dodge Ram Cars & Trucks

2 Answers

Abs light and brake light are on. also service


You can test the wheel speed sensors by unhooking the connectors and put ohmeter test leads on the sensor terminals should read around 1100-1600 ohms also the connectors themselves were bad for wires breaking inside the insulation at the connectors from flexing when the wheel is turned back and forth..Note excessive wheel bearing noise from bad bearings have also been known for interferring with clean abs signal also causing abs codes good luck

Nov 06, 2009 | 2004 Pontiac Grand Am

4 Answers

Abs light and brake light came on wont turn back off


There is a sensor at the top of the rear differential for the ABS system. That sensor went bad and replacing it took care of the problem. What caused mine to go bad was apperantly water got into the differential when launching and loading my boat. check to see if gear lube needs to be replaced also.
The answer above is perfectly correct. When the ABS sensor on the diff goes bad the speedo no longer will work, the odometer stops recording mileage and both brake and ABS light comes on. You also loose O/D or "Lock-up" in the torque converter. The sensor is inexpensive and can be changed in about 30 mins. Good Luck!
I second the second answer :) My ABS light was on, my BRAKE light was on, my CHECK ENGINE light was on, my SPEEDOMETER wouldn't work below 35 mph, then quit working alltogether. Once the speedomenter quit working the odometer and cruise control quit working. I replaced the rear differential mounted speed sensor ($33) and then reset the CHECK ENGINE light by disconnecting the positive battery cable for a couple of minutes. EVERYTHING then worked.
Replace rear differential speed sensor as follows:
a) remove parking brake cable bracket (1/2" socket)
b) remove speed sensor bolt (9/16" deep socket)
c) remove metal speed sensor cover
d) remove speed sensor from rear differential housing (use channel lock pliers, twist gently back and forth while applying upward pressure. Once the speed sensor has a small gap between it and the rear differential housing, insert a flat-blade screwdriver and gently apply upward pressure while gently twisting speed sensor back and forth.
e) disconnect speed sensor from speed sensor cable
f) lubricate new sensor with WD-40, insert into rear differential housing. It will NOT go in all the way by hand, so do NOT force it nor hit it with anything made out of metal.
g) replace metal speed sensor cover
h) Insert speed sensor bolt and tighten LIGHTLY until a small amout of pressure is felt. Tap speed sensor with rubber hammer until it pops into housing. Finish tightening of speed sensor bolt.
i) replace brake cable bracket, replace 1/2" nut and tighten
j) disconnect positive battery cable for 2 minutes, reconnect positive battery cable
h) start vehicle, enjoy,

Oct 21, 2009 | 1998 Dodge Ram 1500 4WD

Not finding what you are looking for?
2002 Jaguar X-Type Logo

1,378 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

SPEEDY CAR WORK SHOP...

Level 2 Expert

489 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...