Question about 1999 Isuzu Rodeo

1 Answer

How do you change out a broken front wheel stud on a 1999 Isuzu Rodeo

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 501 Answers

If it is broken at a point where you can still grab hold of the stud partially try using a pair of vice grips and maybe even the boxed end of a longer wrench around one of the handles of the vice grip for added leverage. if it's broke off flush with the rotor you'll need a strong enough drill with a carbide tip and an easy out aka an extraction kit to back it out of the threads. A little bit of heat from a torch or some penetrating oil might help loosen it up as well. Just remember one or the other not both or you may need a fire extinguisher. good luck

Posted on Apr 01, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1999 Isuzu Rodeo interchangeable parts with what years


Depends on what parts you're referring to. The 1998 and 1999 are identical I believe, but in 2000 the headlights and front grille changed slightly. Some other "appearance" parts, interior and exterior are different, but many are the same. The engine, drivetrain, wheels and other mechanical parts remained largely the same through 2002. In the final year they were sold in the U.S., 2003 a lot more changes were made but the body remained pretty much the same. They also added the larger, 2.4L engine from the Trooper as an option. In all years from 1998 forward, there were 4cyl, 6cyl, 2WD and 4WD options, automatic and manual transmissions. So, your question is very vague to answer specifically.

Mar 09, 2015 | 1999 Isuzu Rodeo

1 Answer

Is a isuzu rodeo a front wheel drive vehichle?


The '95 Rodeo was not available in front-wheel drive, only RWD and optional 4WD:

http://www.edmunds.com/isuzu/rodeo/1995/features-specs.html

Jun 22, 2012 | Isuzu Rodeo Cars & Trucks

1 Answer

I need a digram showing me how to change the shocks on my 1999 isuzu rodeo


It is quite easy really, Remove the wheel on the corner you want to change, The back ones have one bolt at the top and one at the bottom, Simply unbolt the old one and fit the new one, The front ones are pretty much the same but they may have 2 bolts at one or both ends, Simply unbolt and fit the new ones, just make sure the replacements are bolted in tightly.

Mar 06, 2012 | 1998 Isuzu Rodeo

1 Answer

My 1999 Isuzu Rodeo 4x4 four wheel disk rear wheels will not come off even without the lug nuts, why?


Because the wheels are corroded to the hub, causing it to seize. Leave one nut threaded on just a few turns (so your wheel doesn't go flying), get a big hammer and hit the inside of the tire with a good solid shot. That wheel will break loose pretty quick. Good luck!

Nov 06, 2011 | 1999 Isuzu Rodeo

2 Answers

I have a 1997 isuzu rodeo. 2wd. the front left wheel hub has sheered off 3 of the lugs. do I need to replace the entire wheel hub or can the lugs be replaced? If so how.


Depends if the studs are pressed in or an as built unit. Have a look at what the stud looks like and if it appears to have little grooves in the back side, you can hammer out the other 2 and then replace. I would also look into why the studs are having that much force that they are being sheered off.

Mar 14, 2011 | 1996 Isuzu Rodeo

1 Answer

Cant figure out how to change the front right headlight bulb on a 1999 isuzu rodeo


hard to believe ,,,,,, if you break the glass you can reach the globe real easy

Feb 03, 2010 | 1999 Isuzu Rodeo

1 Answer

Fixing the spuds on wheel disc since someone cut the spuds to get the lug nuts off the wheel to remove the wheel. Cant find the solution in the handbook that i purchased for the isuzu rodeo repairs.


You have to drive the studs in towards the inside of the hub. Depending on how it's made you may have to pull the bearings and the hub off to fix it. Then you have to drive the new ones back in.

Dec 19, 2009 | 1997 Isuzu Rodeo

1 Answer

Steering is tight when making turns. Have to turn the wheel back


it will be power steering rack ,, you will need to get it changed ,

Apr 08, 2009 | 1999 Isuzu Rodeo

1 Answer

1999 isuzu rodeo


have you checked the selanoid what go to the vacuum pump on the front axle

Feb 04, 2009 | 1998 Isuzu Rodeo

1 Answer

1999 Isuzu Rodeo LS, 4 wheel drive


it is probably a brake adjustment problem

Oct 18, 2008 | 1999 Isuzu Rodeo

Not finding what you are looking for?
1999 Isuzu Rodeo Logo

Related Topics:

246 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14380 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...