Question about 1999 Infiniti.5 QX4
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: the gas pedal sticks and
I dont know if you've found any solutions, my car did the same thing. I was told that it is a build up of gunk that forms over time. The dealer cleaned out this area when I got it tuned up. Sorry I can't tell you where this gunk is but after the tune up it was not a problem.
Posted on Apr 10, 2009
your fuel injections lines in intake and injectors and fuel pressure regulator. could be leaking.look under hood.on intake where fuel pressure regulator. is look for gas odor and gas leak.if you get a strong gas scent you need to fix it quick.you got a fire hazard.
Posted on Jun 05, 2009
Bring the vehicle into the dealer if you have a sticky gas pedal. This is a TOYOTA PROBLEM.
It easy ! You need a philips and flat screw driver,and a needle nose pliar.
Use flat screw driver and pry out the two or three dust covers for the arm rest screws then use philips and remove the screws. Next use the flat screw driver and pry out the black plastic mirror cover from the inside of the door. Pry out the switch with the flat screw driver and disconnect it. On the side of the door panel just above the striker/loch mechanism is this plastic push pull type of a hold in screw. Use flat screw driver to get it to move a little then pull it out with the needle nose. Depending on which door your doing if you have a map folder in the door there are two more screw to remove on the bottom of the door.
Now the inside door handle is tricky it comes out in TWO pieces. Use philips and get the only hold down screw you see out.( you may have to pry out a little screw cover first) Now the inside door handle cover is removed by placeing the flat screw driver on the rear of the outside of the cover top and on the outside rear bottom to release the tangs that are holding it onto the panel.Pry it out lightly you may have to place the screw driver over the top of the door release button and pry that way. Don't loose your cool its a pain but it will fall out. Once its removed unhook the panel.
Next lift the plastic cover and remove the door handle hooks and levers . Basically use common sense this is easy stuff. There may be two screws from inside of door panel that keep handle in place . Then work handle loose from outside and inside . reverse for installation.
Posted on Apr 22, 2010
Tips for a great answer:
Apr 18, 2013 | 2003 Volkswagen Passat
Feb 26, 2013 | 2002 Toyota Sienna
May 29, 2012 | 2001 Oldsmobile Aurora
Mar 07, 2011 | Nissan Se R Cars & Trucks
Dec 03, 2010 | 1990 Mercedes-Benz 190
Jul 10, 2010 | 2001 Chevrolet Suburban
Jun 14, 2008 | 1999 Buick LeSabre
52 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: