Question about Chevrolet Cavalier
This could be your reason. Some vehicle come equiped with a double filiment bulb. It could be that this part of your tail light bulb is blown. Try removing one of the bulbs to see if the filiment is broken. If you can not see this, replace the bulb.
The other senario is that the fuse in your fuse panel controling your tail lights (running light) is blown. This is usually on a seperate fuse than your brake lights. Your owner's manual should state which fuse is what on your panel and replace is with the exact same ratted fuse that it calls for.
Good luck! Hope I helped.
Posted on Mar 31, 2011
Trailblazers have bad sockets that hold the bulbs. The pins the lamps plug into can be bent out to make better contact. Make sure the lights are off before you stick somthing in there. Some may be a recall but not sure. Just something else to check if new bulb or fuse doesn't fix it.
Posted on Apr 08, 2011
Newer Vehicles now a days have combination S/T lights (stop/tail). These bulbs have two filaments in them and sometimes only one goes out. Try replacing the bulbs. If that doesnt work it could be the power supply to the tail filament. I hope this helps you.
Posted on Mar 31, 2011
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Check fuses, I believe that the WJ's (99-04) ran a separate circuit for bake lights. Not sure if they did same for the ZJ's (93-98)
Posted on Oct 02, 2009
The rear tail light switch in the circuit. Remove the switch from its connect and bypass the the terminals on the connector with jumper wires and see what happens. If when you by pass the switch the tail and brake lights work you found the culprit.
Posted on Apr 26, 2010
SOURCE: passenger tail light
remove the bulb from the scoket.you will see 2 or 3 little ground wire arond the socket ,take a piece of sand paper and sand them a little then bend them out just a frog hair and put it back together,,,,,,,,,,,,works on mine
Posted on Apr 05, 2011
Tips for a great answer:
Mar 31, 2012 | 1994 Pontiac Firebird
Nov 19, 2011 | Cars & Trucks
Sep 23, 2011 | 1989 Pontiac Firebird
Jul 06, 2011 | 1993 Toyota Camry V6
Apr 26, 2010 | Hyundai Motor 1999 Elantra
May 10, 2009 | 2003 Chevrolet Suburban 1500
Mar 31, 2009 | 2006 Dodge Stratus
Nov 01, 2008 | 1994 Ford Thunderbird
331 people viewed this question
Usually answered in minutes!