Question about Dodge Ram 1500
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
you can try changing the ignition coil, I own a 97 Dodge 1500 and mine did the same and thats what i had to do.
Posted on Oct 08, 2008
Hi my name is Allen!
The sensor you are looking for is located in the rear diff housing, its mounts on top of the housing it is also used for ABS if equipped.
For further asistance you may reach me through FixYa!
Posted on Dec 27, 2008
SOURCE: iat sensor
Hi there ... The IAT sensor is on the intake manifold, just behind the alternator. For further info on this sensor you can go to www.autozone.com. click on repair info,select your vehicle. then click on vehicle repair guides. In the product search box at the top left type in IAT and then click on the repair guide in the box that appears and it will give you more info.
Hope this helps you out
Posted on Jan 23, 2009
If your looking for the Intake Air Temp/Manifold Absolute Pressure sensor (IAT/MAP)(2003 model year and up) It is on the top of the intake manifold, just to the left of the #3 injector fuel line. There are 2 small Torx screws holding it.
Posted on May 27, 2009
SOURCE: location of oxygen sensor
I believe you may have three (3) O2 sensor, (2) of the sensor is on ether side of the exhaust down pipe and some times called up stream O2 sensor, the third O2 sensor know to some as the down stream O2 and is after the Catalytic converter.
The up stream O2 monitors the left and right side banks and sends signals to the ECM to make the adjustments to the injectors to keep the proper air/fuel ratio.
The down stream O2 monitors the catalytic converter and sends signal to the ECM if the catalytic converter has gone bad.
Good luck and hope this helps. If you get it scanned at Auto Zone, they should be able to let you know which O2 has gone bad so as to not change all three. You could always check the wire harness to the down stream O2 for corrosion. Keep me posted
Posted on May 29, 2009
Tips for a great answer:
Mar 04, 2012 | 1998 Dodge Ram 1500 4WD
Sep 01, 2011 | 2000 Dodge Ram 1500 Truck
Jan 27, 2011 | 2004 Dodge Ram 1500
Jan 03, 2011 | Dodge Ram 1500 Cars & Trucks
Jan 01, 2011 | 2006 Dodge Ram 1500
Apr 21, 2010 | 2000 Dodge Ram 1500 Truck
Jan 23, 2010 | 2008 Dodge Ram 1500 2WD
Sep 15, 2009 | 1999 Dodge Ram
Jun 11, 2009 | 1998 Dodge Ram 1500 4WD
Jan 23, 2009 | 2004 Dodge Ram 1500
105 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: