Question about Dodge Ram 1500

Open Question

How do I fix a transmission fluid pressure sensor switch B circuit on a Dodge 1500 2002

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
leetamara
  • 702 Answers

SOURCE: My 2002 Dodge intrepid has it engine light on

The MAP sensor and Knock Sensor are both very easily replaced. A better scanner will tell you which sensor is going bad on your transmission. An Autozone code reader will not tell you which sensor on the trans. is acting up. Most sensors on your trans. are very easity replaced as well. They just screw in and plug it. It's worth paying to get a "real" scan done. The trans. sensors are inexpensive and you can replace any other your listed sensors yourself.

Posted on Jul 11, 2008

Ad
  • 15 Answers

SOURCE: transmission fluid capacity

Manual 6 quarts
Automatic depends on why it's being added. If bone dry try 8 quarts and check. Always check warm in no gear, if you can't be carefullllll not to over fill. Atf +4 is what dodge automatic. take

Posted on Dec 30, 2008

  • 1 Answer

SOURCE: transmission fluid in antifreeze resevoir?

the same thing happened to my 02' neon and i had to get a new radiator.

Posted on Feb 24, 2009

keeperoffire
  • 106 Answers

SOURCE: 2002 Dodge Caravan, Tranny would shift, DTC P0700, P0725

replace the input speed sensor to transmission and the wiring pigtail all are available at your chrysler dealer take your vehicle registration in to the parts counter so they have your vin # to get the right part and it is the front of trans by fluid linres to radiator.

Posted on Mar 08, 2009

wracefans24
  • 1985 Answers

SOURCE: code p1784 is pressure switch circuit:LR How to

you'll need to have a transmission shop check the wiring harness in the transmission first ,then they can repair it,this is not a job to be doing yourself,

Posted on Jan 26, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Code for 2004 d I dodge Durango, code is po700 and p0988


P0700=transmission control system malfunction
P0988=transmission fluid pressure sensor/switch e circuit range/performance

You have a bad sensor or r low on fluid

Oct 15, 2015 | Dodge Cars & Trucks

1 Answer

2006 dodge durango slt. Engine light is on with 3 codes po700, po876, po732. Any recommendations? How pricey might this be to fix?


P0700 just means the transmission has a problem
P0876....Transmission Fluid Pressure Sensor/Switch "D" Circuit Range/Performance
P0734-GEAR RATIO ERROR IN 4TH


I would take it to a garage that works on dodge's

Feb 18, 2015 | Dodge Cars & Trucks

2 Answers

What does code P1728 mean & how can you fix it on a 2001 Dodge Durango?


It is a transmisson problem. Have you changed the oil filter in it recently? The problem seems to be pressure related. Something like a seal or something deeper like the computer not responding fast enough. Hopefully its simple as a seal on o ring around the fliter or somewhere else. Good luck

Feb 01, 2015 | Dodge Cars & Trucks

1 Answer

P0876, p0700, p0731, p0841


p0841 transmission fluid pressure sensor/switch "A" circuit range/ performance. p0876 transmission fluid pressure sensor/switch "D"circuit range performance. p0700 transmission control system malfunction. p0731 gear 1 incorrect ratio.

Aug 28, 2014 | Cars & Trucks

2 Answers

Codes P1782, P0755, and P0700


P1782 DODGE - 2/4-OD Pressure Switch Circuitxicon.jpghttp://engine-codes.com/p1782_dodge.htmlForum CodePossible causes- Low transmission fluid level
- Dirty transmission fluid
- Faulty 2/4-OD Pressure Switch
- 2/4-OD Pressure switch poor electrical connection
- 2/4-OD Pressure switch circuit is open or shorted
Symptoms- Engine Light ON (or Service Engine Soon Warning Light)
- Transmission shift shockP1782 DODGE Description The pressure 2/4-OD Pressure Switch is part of the pressure switch of the transmission. The pressure switch are located in the solenoid assembly. The switch provide input information to the Transmission Control Module (TCM). The switch will inform to the TCM is pressure exist in a specified hydraulic circuit. the TCM uses this information to verified that the solenoids are working or not.
P0755 DODGE - 2/4 Solenoid Circuitxicon.jpghttp://engine-codes.com/p0755_dodge.htmlForum CodePossible causes- Low transmission fluid level
- Dirty transmission fluid
- Faulty 2/4 solenoid valve
- 2/4 solenoid valve harness is open or shorted
- 2/4 solenoid valve circuit poor electrical connection
P0700 DODGE - Transaxle Control System Malfunctionxicon.jpghttp://engine-codes.com/p0700_dodge.htmlForum CodePossible causes- Shorted or open circuit within transmission control module (TCM)
- Failure of transaxle control module Tech notes Since the P0700 is just and informative code, check the TCM for more codes to resolve the problem.
Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- Driveability problems
- Transaxle shifting problems

Jul 26, 2012 | Plymouth Breeze Cars & Trucks

2 Answers

P0845 Transmission Fluid Pressure Sensor/ Switch B Circuit


Hi Adam, Thanks for your response. To check the bad sensor or a bad transmission pump how much it may cost me to fix the issue?

Jun 20, 2012 | 2005 Chrysler 300

1 Answer

Diagnostic code P1782


P1782 DODGE - 2/4-OD Pressure Switch Circuit Possible causes of this code are: - Low transmission fluid level (check level hot transmission only)
- Dirty transmission fluid (has transmission been serivced at least every 60,000 miles, fluid and new filter?)
- Faulty 2/4-OD Pressure Switch
- 2/4-OD Pressure switch poor electrical connection
- 2/4-OD Pressure switch circuit is open or shorted
P1782 DODGE Description The pressure 2/4-OD Pressure Switch is part of the pressure switch of the transmission. The pressure switch are located in the solenoid assembly. The switch provide input information to the Transmission Control Module (TCM). The switch will inform to the TCM is pressure exist in a specified hydraulic circuit. the TCM uses this information to verified that the solenoids are working or not.

Oct 20, 2011 | 1999 Dodge Caravan

1 Answer

Transmission code p1763 for a 98 Dodge Durango


CODE P1763 - GOVERNOR PRESSURE SENSOR SIGNAL HIGH.POSSIBLE CAUSES SIGNAL WIRE SHORT CIRCUIT TO POSITIVE,VOLTAGE SUPPLY WIREOPEN CIRCUIT,TRANSMISSION FLUID LEVEL LOW,GOVERNOR PRESSURE SENSOR FAILED OR PCM AND TCM HAS FAILED.

Jul 04, 2011 | 1998 Dodge Durango

1 Answer

I have no gears forward or reverse. My Vehicle is a 2003 Dodge Ram 1500 4x4 Hemi with 170,000 on the clock. Fluid is clean and full with no leaks. I have the following trouble codes:...


Your scanner will give you the code but it will not tell you how to fix your vehicle. Scanners basically tell you what systems to check or what systems are failing.

These are what your codes mean:

P0700: Transmission Control Module
- Shorted or open circuit within transmission control module (TCM)
- Failure of transaxle control module. This is just a informative code.

P0734: Gear ratio error in 4th gear
- Low transmission fluid level
- Dirty transmission fluid
- Shift solenoids
- Transmission mechanical problems
- Transmission hydraulic control circuit

P0732: Gear ratio error in 2nd gear
- Low transmission fluid level
- Dirty transmission fluid
- Shift solenoids
- Transmission mechanical problems
- Transmission hydraulic control circuit

P0731: Gear ratio error in 1st gear
- Low transmission fluid level
- Dirty transmission fluid
- Shift solenoids
- Transmission mechanical problems
- Transmission hydraulic control circuit

P0871: Transmission Fluid Pressure Sensor Switch C

P0876: Transmission Fluid Pressure Sensor Switch D

Emissions Codes:

P0400: Exhaust Gas Recirculation Flow Malfunction
- Harness or connectors (EGR volume control valve circuit is open or shorted.)
- EGR volume control valve stuck closed
- EGR volume control solenoid valve
- Dead (Weak) battery
- EGR temperature sensor and circuit
- EGR Valve

How to fix :
- Clean EGR Valve
- Repair EGR harness or connector
- Replaced EGR volume control solenoid valve
- Replaced EGR volume control valve

P0440: EVAP Emission Control System Malfunction
- Missing Fuel cap
- Incorrect fuel filler cap used
- Fuel filler cap remains open or fails to close
- Foreign matter caught in fuel filler cap
- Incorrect fuel tank vacuum relief valve

How to fix:
- Retight or replaced fuel tank filler cap
- Replaced damage or leaking EVAP canister

P0456: EVAP Control System Leak Detected (Very Small Leak)
- Missing Fuel cap
- Incorrect fuel filler cap used
- Fuel filler cap remains open or fails to close
- Foreign matter caught in fuel filler cap
- Incorrect fuel tank vacuum relief valve

How to fix:
- Retight or replaced fuel tank filler cap
- Replaced damage or leaking EVAP canister

P0441: EVAP Emission Control System Incorrect Purge
- Missing Fuel cap
- Incorrect fuel filler cap used
- Fuel filler cap remains open or fails to close
- Foreign matter caught in fuel filler cap
- Incorrect fuel tank vacuum relief valve

How to fix:
- Retight or replaced fuel tank filler cap
- Replaced damage or leaking EVAP canister

Based on the info check your EVAP system. I would check for leaks and maybe replace the EGR and the canister.

For the transmission check the TCM also you may need to take it to a mechanic though.

Hope this helps a little.

- Tech 101 (ASE CERTIFIED MASTER TECHNICIAN)
- Larson's Mobile Auto Repair
- 209-845-7620
- Oakdale, CA

Dec 31, 2010 | Dodge Pickup Cars & Trucks

2 Answers

Code p1784 is pressure switch circuit:LR How to


you'll need to have a transmission shop check the wiring harness in the transmission first ,then they can repair it,this is not a job to be doing yourself,

Jan 26, 2010 | 2000 Dodge Dakota Quad Cab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...