Question about 1986 Toyota Camry

1 Answer

1986 toyota camry side door window came off its track and it's not power windows

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Contributor
  • 299 Answers

It came off track for reason, something broke or rusted out, u will need to remove door panel and inspect areas where glass sits in bottom frame and where glass is attached to wind up arms

Posted on Mar 31, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Drivers side power window 2007 camry


There are a number of causes for this, first the most likely is a fuse, second, the next is the switch has failed, third, if the window moves slightly in each direction, you can rule those out. Camrys have a problem with the windows coming out of the track.

Sep 04, 2016 | 2007 Toyota Camry

1 Answer

My 2002 Toyota camry drivers side window is off track when it's rolled up. Water leaks in and when your driving there is wind noise


You may have to review notes on how to remove the drivers side panel and replace one of the broken screws that hold the glass in place on the bottom rail. I believe the cause my be that and if not it may be a sticky guide rail. Try rubbing some furniture polish on the edge of the glass that sticks (usually to opposite side of the one that does not match the door). This may help to get the glass sliding smoothly again.

Mar 19, 2013 | 2002 Toyota Camry

1 Answer

I have a 2000 Toyota Camry. The back, driver side window slides down on its own. Had someone to brace it in the up position so it wouldn't slide down. How can this be repaired? Thanks.


glass has gotten out of the window regulator track or a broken window regulator. have to remove door panel and now need to know if its power windows or hand rollup windows. if manual you will need to remove handle by removing c-clip from behind the handle.

Jan 15, 2011 | Toyota Camry Cars & Trucks

1 Answer

I own a 2000 Toyota Camry, 4 cyl. Driver side power window rolls down fine but when rolling up comes off track. The front part of the window is lower than the back. All other windows work o.k. I installed...


I just did one on my Chrysler. May be quite different, but I'm suspicious that the track was creased or the fur damaged in some way when you had the original problem, or the track is not secured tightly to the door frame. The regulator keeps the glass pretty even but if the window binds on a crease, or whatever, I guess it could get jammed and slide out the crease instead of up the slot. Good luck. Those accursed things are frustrating work in hard-to-get-in spots!

Dec 19, 2010 | 2002 Toyota Camry

1 Answer

Loose window track in a 2002 Toyota Camry


Look for a missing bolt around frame

Jul 22, 2009 | 2002 Toyota Camry

2 Answers

Divers window won't roll up my Camry


No won't be fuse. My guess is there is something faulty with the main controller. You could probably verify this by trying the switch on right rear passenger door. If it works there then the problem is at the main controller in the driver door. Could be a loose wire or the switch itself is broken.

May 13, 2009 | 1986 Toyota Camry

1 Answer

Driver window off track need to take door panel off how?


On vehicles without power windows, place a soft cloth under the window regulator handle and pull upwards on the cloth to release the snapring. Remove the regulator handle and plate.

Fig. 2: Using a taped prytool, carefully remove the bezel portion of the handle

46f6882.jpg Fig. 3: Remove the bezel by pulling towards the tip of the handle

9b11f67.jpg Fig. 4: Remove any screw covers . . .

Mar 31, 2009 | 1993 Toyota Camry V6

1 Answer

1994 Camry wagon, passenger side electric window.(front seat)


Can you hear the moter or do interior lights dim when pressing button? If so remove door panel and lubricate tracks and rolers using lithium grease lube only the tracks that do not come in contact with glass.

Check the connections at the switch and at the moter with a volt meter if there is power than time for a new moter. no power than check at drivers side switch. If no power there and fuse is ok you have a open in wires and will have to trace entire circut

Jan 20, 2009 | 1994 Toyota Camry

1 Answer

Power window motor driver door


I would not consider that issue normal. Camry window motors are quiet.

Oct 05, 2008 | 2006 Toyota Camry

1 Answer

Power windows


you have to remove the door panel to reglue the window back onto the raise/lower arm.
you likely blew a fuse.

Jun 18, 2008 | 2002 Toyota Camry

Not finding what you are looking for?
1986 Toyota Camry Logo

Related Topics:

334 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...