Question about Dodge Conquest

1 Answer

Some times the engine light will come on and the idle will jump up to 2-3 grand then will do this will driving causing jerking and when coming to a stop the car will stall...other days the car runs good and the light stays off....this tends to do it when the engine is hot or on hotter days...i am thinking it can be the mass air flow sensor...i have been out of work for over 2 years and not receiving any money and we are living off my wifes social security and can not afford to put the car on a diagonistic machine...any idas you may have would be greatly appreciated...Thank you very much we have a 2001 chrysler concorde 2.7 v-6

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 61 Answers

Do you have an "Autozone" auto parts store in your area? They will scan it for free and when you have the codes it will give you a start.

Posted on Mar 31, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

06 monta carlo LS traction control light comes on but there is no ABS light on.I also noticed that when iam cruising down the highway the car's tac is jumping a little and the car is jerking


Engine misfire ! If you have a diagnostic scan tool hooked up ,a professional grade . Can see misfire counter , which would show which cylinder is misfiring . A misfire would cause your jumping and jerking problem . And this would cause traction control light to come on disabling the traction control .

Dec 25, 2016 | Chevrolet Monte Carlo Cars & Trucks

4 Answers

I was driving my 2000 Durango and it made a loud pop then started jerking when I step on or off the gas


Was this an isolated incident or a recurring problem? A universal joint comes to mind or maybe a motor mount.

Dec 12, 2014 | 2000 Dodge Durango

1 Answer

2001 Grand Prix jerks when driving mostly at higher speeds like 70-80 mph. It can do it at 40 mph too and it seems to be when I accellerate. Also, turns off the Cruise Control if its on when it jerks. ...


make a mixture 1 liter two table spoon of salt in bottle with spray
engine idle spray your mixture not too much and see if you have spark on wire ,coil you won't see it if too much mixture
and about spark plugs you could change it too
you have a misfire

Oct 08, 2013 | 2000 Pontiac Grand Prix

2 Answers

Car jerks sometimes when going from P to R


It's the transmission sensor. I've had mine replaced three times now. You can fix it (see this thread: http://www.suzuki-forums.com/suzuki-forenza-reno-forum/35284-transmission-range-sensor-all-you-need.html) and please report it to Suzuki at 1-800-934-0934

Jan 22, 2013 | 2007 Suzuki Forenza Sedan

1 Answer

Jerking/jumping while driving


An automobile's ignition system may work fine while idling but fail during acceleration. Problem areas to be inspected include the spark plugs, spark plug wires and vacuum hoses. Car owners should look for spark plugs that are covered in oil or sediment or damaged, spark plug wires that have damaged insulation, and vacuum hoses that are unplugged or leaking. Fuel Problems
  • The use of a fuel additive that contains both fuel injector cleaner and water remover can fix minor problems due to water in the gas and fuel injector clogs. A fuel pressure gauge can also be used to test the injection system to assure proper pressure.
While most acceleration problems are likely caused by problems with the plugs, wires or fuel, a variety of sensors and other components can cause similar problems. a bad tps ( throttle position sensor ) will cause causes transmission shift issues, bucking, jerking, idle surging, engine cutoff, hesitation on takeoff, and surging while going down highway.
good-day ! check and or clean maf sensor if need be. you can by the maf sensor cleaner at most auto parts stores.

Mar 19, 2012 | Jeep Cars & Trucks

1 Answer

Mazda 323 1,6l,2002model.started jerking while driving and engine died.when cranking spark jump only once on coil for 1&4cyl,second coil no spark at all.bridged apropr.term in diagnostic socket but led...


i have mazda 323 2002 1.3 b3 engine manual transmission in cold engine will starting idling but did not raising 5 to 10 minits and in runnig it will be jerks

Mar 20, 2010 | 2000 Honda Accord

1 Answer

Burning smell,check engine light-misfire, rough idle 96 cavalier


Sounds like there is a blown piston, to be sure have a compression test done on that #2 cylinder, if the reading is low, then you'll know.
A friend of mine had a 95 that did simular things only a little more,
it started smoking, dash lights flickered, etc. Finally, he had to get rid of it, the piston rod went through the engine block.

Feb 02, 2010 | 1996 Chevrolet Cavalier

1 Answer

Wont stop jerking


Check all lines fittings intake parting line at engine etc for vacuum leaks that can cause your problem. You can spray carb cleaner on suspect components and see if idle changes (not sensors) Listen carefully for any hissing noise while running.

Jun 05, 2009 | 1998 Jeep Grand Cherokee

1 Answer

I have an o2 civic and it stutters when shifting


change the idle air control valve its going bad or just take it apart and clean it with carb cleaner.

Mar 03, 2009 | 1993 Honda Civic 4 Door

1 Answer

2002 Honda Accord - slow engine start and jerking


Most likely a dirty idle speed control system follow the guidelines below to clean it.

Throttle Body Cleaning on vehicles without electronic throttle control (most 2003 and down)

You can in most cases repair this slow speed stall or unstable idle by cleaning the engine throttle valve and the idle speed control valve using a product called CRC Spray Throttle valve cleaner. Spray the cleaner into the air intake of the engine with the hose removed from the throttle body, the engine will try to stall so hold up the idle speed manually. Once you have used up about 1/2 can of the cleaner stall the engine out while spraying and turn the key off, disconnect the negative battery cable for 5 minutes and then reconnect and drive the car for a about 25 miles of varied driving modes. If this doesn't cure the problem you may need the fuel injectors professionally cleaned by the dealer service dept.

Jul 11, 2017 | 2002 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8201 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...