Question about 2006 Toyota Tacoma

Open Question

Replace blower fan 2006 toyota tacoma - 2006 Toyota Tacoma

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
MrScary66613
  • 1990 Answers

SOURCE: procedure to change serpentine belt 2006 toyota tacoma?

Here is your Solution!
You will need to Locate the Belt Tensioner. It has a Large Pulley on a Bracket that Has a Bolt in the Middle and a Smaller Pulley that Goes Under the Belt and Holds Tension on it. You will need to get a Wratchet, Socket, and Cheater Bar. Turn the Bolt On the Top Large Pulley with the Wratchet and Cheater Bar. This will Lower the Smaller Pulley So that you will be Able to Remove the Belt. Please Rate My Response! Thanks! P.S. the link below is for the Belt Routing Diagram.
http://www.mvreader.com/multiview/dayco/catalogSearch.php?autoCatalogSearch=1&make=TOYOTA&model=TACOMA&year=2006&year_from=&year_to=&engine=All&l=n

Posted on Feb 06, 2009

Ad
emissionwiz
  • 77544 Answers

SOURCE: 2006 Toyota Tacoma heat/AC fan runs on high only

replace the blower motor speed control resistor.

Posted on Jul 21, 2009

  • 37 Answers

SOURCE: replacing front struts on a 2007 toyota tacoma

REALLY HARD PROJECT, TAKE IT TO SEARS, IT WILL ALSO NEED FRONT ALLIGNMENT

Posted on Jul 25, 2010

silicongeek
  • 53 Answers

SOURCE: Light has gone out on the console display for

The failure of the compass / ambient temperature display is a common issue with 2005 to 2009 Tacomas, and is unrelated to a fuse or other truck systems. However, we permanently fix the problem using all new components and a lead wire underlayment as a heatsink. See our site for more info: http://www.toyotatacomacompassrepair.com
Thanks and good luck...silicongeek

Posted on Dec 19, 2010

  • 1 Answer

SOURCE: overheating toyota tacoma

i have a overheating problem,i changed the thermostatand driving from sea level up to 4000 feet it over heats ,what is wrong

Posted on Jul 10, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

97 Toyota Tacoma fan blower dont work before that


It sounds like the blower motor resistor is bad. Replace it.

Sep 26, 2014 | 1997 Toyota Tacoma

1 Answer

2006 Toyota Tacoma AC Blower works intermittently


there is a TSB for a noisy blower motor and not working except on Hi, both cover under 36K miles, repair includes replacing blower motor and or resistor block and harness, judging your problem can be a bad resistor block and harness. hope it helps

Jul 30, 2012 | 2006 Toyota Tacoma

1 Answer

2006 tacoma heat/air blower fuse location


Hello! Coil of Heater Relay is supplied through Fuse "IG1 2" (10A)...Located in the Drivers Side Box...Contacts of Relay are supplied through "Heater Fuse (50A)...Located in Engine Relay Box...Blower Motor has a 2 wire connector with wire colors: Black/Yellow (Pin 2)...And White/Blue (Pin 1)...Pin 1=Ground and Pin 2=Battery when Relay pulls and contacts close...
The Blower Resistor Pack (Which fails often) controls the fan speed...BUT, there is a fuse inside the assembly...If it blows = No Fan...Located on the top of the heater/AC box and can be accessed through the Glove Compartment...Guru...Saailer

Jun 01, 2012 | 2006 Toyota Tacoma

1 Answer

Heater/defrost/ac does not blow in my 2006 tacoma. worked this morning, parked at work, came out half hour later and would not work.


what has most likely happened is that a fuse has blown that is in your blower fan circuit. Check your owners manual, and see if there is a fuse to that system, if there is, check and see if it is blown. If it isn't, then the problem could either be your blower fan itself, or your blower motor resistor. Generally, when the blower fan goes bad, no speeds of the fan work. When the Blower motor resistor goes bad, usually only 1 speed of the fan works. Try the first suggestion i gave, and it everything checks out in the fuse box, then try all of your fan speeds. If one works, you need a blower motor resistor, if none work, then it is most likely your fan. Let me know how it goes and i'll do my best to assist you further. good luck.

Jan 13, 2011 | 2006 Toyota Tacoma

1 Answer

2006 Tacoma fan blower only works in high.


the blower resistor is bad. find the blower motor and follow the wires to the resistor, its bolted to the air box.

Nov 24, 2010 | 2006 Toyota Tacoma

1 Answer

My AC/Heater does not blow any air in my 2006 Toyota Tacoma V-6 Pre-Runner. There hasnt been any whinning noise from a belt or anything... could it be the fuse or should i just take it to the dealer if its...


well it could be just a relay for the fan blower motor or a fuse. check all the fan positions..low med high..Its something you can fix but it if got about 600.00 dollars laying around .. take it to the Dealer..lol..Good Luck!!!

Nov 03, 2010 | 2006 Toyota Tacoma

1 Answer

Low and medium heater blower inoperative on 2006 toyota tacoma.


Resistor blown in heater. Follow the wires from the heater motor ( in foot well ) to a plug in the ducting between the fan and main heater body in centre of car. Unplug and remove the plate , it should be held in by a couple of screws. The plate should have a couple of wire coils of which , a couple will be broken. Replace resistor and heater should work.
Happy heating Marshall

May 05, 2010 | 2006 Toyota Tacoma

1 Answer

Replace fans behind dash vents on 2006 tacoma


there should be only one fan and its under the hood on the passenger side firewall. it takes about 30 minutes to change and its the only motor you will see of that side,its held in by three screws and a plug.

Jan 19, 2009 | 2006 Toyota Tacoma

1 Answer

2006 tacoma airconditioning problem


Replace the fan motor resistor, which is located in the blower housing, (under the dash, under the glove box) to the driver side of the fan motor. Held on by 2 screws. Common problem. I change a lot of them.

Jul 23, 2008 | 2006 Toyota Tacoma

Not finding what you are looking for?
2006 Toyota Tacoma Logo

Related Topics:

101 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

77544 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8826 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...