Question about 2004 Mitsubishi Endeavor

1 Answer

My front passenger widow won't go up unless I open the doors and hold the buttons on both front doors. The driver side will not go down at all. I saw some of the other responses to similar problems but they didn't really help me much. Does anybody know what the problem is?

Posted by on

  • john milligan Mar 31, 2011

    this is a little weird, it is acting like the ground wire is broken(?), take a jumper wire with alligator clips on it and see if connecting the door (at a nice bare metal spot) to a hard (engine or frame) ground point on the car will get it to work. ( I say that because the window only works when there is a load on the hinges making for a good ground)

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,319 Answers

If working with the door opened a wire between the door and the hing pillar has a short in it
you will need to open the rubber conduit up to inspect fot the broken or frayed wire(s)

Posted on Mar 31, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does the power window button blink on and off and the automatic feature doesn't work in the 2008 Toyota Sienna?


NOTE:
Anytime the batteryterminal has been disconnected, please initialize the driver's door power windowand front passenger's door power windowafter reconnecting the batteryterminal.

With ignition switchin the "ON" position, do the following:

1. Push down and hold the driver's door power windowswitch to completely open the window.
2. Pull and hold up the driver's door power windowswitch until the window closes.

Continue holding the switch for approximately one second until the switch changes from blinking to a constant illumination.
3. Check for proper operation of the "one-touch open and close" function by fully pushing the switch briefly to the "DOWN" and "UP" positions.

At this time the power window switchfor the passenger's door windowshould be blinking.
4. Push down and hold the passenger's door power windowswitch to completely open the window.
5. Pull and hold up the passenger's door power windowswitch until the window closes.
Continue holding the switch for approximately one second until the switch changes
from blinking to a constant illumination.
6. Check for proper operation of the "one-touch open and close" function by fully pushing the switch briefly to the "DOWN" and "UP" positions.

Feb 09, 2016 | Toyota Cars & Trucks

2 Answers

Passenger door can be opened from inside but not from outside...how too fix???


Remove the door lining and look inside by the lock. There is a linkage that has come adrift. To remove the door lining, remove handles, escutcheons, and arm rests. Using a wide blade screw driver gently pop the plastic rivets that hold the lining to the door.

Dec 02, 2015 | Cars & Trucks

2 Answers

Passenger widows can only be rolled down or up from drivers side. Front passenger can sometimes roll down window but not back up


Bad switch on passenger side. Could also be switch on drivers door not letting power go to passenger door

Nov 30, 2014 | 2008 Ford F-150

1 Answer

Windows on passenger side front and rear won't work, up or down.


He could have been more helpful and explained it's likely some broken wires in the door openings. Check carefully the wire harness in the front driver's door and in the passenger front door, where wires get stressed the most when opening and closing doors. The driver's window switch is the master switch for all windows, check there and the other doors openings for broken wires. Splice back together any broken wires you find and recheck windows. Hope you find it. If not there, but somewhere else in the harness, you would probably need professional help to find it.

Feb 15, 2013 | 2004 Mitsubishi Endeavor

1 Answer

2004 Audi Allroad Power window problem


Possibly a faulty driver door switch. There is a function tied to switch allowing driver to open or close all windows through door switch.

Dec 27, 2012 | 2004 Audi allroad

1 Answer

2007 passenger side widow won't go up


Faulty switch on passenger door, take out and replace or clean with crc cleaner

Oct 09, 2012 | 2007 Nissan Altima 3.5 Sedan

1 Answer

My passenger side front window (England, left) dosnt work properly. It goes down ok but it will not go back up unless operated by the drivers doors. (England, Right)


Hi, has your car got global closing. Sometimes they forget their memory, normally after pulling a fuse or flat battery. Open all your windows, sunroof if you have one. Press the lock on your fob and keep held down, all windows should close, this also works for opening when you keep hold of the open button, try doing this a few times, eventually it restores memory. I also have a 2001 focus.

Jun 02, 2012 | 2001 Ford Focus

1 Answer

The power windows are not working on 3 doors. What could be the problem? Just had a dead battery and jumped it off.


Most likely the RX lost the ECU program/ configuration. Need to reset the config. It is a sequence of buttons that need to be pressed.
You have to do the exact sequence of each door as it blinks or you cannot use your windows. Here are the steps.

first the driver window button will blink. lower the window half way down then raise the window up to max and hold the button for 5 seconds. Then the front passenger window button will light up and you do the same thing for each door as it lights up. It goes driver, front passenger, rear passenger side then rear driver side then do your sunroof by hitting the tilt button hold for 5 seconds and that calibrates all the windows.

Mar 07, 2010 | 2005 Lexus RX330

Not finding what you are looking for?
2004 Mitsubishi Endeavor Logo

119 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...