Question about 2000 GMC New Sierra 1500

1 Answer

Why my shifter indicator is not coming on? - 2000 GMC New Sierra 1500

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 41 Answers

if no shift indicatorthen it might be a cluster issue. Try replacing the cluster or have the dealer reprogram it for you. The shift indicator is a part of the wiring harness associated with the 'Prindle switch' on the driver's side of the transmission. If the wiring harness is fine and the cluster is reprogrammed and the issue still exists, then just replace the Prindle Switch. When removing the wires, make sure to heat up the wiring harness plugs with a lighter for about 10 seconds before trying to pull it out. The connectors come from the factory with this sticky sealant stuff that is like glue when it is cold...

Posted on Mar 31, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Light indicator of the shifter not working in the dashboard


there is a 15A fuse supplying the (EFI no.1) circuit which must be burnt because it controls:
  • Transmission Indicator
  • Engine Control
  • Engine Immobilizer System
This has to be your problem, hope this helps

25642380-klyeo5rdy0t5ttmsl3pzqeix-2-0.jpg

Apr 12, 2015 | 2000 Toyota Avalon

2 Answers

How do I remove the console shifter lever? and how do I replace the shift position indicator bulb? Thanks


Do a Google or Bing Search for "2007 (YEAR) Ford Explorer Shifter Light change" various blogs will come right up BUT the indicator is IN the Dash/Speedometer in the newer models and the shifter isin the Center Council....OR go to almost any of the Auto Parts stores and LOOK at their Haynes Manuals. MOST will change the light bulb for You!

Mar 13, 2015 | 2007 Ford Explorer Eddie Bauer

1 Answer

How to fix a shifter indicator dial on a 1993 Buick Century?


Hey Mike, that just means the rod has come off between the shifter and the indicator needle. Gonna be hard to get ot but it can be done.

Dec 01, 2014 | 1993 Buick Century

1 Answer

Shift indicator not working correctly


This is a common concern on explorer, shift indicator cable breaks.if you're the diy type this is a pretty easy repair. Remove steering column cover top and bottom, and instrument bezel.you'll see shifter indicator coming out of bottom of instrument cluster and cable wrapped around steering column, attached to the shifter.you'll have to remove 4 screws for cluster,7mm, tilt the bottom of the cluster and look where indicator is attached, usually 2 7 mm bolts or clips, remove and replace indicator...if the steering column was lowered without taking off indicator cable it would break cable, or could be band that wraps around column that's loose or broken..either way cheap fix..

Jun 25, 2014 | 2004 Ford Explorer

1 Answer

Smell something burning coming from gear shifter


Are all your gear indicators correctly lit on the shifter? On my car the continual heat of the shifter bulb over the years damaged the plastic holding the bulb socket so that the bulb and socket fell straight down and ended up in the carpet under the shifter, with the hot bulb in the carpet causing the burning smell. The fix? Take the console apart to access the bulb, replace the bulb with an LED one with no heat to speak of, then use electrical tape to hold the bulb and socket in the damaged hole in the console, then reassemble the console.

Mar 14, 2013 | 1998 Oldsmobile Intrigue

1 Answer

Gear shift lights don't come on a 2000 lincoln LS v6


Carefully remove plastic trim around shifter and ashtray/power plug.There should be two small lamps down inside under shifter indicator

Aug 09, 2010 | 2000 Lincoln LS

1 Answer

My pt is stuck in the reverse gear an wont come


look on the base of the shifter near the indicator there is a little cover remove it and poke down on it with a screwdriver or anything that will fit then move it out of gear

Feb 12, 2010 | 2001 Chrysler PT Cruiser

2 Answers

I have a 98 jeep cherokee 4L 4x4 automatic and the reverse lights dont work the bulbs are good and all fuses are too? any ideas


Reverse lamp switch wiring or switch itself is defective. Mounted on trans. Run slector lever over reverse with someone watching. the back.If yhey flicker the switch is bad. Work it several times sometimes helps .

Oct 28, 2009 | 1998 Jeep Cherokee

1 Answer

2008 Chevy Cobalt - care is running, but I can't turn it off! Go to park, try and move the key and it won't move to the off position to turn off the car


replace the shifter assembly.I replace alot of them.use this bulletin as a reference.Subject: Various Concerns With Shifter and/or Ignition Key (Replace Shifter Assembly/Shifter Components or Ignition Lock Cylinder )


Models: 2005-2008 Chevrolet Cobalt

2005-2006 Pontiac Pursuit (Canada Only)

2007 Pontiac G5

with Automatic Transmission 4T45-E (RPO MN5)

Some customers may comment on any of the following concerns:

• The shifter is hard to move or binds.

• They cannot remove the ignition key.

• It takes high effort to rotate the key.

Cause 1
The shifter button may be sticking in the handle.

Cause 2




The pin that activates the micro-switch may have moved out of position (refer to illustration above). This causes the micro-switch to fail to engage when the vehicle is placed in Park. If this condition is present, the customer will not be able to remove the key from the ignition.





The illustration above shows the switch in a correct position.

Cause 3
Metal flashing left in the cylinder may cause a high effort to rotate the key.

Cause 4
The slider may be binding in the guides. This may cause the shifter to become difficult to operate.

Correction 1
Verify that the shifter button is inoperative by evaluating if the park pawl pin on the shifter assembly moves when activating the button. If the parking pawl does not move when the button is activated, the shifter handle will have to be replaced. Refer to Floor Shifter Control Knob Replacement in SI.

Correction 2
Important: A change has been made to the shifter assembly for service. The replacement shifter assembly will read PRNDIL (Park, Reverse, Neutral, Drive, Intermediate and Low).

Verify that the micro switch is out of position. Replace the shifter assembly. Refer to Transmission Control Replacement in SI.

Correction 3
Important: Refer to instruction sheet that is supplied with the lock cylinder kit. BO 47869 is an essential staking tool and must be used for the repair.

Replace the ignition lock cylinder. Refer to Ignition Lock Cylinder Replacement in SI.

Correction 4
Replace the slide indicator and guides in the shifter following the procedure below:

Apply the parking brake.
Remove the upper console trim. Refer to Trim Plate Replacement-Console Front in SI.
Remove shifter knob. Refer to Floor Shifter Control Knob Replacement in SI.
Remove the indicator plate. Use a flat-bladed screwdriver to release the locking tabs.
Remove the shifter indicator lens.
Pull up on the indicator and remove it from the assembly.
Remove the two front rails by unsnapping the front and lifting up, and then back, to remove the rails from the shifter assembly.
Install the new guides. Place the hook end into the assembly and push down. It will snap into place.
Install the new slide indicator. With the transmission in neutral, place the slide over the shifter and into the guides. Move the slide indicator down the guides in the front and rear.
Important: Replace the shifter indicator lens if damage is present due to the slider binding or if it becomes damaged during disassembly.

Install the shift indicator lens.
Install the shift indicator plate.
Install the shifter knob. Refer to Floor Shifter Control Knob Replacement in SI.
Install the upper console trim. Refer to Trim Plate Replacement-Console Front in SI. post back with what you find.

Jan 20, 2009 | 2008 Chevrolet Cobalt

1 Answer

Automatic trany will not come out of overdrive


sorry only ever seen a manual here in spain but it sounds like a solonoid is gummed up underneath,where it would be i dont know .

Nov 13, 2008 | 1994 Ford Explorer Limited

Not finding what you are looking for?
Cars & Trucks Logo

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...