Question about 2001 Mitsubishi Eclipse Spyder

1 Answer

Ok, 2001 GT Eclipse Spyder..cranked this morning, both drive belts broke, harmonic balancer came apart..replaced balancer, belts, now it won't fire. I did find a piece of one of the drive belts intertwined in the timing belt. Thing is absolutely not getting any fire. Is the cranshaft sensor preventing this?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,399 Answers

Thanks for choosing FixYa and welcome to the site. It is possible that the crank sensor is the culprit. It could also be other things as well. If your vehicle is out of time, it is possible that the computer won't read it. It may be a cam sensor, distributor, coil, dist.cap, rotor, coil pack, or even the computer. Your best bet is to try and get a code or two by scanning the computer. If you can't get a code, test there parts with a voltage meter and see which ones get power and which one doesn't. If the car is out of time, it won't start. Make sure the belts didn't knock or tear other parts or wires. If you have any questions, just let me know. Thanks for using FixYa.

Posted on Mar 31, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 eclipse serpetine belt broke put new ones on now car turns over but won't start.


2001 GT Eclipse Spyder..cranked this morning, both drive belts broke, harmonic balancer came apart..replaced balancer, belts, now it won't fire. I did find a piece of one of the drive belts intertwined in the timing belt. Thing is absolutely not getting any fire.

Sep 23, 2015 | Cars & Trucks

1 Answer

I have a oldsmobile intrigue 2001 3.5 engine how do you remove the harmonic balancer pulley


remove drive belts
undo crank nut if there is one
fit a harmonic balancer remover puller
pull the balancer of
Note take care in the removal as there may be a crank sensor at the balancer
best get a workshop manual for photos on the job

Jul 02, 2015 | Oldsmobile Cars & Trucks

1 Answer

2001 ford tausu lower water hole broke and now won't start


I f the lower water hose was replaced ,,then check make sure the crank sensor was not knock off..Or the wire connector..It will be located around the harmonic balancer..Thats the lowest pulley on the car..

Sep 23, 2011 | 2001 Ford Taurus

1 Answer

Change a crankshaft position sensor on a 2000 eclipse


Is this a V6 or 4cyl???>>>(V6) This requires removing the Harmonic balancer (crankshaft pulley). Remove (R) front wheel, remove engine splash Guard, Remove crank pulley, remove lower timing belt cover. The Crank sensor is located behind the crank shaft pulley!! I highly recommend having this done by a certified tech, requires special tools. Hopefully this helps!!

Mar 11, 2010 | 2000 Mitsubishi Eclipse

1 Answer

I have a Kia Sportage 4wd 2002 with under 60000 miles. I lost power steering and when I took to mechanic they said I threw a belt(which they replaced with great difficulty) due to a bent or warped harmonic...


I got stuck paying dealer for new crank pulley not harmonic balancer as mechanic said. I am driving as little as possible until part comes in and can br put on. Hopefully, I will not damage the crank shaft or throw a belt.

Nov 05, 2009 | 2002 Kia Sportage

1 Answer

I have a 2001 Mitsubishi Eclipse Spyder GT. the


check your tran fld if its up something broke in your tranny it will have to be pulled and repaired or raplaced

Jul 12, 2009 | Mitsubishi Eclipse Spyder Cars & Trucks

1 Answer

Crank pulley for serpentine belts


Hello, Mitsubishi part number is - 030548995667.jpg

Nov 09, 2008 | 2000 Mitsubishi Eclipse

Not finding what you are looking for?
2001 Mitsubishi Eclipse Spyder Logo

181 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...