Question about Ford Focus

1 Answer

Power steering pump removal procedures for a 2006 Focus ZX4 2.0 with Manual Trans and a/c If this is (snorklebobby), my appologies, am having a heck of a time navigating through this site...i'm not very computer savy...kind-a-like water and oil....know what I mean? anyway thanks for you help, and if you can send the procedures that would be AWSOME !!! Tony ps... your quick response was wayy cool. Tony

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 14,337 Answers

Check this video out,will send 2 of them. 2007 Ford Focus power steering pump Here's the other one. 2007 Ford Focus 2 0 Power Steering Replacement . "IMPORTANT: To improve longevity of system, manufacturer recommends installing in-line filter to catch excess contamination, part number 70702"

Posted on Jul 25, 2017

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 12 Answers

SOURCE: removal of power steering pump on 1998 GMC Sierra 1500

you need a power steering pump puller the rest is simple any trouble let me know

Posted on Dec 24, 2008

MNfisherman
  • 11896 Answers

SOURCE: power steering repair

www.autone.com
select repair info
choose your car
see anything you want

Posted on Jan 16, 2009

jpstuhr
  • 49 Answers

SOURCE: Steering column removal procedures on

  1. Remove Air Bag Disconnect battery ground cable and remove left instrument panel sound insulator, lower trim panel or duct assembly, and steering column collar, as equipped.
  2. If column is to be disassembled, remove horn contact pad and steering wheel
  3. Push back seal to expose flexible coupling, then remove coupling pinch bolt.
  4. Remove lower column support bracket bolt, then the upper bracket to instrument panel support bolts and lower column.
  5. Disconnect column electrical connectors and shift indicator cable, if equipped.
  6. Disconnect shift cable at actuator and housing holder, then remove steering column.
d502e56.jpg

Posted on Feb 11, 2009

  • 1348 Answers

SOURCE: water pump removal (cant get power steering pump out)

put silicone RTV sealant on the gasket surface and it will not leak.
comes in a small tube for 5 bucks.you can actually use it instead of gaskets for things like thermostats

Posted on May 23, 2009

  • 1075 Answers

SOURCE: power steering pump Ford Focus 2006 DIY Manual

its quite quite simple;take your pipes of and block them off reconnect them to new pump and replace pump to in line belts.adrian;;;

Posted on Nov 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I need to find out how to remove the power steering pump on a 2006 pontiac grand prix 3.8L


Power Steering Pump Replacement
Removal Procedure
1. Remove the accessory drive belt.
2. Raise and support the vehicle. Refer to Vehicle Lifting.
3. Remove the tire and wheel assembly.
4. Disconnect the power steering pressure hose from the power steering pump.
5. Disconnect the power steering return hose from the power steering pump.
6. Disconnect the harness connector (4) from the power steering pump (1).
7. Remove the power steering mounting bolts from the power steering pump.
8. Remove the power steering pump from the engine.
9. Remove the power steering pump pulley from the power steering pump.
10. Remove the power steering pump reservoir from the power steering pump.
Installation Procedure
1. Install the power steering pump reservoir to the power steering pump.
2. Install the power steering pump pulley to the power steering pump.
3. Position the power steering pump to the engine.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the power steering pump mounting bolts.
Tighten the bolts to 25 Nm (18 ft. lbs.).
5. Connect the power steering pressure hose to the power steering pump.
6. Connect the power steering return hose to the power steering pump.
7. Install the harness connector (1) to the power steering pump (4).
8. Install the accessory drive belt.
9. Fill the power steering system with fluid.
10. Bleed the power steering system.
11. Operate the power steering system and inspect for power steering system leaks.

d2ff628.jpg
949e18c.jpg
a9ee201.jpg
*This originally came from abauto

Mar 24, 2011 | 2006 Pontiac Grand Prix

Tip

Replace the fan belt tensioner on a 2000 ford focus


The pulley wheel bearing on the auxiliary drive belt tensioner, which does not come as a separate part from ford, was showing signs of wear so I decided to replace the tensioner.

It's not a simple "whip the old one out" and "stick another one in" as the information in my Haynes manual suggests. In fact the information in my Haynes Service and Repair Manual - Ford Focus 1998 to 2001 (S to Y reg) Petrol and Diesel.

Also, looking under the car it appeared that the Power Steering Pump is bolted onto, or on top of, the tensioner which means the power steering pump may have to come off in order to remove the tensioner. Not so simple a job as the Haynes manual describes.

Investigation Work:

I have discovered there are three, 15mm nuts (Torqued to 48Nm) securing the Tensioner, two below the power steering pump and one above, identifiable by three protruding studs with T40 torx ends. An E8 torx spanner would be necessary if it were proposed to remove these studs.
In addition, I have also discovered that the power steering pump, secured with four, 10mm bolts, is bolted directly on top of the tensioner, piggy back style (There are four bolt holes in the tensioner body for mounting the power steering pump). So in order to remove the tensioner, it is also necessary to remove (and drain) the power steering pump. An alternative method of removing the tensioner might be to unbolt the pump (without draining) and move it to one side out the way while the tensioner is being removed.

Creating More Workspace:

It is necessary to remove the CAC to inlet manifold pipe (drivers side) i.e. the wide, black pipe bolted to the top of the engine, to gain access to the P.S. pump and move the Engine Coolant Resevoir to one side.
Also, to make the process easier and create additional space, it may be helpful to remove the following additional items from the car:
  • fuel filter (and plastic retaining clip).
  • oil filter (to make access easier to the nuts bolts and pipes from below the car)
  • the EGR cooler connection pipe (optional).
Essential Items:

  • 15mm Deep, Hex Socket and large 15mm Ring Spanner - tensioner mounting nuts
  • E8 Torx Spanner for removing 3 studs with T40 Torx ends (method 2 only)
  • 18mm (or 3/8W, 7/16BS) Crowfoot wrench for removing union nut on HP pipe power steering pump. (method 1 only)
  • 10mm ring or combination spanners, long and short (P.S. Pump).
  • 10mm, hex socket ( narrower 3/8" drive preferred) - power steering pump bolts (Methods 1 and 2)
  • Hose Clamp (clamping bottom hose power steering pump)
  • Teflon seal / o-ring for union on HP Line, Power Steering Pump or new union (See Notes 2 & 3)
Teflon O-ring:

Here is a general description of the "external" O-ring on the Power Steering Pump HP union. Someone may be able to find a supplier for the o-rings on the Internet Note that the "internal" black, rubber o-ring is also an integral part of the replacement union.
  • Colour: White
  • Material: Teflon (PTFE)
  • Cross Sectional Area: 1mm x 1mm (square)
  • Outside Diameter .......... 16.5mm
  • Inside Diameter .............14.5mm
Note that sizes are approximate as the o-ring may have expanded slightly as I was removing it from the union. The diameter of the groove the o-ring sits in is 14mm.

on Nov 01, 2009 | 2000 Ford Focus

1 Answer

How do I get my power steering pump out of 2002 yukon


Hello walker_227,

Removal Procedure:

SPECIAL TOOLS: You will need a power steering pulley remover and installer tool, DO NOT USE A HAMMER.

1. Remove the power steering pulley.
2. Raise the vehicle.
3. Remove the oil pan skid plate from the vehicle, if equipped.
4. Place a drain pan under the vehicle.
5. Remove the power steering pressure hose from the power steering pump from underneath the vehicle.
6. Lower the vehicle.
7. Remove the return hose from the power steering gearbox and the power steering pump.
8. Remove the bolt retaining the rear bracket to the engine.(See picture below)
9. Remove the bolts from the front of the pump.(See picture below)
10. Remove the pump from the vehicle.
11. Remove the bracket from the rear of the pump

Installation Procedure:

1. Reverse above procedure
2.Fill and bleed the power steering system.

netvan_20.png

Mar 14, 2011 | 2004 GMC Yukon

1 Answer

Need instructions for power steering pump replacement on a 1992 pontiac trans sport. FAST PLEASE!!! has a 3.8L engine with a/c. thankyou for your help!


-- from the 1990-1999 Lumina / Silhouette / TranSport Repair manual ---

1992 Pontiac TransPort Power Steering Pump REMOVAL AND INSTALLATION

  1. Disconnect the negative battery cable.
  2. Disconnect and cap the power steering pump hoses.
  3. Remove the accessory drive belt.
  4. Remove the power steering pump pulley using a suitable puller tool.
  5. Remove the pump mounting bolts and remove the pump from the vehicle.

See Figures 1, 2 and 3


0900c152801dbcf7.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 1: On some vehicles, you must use a puller to remove the power steering pump pulley


0900c152801dbcf8.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 2: Power steering pump mounting-early model vehicle shown


0900c152801dbcf9.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 3: Power steering pump mounting-late model vehicle shown

  1. Installation is the reverse of the removal procedure. Tighten the pump mounting bolts to 18 ft. lbs. (25 Nm).
  2. Bleed the power steering system to remove trapped air. Air in the system could cause noise and or damage to the pump.

BLEEDING

This procedure requires the help of an assistant.
  1. With the engine OFF, the wheels off the ground and turned all the way to the left, fill the fluid reservoir to the FULL COLD mark on the fluid level indicator.
  2. With an assistant checking the fluid level and condition, bleed the system by turning the wheels from side to side without hitting the stops. You should repeat this at least 20 times, making sure to keep the fluid level at the FULL COLD mark.

Fluid with air in it has a light tan appearance. This air must be eliminated from the fluid before normal steering action can be obtained.
See Figure 4


0900c152801dbcfa.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 4: Power steering bleeding procedure

  1. Start the engine, and while it is idling, recheck the fluid level and add as necessary to reach the FULL COLD mark.
  2. Return the wheels to the center position. Lower the front wheels to the ground and continue running the engine for 2 or 3 minutes.
  3. Road test the vehicle to make sure the steering functions properly and is free of noises.

See Figure 5


0900c152801dbcfb.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Fig. 5: Torque specificatio

Jan 02, 2011 | Pontiac Trans Sport Cars & Trucks

1 Answer

2006 focus zx5 power steering pump out--recall??


Sorry there is no steering recalls on this model

Mar 16, 2010 | 2006 Ford Focus

1 Answer

How to fit power steering pump to ford focus c max 1.6 zetec 06 plate


in the morning when I switch on the engine for the first time (after at least 12h of parking) in my ford focus 1.6tdci 05reg there is a noise coming out from under the bonnet on the driver side. it is getting worse when i start to move the steering wheel. after a 30 seconds and 100yards drive noise dissapears. would that ne a problem with the power steering pump...?? Cheers

Nov 16, 2009 | 2006 Ford Focus

1 Answer

Power steering pump Ford Focus 2006 DIY Manual


its quite quite simple;take your pipes of and block them off reconnect them to new pump and replace pump to in line belts.adrian;;;

Nov 14, 2009 | 2006 Ford Focus

1 Answer

Replace power steering pump on 93 pontiac trans am


you can buy a Haynes manual from Advanced Auto, Autozone. Its maybe $10. They have in-depth directions and pictures. Plus it will show you how to do lots of various other repairs. Happy Motoring!

Nov 04, 2009 | 1993 Pontiac Firebird

1 Answer

My ford focus 04 auto makes a grinding noise when the steering is on full lock to the right also the power steering fluid gets low very quickly


you have a power steering leak, when in full lock position the power steering pump is actually sucking in air and this is your noise. you will have to locate the leak and replace the leaking part and fill it to proper level.Ford will accept trans fluid for power steering fluid.

Apr 27, 2009 | 2005 Ford Focus

1 Answer

Power steering repair


www.autone.com
select repair info
choose your car
see anything you want

Dec 27, 2008 | 2006 Ford Focus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...