Question about Ford Mustang

2 Answers

89 mustang 5.0 my factory tint on the hatchback glass is so old i can not hardly see anything through it . can i get it off and if so . is there some sort of chemical to remove it .

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 27 Answers

You can use wax and oil remover, which you can find at a auto paint supply store. Commonly used to prep a car before painting in order to remove any oil or contaminates. Iv even used turtlewax bug and tar remover to get adhesive off of glass. Maby even paint thinner would work. The tint itself should be easy to rip off.

Posted on Sep 19, 2011

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 274 Answers

Goof off is a brand of solvent that removes anything. Thjat is if you need it, typically the tint on a window is a thin film that can be peeled off with a flat razor. Please rate the solution if this clarifies what you need to do.

Thank you!

Posted on Mar 31, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to reset fuel pump


There should be a fuel inertia switch that you press once to reset it. On my 1987 Ford Mustang GT it was located in the Rear Hatch area by my drivers side taillight. I had to remove the plastic to access it. look there first on most of the ford cars from the 1980's the switch was always in the hatchback area or truck. Some cars had easy access to the switch others where hidden. After you reset switch turn key to the power ON key position not turned over just one turn of your key ahead you should hear the pump prime....now do this 5-6 six more times this will build pressure in the hp fuel line. Turn hear over. Hope this helps you. Here's a few pic's of the switch's for your reference's mine had the white top the red top switch's came out in 89 or 90 model year fords if I remember correctly.
24944703-5aniyfjszz0gyt4fdct4pgs1-1-1.jpg

24944703-5aniyfjszz0gyt4fdct4pgs1-1-5.jpg

Aug 13, 2014 | 1986 Ford Mustang

1 Answer

How to remove tint and glue from side windows w/o ruining glass


Sharp razor blade. You can buy them from an auto shop pack of 5 - 100 i think. Takes ages but you just scrap the tint off. I have asked a tint shop 1/2 way through ding this & they advised me that was the corect method.

Jun 15, 2012 | 2000 Dodge Intrepid

1 Answer

How do I take the front window out of a junk yard 1992 cadillac sedan de ville ( no battery) without riping the tint?


I would worry about saving the glass from breakage. The tint will get scratched no matter how its removed. By the way most states ban tinted windows on the front doors of all vehicles. That is why the rear windows from the factory are tinted with the exception of Wisconsin. They ban tinted windows period

Jan 16, 2011 | 1992 Cadillac DeVille

1 Answer

The hinge that connects the piece of glass on the hatchback to the car has come loose. The screw in the hinge that connects the glass to the body of the car has come out of the hinge. How readily...


I work at an automotive recycling yard. Our yard has 5 of these and they take about 5 minutes to change the whole hinge for about 20 dollars. Hope that helps.

Nov 26, 2010 | 2002 Ford Explorer

1 Answer

How do you remove 89 convertible mustang rear seat


hit it hard (with the side of your hand or palm) at the bottom of the seat on the right and the left to relase the spring retainers, run a putty kniofe under the seat edge to locate the spring retainers

Apr 02, 2010 | 1989 Ford Mustang

1 Answer

How to change a fuse in a 1973 ford mustang , can't locate where the fuse box is


is'nt it located just above your left foot when your sitting in the car
73 those had the old glass fuses I've had some sucess using a popsickle stick with the end bent over to pry em out (carefull there glass) don't use anything Metal !

Oct 26, 2009 | 1966 Ford Mustang

2 Answers

Windows tint


If it's factory tint, it is imbedded in glass and can't be removed.
If it's add on tint, it is just a plastic film on inside of glass.
Call a tinting shop and ask what chemical to spray on film to soften adhesive, or ask for removal quote too

Aug 26, 2009 | 2002 Mercedes-Benz C-Class

1 Answer

89 ford mustang convertible


This is a professional job for a conv. top shop. has to be sewn in at the bottom.

Removal
NOTE: Mark vinyl to be removed so it can be returned to the same position after disassembly.
  1. Remove sail area panels as outlined.
  1. Remove staples retaining elastic straps at each side of back window glass (42006) to rear tacking strip and folding top rear number 4 bow (51278) and remove elastic straps.
  1. Remove staples retaining rear bow corner pad (537A71) and bottom of folding top back window curtain (52500) to rear tacking strips.
  1. Remove staples retaining top of folding top back window curtain to folding top rear number 4 bow and remove back window glass .
1994 mustang. don't have 89 Window, Rear Installation
NOTE: Transfer markings from the removed assembly.
  1. Mark with grease pencil center point on folding top rear number 4 bow in line with hole on rear of folding top rear number 4 bow .

Oct 07, 2008 | 1989 Ford Mustang

1 Answer

89 mustang 5.0 starter stuck on


The ignition switch isn't hard to replace. Take the column covers off and you'll have to buy tamper proof torx bits to remove the mounting screws. Just unplug the old switch and plug in the new one. The new switch will have new mounting screws with it. It should only take you 20 minutes to replace it even if you've never done it before. Check the operation of the lock and tumbler as well. It's an easy replacement as well. This one only should take you 5 minutes.

Oct 05, 2008 | 1989 Ford Mustang

1 Answer

The rear window on my 2006 Mustang GT has white perfectly round white spots on it and now the drivers side window is getting the same type of color streaking. I have searched and viewed "hard...


Wax may have clouded
Invisable glass is what we use to restore nasty windows or windows with rainx or other window waxes .... use newsprint to remove the Invisable glass .... comes in either a spray or aersol ..... keep it off the paint
LB
I have a plan B if this fails

Sep 22, 2008 | Ford Mustang Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...