Question about 1996 Nissan Maxima

2 Answers

My car is not moving, it goes in gear and idols like it wants to but some things not letting it go.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Nissan Master
  • 2,019 Answers

Do you mean the engine will not rev up to high enough speed, or do you mean the transmission is slipping?
Check the ATF level in the transmission to see if it is low, and if it is dark, brown, or smells burned.
It should be pink and smell nice.

Posted on Mar 30, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Nissan Master
  • 6,826 Answers

Have the axles checked on both sides,left,and right,see if they are dislodged from the transmission,or broken inside the boots or the cv joints,if one axle is dislodged ,or broken,your car would have these symptoms.Also check the transmission fluid to make sure it is not low ,by checking the dip stick with the car running in park.

Posted on Mar 30, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When I idol my 1989 toyota corolla 2e 1300 4 speed Manual Transmission car without pressing clutch it goes into gear I have changed the gearbox clutch and pressure plate and releaser bearing and fork.......


If the car will not shift after engaging the clutch and trying to move the stick, take a look at the fluid to make sure that it is at the right level. Other causes include using the incorrect thickness (type) of fluid and the clutch linkage or shift cables needing adjustment. The source of the problem could also be the vehicle's computer system. If you've already inspected the fluid, you can try resetting it. To do this, detach the battery and let it stand for thirty minutes. Then, reattach and allow the system to reset itself. This usually takes around thirty minutes. If this doesn't work either, then it's time to take it to a mechanic

Dec 28, 2014 | Cars & Trucks

1 Answer

I have a 1989 RS camaro that won't move! Clutch


How do you know it goes into gear if it won't move ?
Can you put it in gear and move the car with the engine off ?

Apr 26, 2013 | Cars & Trucks

1 Answer

My 1985 Fiero is hard to start and when it starts it idols but when I put it in gear it goes dead ?? I put in a new Idol control valve and a new Throttle position sensor, I did notice when I put the TPS on...


try the fuel presure regulater it should be on the fuel rail ( that is if it is the V-6 ) it hasone vacum line on it and it has i think like 6 screws holding it in. it will cause just that same problem it will also cause it to flood at idle and foul plugs and make it idle rough you may have to chage the plugs also. you might check the vacum to. it should run on stright vacum from the intake.

Aug 20, 2011 | 1985 Pontiac Fiero

1 Answer

I have the driver side window only goes up and down when the car first starts in the morning but doesn't work after that can you tell me what to check or do? Also when I start to take off the automatic...


Fist the eay thing. Find the PCV valve when you find it the hose is either torn or when its idling it collapses. this is one problem now go to the air flow duct you know the hose that come out of it follow each one is there anything torn and worn at the other end. It will be a yes cause this is what causes the motor to surge. Now for the doors. your switch motor is making contact somehow it will be broken internally now the door lock automaticly when you put it in gear that the way they design it. So let me know what you find

Apr 22, 2011 | 2002 Ford Taurus

1 Answer

HESITATES


No. What engine? 4.3? Check the plug wires and distributor cap

May 09, 2009 | 2001 Chevrolet S-10

1 Answer

Honda CR-V - 2004 - High RPM not returning to Idol RPM ????


i'am no expert on this car, but i would chk. the T.P.S. (throutle positioning sensor) there also may be carbon build up on throutle butterfly, not letting it close completely when you take your foot off the pedel.

Jan 14, 2009 | 2001 Honda CR-V

1 Answer

Goes into gear but won't move more than 2 inch


remove rear driveshaft, jack up rear wheel, try to rotate each wheel. let me know if they move freely.

Dec 09, 2008 | 2000 Chevrolet Tracker

Not finding what you are looking for?
1996 Nissan Maxima Logo

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...