Question about 2007 Chevrolet Uplander LS Minivan

Open Question

On my chevy uplander van the service ABS system light, service traction, service stability comes off and on but does not stay on what is up?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: abs light/traction control light

You can check out what the trouble code is by pushing and holding the information button and the up arrow (right side of instrument cluster above the radio) until all the instrument clusters light. Press the information button (last) to enter test mode. I've had an error C1234, meaning Left rear wheel sensor fault. I found the problem to be a corroded connector under the chasis just under the rear left door about 2 feet in. I had to by-pass (replace 1 wire due to corrosion at the connector.

Posted on Sep 15, 2009

lesabre1972
  • 474 Answers

SOURCE: abs light comes on,along with traction off

It could be the cause if something happend to one of the wires going to the ABS sensors at the wheels.

Posted on Feb 16, 2010

dj_relly999
  • 4070 Answers

SOURCE: 2001 Olds Aurora 3.5 . ABS,BRAKE,TRACTION OFF

Hi! Sometimes this is caused by a faulty abs sensor. Two things to deal with it... you can clean the contact and if no luck on it have it replaced. Hope this helps and thank you for using FixYa!

Posted on Oct 10, 2010

  • 1168 Answers

SOURCE: My stability system and traction

Hello Tip.

All three systems rely on some of the same sensors in order to operate.
In this case most likely is wheel speed sensors. By far the most common problem.
The system will need to be scanned to find out which is the offending one and be repaired.
Not all scan tools have the capability to read ABS systems. Make sure whoever you take it to has this available. Most good shops will have this.
If you have further questions on this, please ask me here, be glad to help.
Thank you for using FixYa.

KL

Posted on Jan 17, 2011

  • 1915 Answers

SOURCE: service stability system light came

ABS and traction control issues are common on these years of GM (late 90's, early 00's) and can usually be traced to something getting 'caught' on the sensors (look like sprockets)-take the car to a high-pressure carwash and have the undercarriage cleaned, or do it yourself at he places that have hand-held wands. Even a heavy concentration of dust on those sprokets can cause this.

Posted on Feb 28, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

07 chevy suburban ltz 4x4 6.0 traction control light and service stability light come on at random times, sometimes making check engine light come on with code p0011 cam sensor


as to the traction/stability trac check hub and abs sensors [wires and connection ] these systems are not tied into the cam sensor but ---look for wire chaffing in the harness by the cam sensor the harness may have the wiring from both systems in harness

May 31, 2016 | Cars & Trucks

1 Answer

2005 chevy uplander


there is no c0400 there is a c0040 left front wheel speed check the wiring at the speed sensor about 3 to 6 inches from the conector on the body harness for a brake in the wirring

Apr 01, 2014 | Chevrolet Uplander Cars & Trucks

1 Answer

I have a 2007 Chevrolet uplander van I keep getting three messages , service the ABS system, service the traction system and service the stability system. I have changed front brake pads what else do I...


when you do the pads you will notice wires coming out of the front hubs clean up the plug ins .. its for the abs if the contacts get dirty your lights come on . start here other wise it can get complicated. do the same at rear i dont know if you have rear disc brakes you may not ??

Nov 21, 2013 | Cars & Trucks

1 Answer

07 uplander. abs/traction control/stability control service light comes on intermittently most often after idling for a few minutes. A reputable repair shop replaced both front bearings thinking this


if the abs light comes on then there is a code in the abs module to direct you to the problem. find out the code first, then start digging to find the source of the problem. as intermittent as it is it does sound like an internal module problem,but it will set a code in memory if it is the case.

Jun 05, 2012 | 2007 Chevrolet Uplander LS Minivan

1 Answer

Service abs system light comes on all the time. both front wheel bearings have been replaced, abs light stays on.


i had the same problem with my 2005 chevy uplander. the ABS lights kept coming on. The fix for me was... I had a damaged and old battery(the original battery). If your still under warranty or not I would suggest you check this out by using a new battery to see if this is your solution.

Dec 16, 2011 | 2006 Chevrolet Uplander

1 Answer

My traction control and stability system light has come on and now my front end feels unstable. What could be the issue? Is it going to be a costly fix or something I can do with the assistance of...


I had the light come on and it turned out to be the abs wiring harnes to the rear wheel had been damaged by a rock. Resodered the wire and the light went out and the traction control system works again.

Aug 09, 2011 | 2008 Chevrolet Uplander

1 Answer

WHILE DRIVING DOWN THE ROAD THE ABS LIGHT CAME ON ALONG WITH THE TRACTION CONTROL LIGHT.WE BEGAN GETTING A SERVICE TRACTION CONTROL SYSTEM,FOLLOWED BY SERVICE STABILIZATION SYSTEM,FOLLOWED BY SERVICE ABS...


All are tied into the ABS system, traction as well as stabilization, This needs to be looked at by someone who can hook up a diagnostic tester to read the fault codes stored in the ABS system then perform the correct diagnostic procedures to isolate the problem

Jan 03, 2011 | Buick LaCrosse Cars & Trucks

1 Answer

My compressor quit working on my 2006 chevy uplander but before i replace the compressor its self is there something simple i can check first also, on my info center the abs, traction control, &...


Anything a/c related is best left to a mechanic. You prob have a freon leak somewhere. Try adding a can or 2 to see if that works.
As far as the other lights, they prob just need their recommended servicing.

Feb 03, 2010 | 2006 Chevrolet Uplander

Not finding what you are looking for?
2007 Chevrolet Uplander LS Minivan Logo

Related Topics:

1,076 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...