Question about Honda Civic

Open Question

Need torque specifications for rocker arm assy on a 2004 honda civic lx, 1.7 litre

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: need torque specs

Valve Rocker Arm Bolt 19 N·m + 30° (14 lb ft+ 30°)
A GM dealer shows me another source, which says 32 Nm (24 lb-ft). Not sure which one is right but they screwed up my car.

Posted on Mar 17, 2009

  • 1 Answer

SOURCE: 2004 pontiac grand am 3.4 rocker arm torque?

the rocker arm torque specs for the la1 gm 3400 sfi v6 is 168in lbs or 14ft lbs and 30degrees past that hope that helps you it came straight from my local dealer!

Posted on Apr 16, 2009

  • 14036 Answers

SOURCE: What are the torque specifications for rocker arm

torque 89 inch pounds then plus additional 30 degree turn.

Posted on Nov 19, 2009

  • 173 Answers

SOURCE: what is the torque of the rocker arms on alero 2003 3400 engine

14 ft/lbs first pass on all then an additional 30 degrees for all on final pass ..by the way 1 bolt flat to the next bolt flat is 60 degrees so all nuts get half a bolt flat final torque if ya wanna throw caution to the wind torque it to 16 ft lbs and be done with it. lol these specs are from gm ok. good luck and ps the intake pushrods are shorter than the exhaust pushrods and there is no clearance if you get them in wrong an apprentice found this out 3 years ago and a lot of people saw what happens lol..good luck

Posted on Nov 24, 2009

  • 1 Answer

SOURCE: Need torque settings for rocker arms

7.416666667 ft lbs or 89 inch lbs

Posted on Nov 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What are the spark plug torque Specs on a 95 Honda Civic LX 1.5 liter.


Torque Chart - E3 Spark Plugs

e3sparkplugs.com/torque-chart/
The table below lists the torquing specifications for most spark plugs being installed in either cast iron or aluminum cylinder heads. Torque values assume clean, dry threads.

Tech Specs - Spark Plug Cross Reference, Torque ... - Autolite


Nov 25, 2015 | Honda Cars & Trucks

1 Answer

Rocker arm actuator


Honda Civic 2004 has manual adjustment on it. It can easily be adjusted with at least a little skill. Any mechanic can do it very easily at the most reasonable and affordable price. It is a task not more than 40-45 minutes.

May 28, 2013 | 2004 Honda Civic

1 Answer

I have oil leakin on top of my spark plug wires in the tube ive changed the valve cover gasket 3 times i even put high heat cilcone over around the spark plug tubes but all it does is slow it down im not...


Two things:

1. Make sure you torque the bolts down to the right specification, which is 83 inch pounds (or about 7 ft lbs). Work opposite end of the cover and start with a lower torque first (like 50 in lbs), then go up to 83. It's just a good practice.

2. If that does not work, get a Fel Pro gasket set VS50365R (pic below). What is special about this set is the really thin o-rings there in the middle. Those are the rocker arm tube seals. You need to take the rocker arms off in order to replace them, but this way you're doing a complete job and you probably won't have that issue again. If you don't want to get the whole set again (since you already replaced most of it 3x over), you can probably just go to a honda dealership and pick up the 4 you need.


44db60b.jpg
Here are the seals under the rocker arms:

ea6e49b.jpg
If you decide to do this yourself, it's a good idea to get a set of feeler gauges so you can properly gap the clearance from the rocker arms to the valves. Intake valves should be gaped to .010 in, and exhaust valves to .012 inches. Also, yes, you can take the rocker arm assembly off without removing the distributor...just take off that one bolt that is in the way. The torque for the bolts holding in the rocker assembly is 9 ft-lbs for the smaller 6x1mm bolts and 16 ft-lbs for the larger 8x1.25mm bolts. Here is the torque sequence...

94f3f23.jpg

Oct 06, 2010 | 1992 Honda Accord

1 Answer

Something in my valve train is ticking, louder when cold or upon start up. It sounds like one colapsed lifter as I can count the clicks.I was told this 2000 honda civic lx dosent have adjustable valves so...


REMOVE THE VALVE COVER AND CHECK THE ROCKER ARMS WITH GAUGE OR JUST TRY TO SHAKE THEM FOR FIGURE IT OUT LOSE ONE. CHECK THE LIFTER SEATS IF ANYTHING BLOCKING THE OIL PASSAGE TO MAKE ITS JOB.IF YOU GONNA REPLACE GET TORQUE SPECS OR IF ANY ADJUSTMENT REQUIRED.

Jan 14, 2010 | 2000 Honda Civic

1 Answer

What is the rocker arm torque (ft/lbs.) for a 1995 honda civic dx with 1.5 16 valve ?


OK here you go. there are three different engine codes for that model and engine size. first is the D15Z1. This one is 14ft.lbs. Then you have D15B7 and D15B8 these two are the same at 16ft.lbs.

Jul 07, 2009 | 1995 Honda Civic

2 Answers

2004 pontiac grand am 3.4 rocker arm torque?


the rocker arm torque specs for the la1 gm 3400 sfi v6 is 168in lbs or 14ft lbs and 30degrees past that hope that helps you it came straight from my local dealer!

Apr 05, 2009 | 2004 Pontiac Grand Am

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

173 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...