Question about 1991 Mazda 929

2 Answers

I have a 1991 Mazda 929. I am having problems starting it. The battery is a good battery, however I do not think it is getting enough gas to the engion. I do not know if I need to replace the fuel pump or the fuel Filter. What should I do. I have gotten it to start a few times by pumpping the gas however when I turn the car of it will not start.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a 1995 mazda 929 v6 i am having problem starting it.the battery is good however ithink ther is no spark

Posted on Jun 05, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,399 Answers

Thanks for choosing FixYa and welcome to the site. When you first turn the key, you should be able to hear the fuel pump kick on. You should hear a buzzing sound for a second or two. It may be the fuel pump, clogged filter, bad injectors, fuel pump fuse, relay, or reset, if equipped. It could be in the ignitions. Let me know if the pump is kicking on and we will take it from there. If it is not, check to see if it is the fuel pump fuse or relay. I am not sure which ones you have. It should be marked in the fuse box though.

Posted on Mar 30, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1993 Mazda 929 checked battery and starter is good turns over but wont start?


problems include
cam/ crank sensor failures
immobilizer not operational
flat fob key battery
broken timing belt /chain
ecm problem
no fuel pressure
run the fault codes to find the area ans sensors at fault

Jan 08, 2017 | 1993 Mazda 929

1 Answer

1990 mazda 929 the instrument/ignition panel lights stay on, drain battery and now it wont start


Wow this model still exists i only thought this age of car could be found in the museum ,anyway sounds like the ignition switch has failed ,dont think new ones are still available for such a old vehicle

Sep 02, 2013 | 1990 Mazda 929

1 Answer

91 mazda 929 valve cover gasket leaking


I doubt the gasket is the entire problem

Why wouldn't you replace the valve cover
gasket,then explain the driveability ones?

Dec 08, 2012 | 1991 Mazda 929

1 Answer

I start my mazda 929 and when i hit the gas it dies


Any vehicle needs a good working fuel pressure fuel filter, When you put a load it needs more fuel, 3_17_2012_7_41_54_pm.jpg

Mar 17, 2012 | 1994 Mazda 929

1 Answer

My 91 929 mazda starts and runs fine in reverse but wont go into drive. ive checked transmission fluid and everything i can think of. is the transmission out or am i missing something?


so it physically wont go into drive, or you shift into drive, but wont move? did it act OK before this? sounds like trans is bad.

Sep 12, 2011 | 1991 Mazda 929

1 Answer

Have an 88 mazda 929 it wont start without jumper cables. It will stay running but if it is shut off it wont start again.


you need to have the battery tested, i think all that is wrong is the battery is bad.

Apr 26, 2011 | 1988 Mazda 929

1 Answer

My 1992 mazda 929 will start time to time it turns but it not getting the fire to start every time what should i do???


I'm having the same problem now with my 95 mazda 929, i'm being told it could be 1 of 3 things if the starter is good, it could be the neutral safety switch, starter relay, or the ignition switch going bad

May 21, 2010 | 1992 Mazda 929

1 Answer

How do I set a timing belt for a 1989 Mazda 929


You need to get a manual. Try the Haynes manual for your car. Try autozone; generally available for around $20. This is not the type of thing that can be covered here in enough detail to do you any good. You need a picture.
Buy new timing belt. Disconnect negative battery cable. Remove timing belt cover. make sure cylinder #1 is set at TDC. making sure all components are properly aligned and loosen pensioner to remove old timing belt. Install new timing belt. Tension belt, ensure all components are aligned properly, replace timing belt covers and reconnect battery.

Feb 20, 2010 | 1989 Mazda 929

1 Answer

Brake light on every time.


Hi,

Check the foot pedal switch first to see if is working correctly and not stuck, and that the pedal actually disconnects when returned.

If this is ok, you will have to trace the live feed back to the source, starting at the bulb, and working back.

Are you certain it is the brake light, and not a rear side light? These can be left on when the ignition is off, wheras brake lights usually can't

Jun 20, 2008 | 1991 Mazda 929

Not finding what you are looking for?
1991 Mazda 929 Logo

213 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...