Question about Oldsmobile Cutlass Ciera

1 Answer

I have a problem no fuel to injectors changed pump checked spark fuel is right up to motor ,But injectors wont fire , how can I fix this ? Is ther a way to wire power to injectors seprat on a switch ,Or Is it something to do with anti theft I can take off wires and put on swith also ? Please help so confusing 94 oldsmobile cutlus cierra

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 11,896 Answers

If you are not getting fuel to injectors, and you have a new fuel pump that is getting power and you can hear it run for a few seconds with the key on - engine off, then you most likely have either a plugged fuel filter or faulty fuel pressure regulator.

You can go to autozone, com and register for a free account. Then login, choose vehicle year, make, model, engine size. Lastly, click on view repair manual. Now you have a free repair manual for your car.

If you do not have power to the pump, check that the safety switch for the fuel pump didn't go off. Should be down my passenger or driver kick panel.

Posted on Mar 30, 2011


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My 1993 Dodge Dakota 3.9l v6 4x4 magnum wont fire it will crank over but no fire? The fuel pump relay, crank shaft sensor , spark plugs and wires were replaced. I don’t know a lot about this no fireing...

check the compresion in all cylinders 100 psi (compression good) check the spark -check the fuel pressure.30 psi at gauge with switch on.(if no keep pressure with switch off injectors or fuel pressure regulator are bad
check the signal to the injectors (get little injectors tester at autoparts) if no signal check the ground to the injectors black wire
or the other wire (computer)= good signal to injectors and good fuel pressure and good spark (defective injectors)

Oct 16, 2017 | Dodge Cars & Trucks

1 Answer

No spark 1999 volvo s 80 but has fire to inj..but wont spray

what have you actually got

no spark is from cam/crank position sensors faulty, faulty ignition control module
but you say fire to injectors -- do you mean power to injectors
if you have power but the injectors are not squirting---low /no fuel pressure = faulty fuel pump / no power to pump , faulty pressure regulator , pump relay problem
At this point check for a broken timing belt/ chain

Aug 13, 2016 | Volvo Cars & Trucks

1 Answer

98 dodge ram 1500 5.9 truck has been sitting for 2 years with a blown ****** got the ****** rebuilt and installed it back in the truck but wont start has spark and fuel at rail but injectors wont fire

98 so its a older vehicle ?? Well i know nothing about layout of this american vehicle but for its age check the fuel rail as on the end is a vacumn controlled valve so make sure its connected and the vacumn pipe isnt cracked or perished ,Anything else i have no idea sorry dont see these motors here in spain very often unless its on a imported camper van but these are normally all diesel ,have seen a 7.2 litre ford E350 petrol though but running on a gas conversion

Mar 09, 2013 | 1998 Dodge Ram 1500 4WD

2 Answers

Fuel pump went bad fixed that now my car wont start

Now you check fuel pressure at motor with a gauge

Also check for spark & injector pulse while cranking

Dec 15, 2012 | 1996 Nissan Maxima

1 Answer

The dash gauges all work , fuel pumps are both good , the fuel pumps wont come on and the truck trys to fire when i turn the ignition on but wont , could this be a fuel regulator

did you check the fuel pressure pump on the frame rail for power and ground? have you verified no ignition spark to the spark plugs? have you checked for fire from the coil to the distributor cap? does the check engine light come on when you turn the key on? have you check for injector pulse and power at the fuel injectors? if the fuel pump won't come on and you have no ignition fire and no injector pulse, all of these systems are triggered by the ECM.

Aug 12, 2011 | 1990 Ford F150

1 Answer

I have fuel and I have spark why wont it start?

Not sure what vehicle you have, but...
You need spark at the spark plugs (Check a few or all of them)
Even if you have fuel pressure, you also need the injectors to "fire", so there are two stages for the fuel delivery, fuel pump and injector fire.
You need good compression on your cylinders, and finally, if your timing belt or chain has slipped or broken, you wont be able to start it.

Jun 11, 2010 | Cars & Trucks

1 Answer

Fuel Pump And injector. And will not turn over

This problem can be caused by many things. But, the ignition module is responsible for firing the spark plugs, then sending the spark signal to the PCM so the PCM can fire the injectors and run the pump. The module gets a signal from the camshaft position sensor. I just fixed this problem on a Saturn and it ended up being a bad EST wire from the module to the PCM. It can also be a bad module or a bad fuse on either system. Check all of the fuses under the hood and inside the car. The module can be removed and tested for free at Auto Zone.

Apr 23, 2010 | 1995 Buick Riviera

1 Answer

I have a 1988 toyota pickup with the 22re motor it has plenty of spark,and turns over but wont fire i also replaced the fuel pump and still nothing what else could it be?

Check all the fuses,and check the fuel pump relay,if this checks out o k,See if there is fuel pressure at the fuel injectors,if there is,then the injectors are not pulsing.The cause of this is the pick up coil in the distributor,but replace the distributor as a whole,this has all the components in the distributor,That control the fire,and the pulse to the injectors,A used one might be more economical sound money wise.

Jan 20, 2010 | 1988 Toyota Pickup

2 Answers

1989 suzuki samurai won't fire has a 1990 Geo tracker motor fuel injected 1.6 8 vaulve.

Check if you are getting spark in your plugs. if there's a spark, check the fuel pressure.Your pump might not be delivering the required pressure and volume.
If there's no spark, check your ignition system components.

Aug 02, 2009 | 1987 Suzuki Samurai

1 Answer

97 jimmy wont start

Check for a bad distributor cap and or rotor..........a bad cap and or rotor can caues firing (cross fire)across the terminals and introduce spark to the wrong cylinders at the wrong time.......
hope this helps.....good luck!

Dec 14, 2008 | 1997 GMC Jimmy

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

136 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts


Level 3 Expert

79024 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides