Question about Chevrolet Chevy

3 Answers

What direction do the cables go around the drum for the windshield whipers on a 1957 chevy passanger car?

Posted by on

  • 3 more comments 
  • trapgun Aug 04, 2008

    I can not tell by the diagram on the link provided which way the cables feed through the drum for the cable.

  • trapgun Aug 04, 2008

    I need the instructions for inside the dash, it has cables and a drum, I need to know how it goes around the drum.

  • trapgun Aug 04, 2008

    Thank you. This article I believe is what I need. I will check it out. You were very helpful.

  • trapgun Aug 04, 2008

    Thank you. This article I believe is what I need. I will check it out. You were very helpful.

  • trapgun Aug 04, 2008

    Thank you. This article I believe is what I need. I will check it out. You were very helpful.

×

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Chevrolet Master
  • 60,741 Answers

1998 vw new beetle

Posted on Aug 05, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 319 Answers

I have found an article that addresses your problem, please read it !

Good Luck,

Brian

Posted on Aug 04, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,487 Answers

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Driver windshield whipers dont work miss side of car by 6 in


Check the mounting bolts for the wiper motor. Two may be missing. If the motor shifts or rotates, it throws off the geometry of the mechanism.

Dec 19, 2011 | 1998 Saturn SL

2 Answers

All at once my wipers, radio and heater fan stopped working while driving home from work. I have changed many fuses and still not working. Thought there may be a relay switch for this but the GM dealer...


Sounds like your have a bad auxiliary heater relay switch another relay with the same part niumber in the fuse box this will tell you if its bad or not

May 10, 2011 | 1998 GMC Safari

1 Answer

I an '03 Chevy Venture van whose windshield wipers won't go down.


Your windshield arm is in need of repositioning. Take off the cap on the windshield arm and loosen the nut under the cap. Reposition the arm so that it faces 180 degrees flat to the passenger side of the car. Tighten the nut. This should solve the problem you've described.

Apr 11, 2010 | 2003 Chevrolet Venture Passanger

3 Answers

How do I change the battery on a 2003 venture


For the 03 Chevy Venture you have to do the following to replace the battery.

1. Remove the windshield whiper motor cover
2. Remove the screw retaining the underhood fuse/replay panel to the fender brace. Disconnect the cable from the negative termainal.
3. Detach the fuse/relay panel from the fender brace and move it aside. Remove the fender brace.
4 Disconnect the cable from the positive battery terminal

Jan 12, 2010 | 2003 Chevrolet Venture Passanger

1 Answer

Passanger side windshield wiper, chevy celebrity 1989


You should be able to access all the screws for the Windshield Cowl with the Hood Open for the Inside ones and Closed for the Ones on the Top outside.

Jan 04, 2009 | 1990 Chevrolet Celebrity

1 Answer

How to put front breaks on a 1999 chevy automatic cavalier


Place the bike on a stand, disconnect the cable, remove the wheel, set the wheel brake side up, use the bolt slightly inserted in the drum, or two oposing screw drivers around the drum to pull it from the wheel. Once pulled, remove the springs and shoes,lightly sand the inner drum on the wheel, install new pads and springs, spray both drums with brake clean, reassemble drums and wheel, install the wheel, and then adjust cable tension and brake pressure at first the wheel, and then at the bars. Test and readjust as needed.

Jun 17, 2008 | 1999 Chevrolet Cavalier

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...