Question about 2000 Chevrolet S-10

1 Answer

2000 s-10 4 cyl. truck runs good gas gadge gose from full to emty with a full tank or emty tank dose not matter? whats the fix!

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Had the same problem on my 2000 s-10 ,turned out the wire from sending unit had worked loose(bad crimp). The fuel pump had recently been replaced. the connector to the sending unit was different from original . the new pump included the different connector ,but it had to be spliced in .Check connections at tank/fuel pump.Also there were 3 ground connections 1 tank to frame 2 bed to frame on my s-10 hope this helps

Posted on Apr 01, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1999 Mitsubishi montero and i bought it used the gas gage will not go to full when i fill it up and when it dose move it only gose to quarter tank mark and rarely. Gose to half tank mark


Sounds like a bad float or weak gauge.you can always use the miles trip to predict how much fuel you have left in cases like these the trip can be your best friend.have someone experienced change the float in the tank then if not float change gauge but like i said someone that knows what they are doing if not they can mess the entire dash up and short alot more than you would think out so try float or gauge if it has over 150k miles its probably the float.

Apr 26, 2017 | Mitsubishi Cars & Trucks

1 Answer

2002 Buick renedivous my gas gauge fluctuates from having gas to empty what would cause this?


Hi,just go to the gas tank and pull out the foat sender unit and replace should be job done.most of the time its the sender unit that gose and not the gadge,all the best.

Apr 17, 2015 | Buick Cars & Trucks

1 Answer

Gas gauge goes full emty full emty gaugegenerly reads full but latly its up and down truck runs then wont


You need to test the gauge and the sending unit in the gas tank itself. In most cases I find this is the sending unit in the tank. Unfortunately, that is usually combined with the fuel pump in 1995 and newer vehicles which means you have to replace the whole unit. If you have 2 opening to your tank with wires coming from both you have a separate level sending unit from the fuel pump. If there is only one they are combined. Check for shorts on those wires.

Jul 29, 2011 | 1999 Chevrolet Silverado 1500

1 Answer

The fuel gage is stuck on "full." and does not function as gas is used


a fuel gage if grounded out gose 2 full look 4 a bare wire grounding out someware or un plug gage and see if it goes 2 empty if it dose replace sending unit good luck

Apr 04, 2011 | Buick Century Cars & Trucks

1 Answer

Gas gadge doesnt move...how do i fix?


if your gas guage is readin full it is ground problem,if the guage is readin empty,it is in the tank as in the guage unit which is a separate unit beside the fuel pump

Jan 06, 2011 | 1992 Honda Accord

2 Answers

The gas gadge is stuck on full why


Hi, The float on the gauge in the gas tank may be stuck in it's uppermost position ! Lift the blanking plate on top of the gas tank and check float freedom of movement ! Good Luck

Dec 12, 2010 | Ford Expedition Cars & Trucks

2 Answers

Gas gage read full when empty and sometimes emty


You have a bad fuel level sensor.The fuel tank needs to come out and the sensor replaced.You don`t have to replace the pump assembly.You can get the level sensor separate.I`m not sure if the parts stores have it but I know the dealerships do.Hope this helps.Good luck.

Mar 16, 2010 | 2004 Pontiac Montana

1 Answer

Car starts sounding like it has fuel starvation spuddering


Sounds like the vent on your gas cap is blocked.
The next time it dies, try opening the gas cap and listen for a sound like air escaping. If you hear this, it should start right back up again.

If I'm right, you just need to replace the fuel cap ($5 at any gas station or auto parts store) and you'll be good as new.

Sep 09, 2009 | 1993 Mercedes-Benz 190

1 Answer

Tank is full but guage says emty


THIS PROBLEM IS CAUSED BY A DEFECTIVE GAS GUAGE SENDING UNIT, U WILL NEED TO PULL THE FUEL TANK AND REPLACE IT.

Feb 11, 2009 | 2004 Chevrolet TrailBlazer

1 Answer

Fuel gadge reading


You are going top have to pull the gas tank and change the gas guage sending unit, it is the cause of your erratic guage readings, of this I am 100% sure.

Oct 11, 2008 | 1997 Chevrolet S-10 Pickup

Not finding what you are looking for?
2000 Chevrolet S-10 Logo

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...