Question about 2002 Ford Explorer
2002 FORD FOCUS ZETEC, 1.4 wHERE IS FUSE BOX
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Most cars only have 2-3 Fuse boxes. And generally the locations are as follows:
Under the driver side dash, on the left side behind or even above the kick panel.
Open the driver side door, there may or may not be a tiny removable panel, fuse box may be behind there.
Same on Passenger side.
Behind the glovebox, useually the glovebox is pulled down further by finding a plastic or rubber tab that limits the glovebox's movement, and depressing the tab until ample clearance is made.
Under the hood, usually this is for engine-specific functions. (1-2) fuse boxes here.
But I found this by googling your question.
found on WikiAnswers.com
There are 2 fuse boxes one behind the glove box and one under the hood, a little black box on the right hand side of the engine as you are facing it. Fuse 47, a 15amp fuse is for the cigarette lighter..it's located behind the glove box which you can drop down for easy access. The "glove box" mentioned is the little utility box on the left side near the door.....Not the big main "glove box" on the right hand side.
Posted on Oct 22, 2008
go to www.motorcraftservice.com then click on the owner guide and put in your truck information
then choose the 1st owner manual printing and should be between page # 184 to 200.
Good luck and I hope this will awnser your question.
Posted on Nov 08, 2008
SOURCE: Focus timing belt replacement.
This is a very very easy timing belt setup. first off you have to remove the valve cover. Then you have to remove the serp belt. Then remove anything thats in your way of the front cover. after you remove the crank pulley re-install the crank bolt. DO NOT LOSEN THE BOLT FOR THE TENSIONER!!!! now spin the crankshaft until the sproket aligns with the timing mark. now at this point the two camshafts should be aligned. now there is a special tool from ford that holds the cam shafts in place. all it is is a 1/4" peice of metal that goes on the left side of the cam shafts to hold them into place. if you mark the cams you wont need the tool. or if you can find something to fit in the left side of the cams that will work too. anyways after that its just the same steps in reverse. very easy to do.
Posted on Aug 31, 2009
common problem, replace the blower motor (fan) resistor, this is what controls the fan speed,its located on heaterbox next to blower motor.heres a picture of it,its on the rightside of dash toward the bottom. hope this helps.
Posted on Feb 19, 2010
Tips for a great answer:
Feb 27, 2016 | Ford Cars & Trucks
Mar 25, 2011 | Ford Focus Cars & Trucks
Jan 14, 2011 | 2006 Ford Focus
Feb 19, 2010 | 2000 Ford Focus
Oct 23, 2009 | 2009 Ford Focus
Sep 25, 2008 | 2001 Ford Focus
Jul 09, 2008 | 2000 Ford Focus
222 people viewed this question
Usually answered in minutes!