Question about 2004 Suzuki Forenza

2 Answers

I Need step by step instructions for replacing the camshaft position sesor on a 2005 suzuki forenza

Posted by on

  • Anonymous Dec 12, 2008

    i just got the sensor today and wanted to to it myself but the auto store does not carry a manual you have to order some kind cd. I just need to see were the switch goes in order to do this.



    -mel

  • yadayada
    yadayada May 11, 2010

    I think it in the back of the cylinder head area, look and let me know, could not find exact info for you.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

I just replaced one on my 04 forenza. Not a bad job really. If you can look in the archives on this website because I posted step by step instructions for doing this job. Beware of after market sparkplug wires, Many cheapo brand wires interfere with the cam position sensor. While you are doing the job you may as well replace the belt and air filter because both must be removed. You will also need a set of reverse torque sockets.If you can't find  my write up do another post and I will respond.

Posted on Jan 30, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 232 Answers

THE EASIEST WAY IS TO GO TO YOUR LOCAL AUTO RETAILER AND BUY THE REPAIR MANUAL FOR THAT VEHICLE. PAY A BODYSHOP FOR THE INSTRUCTION

Posted on Aug 04, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Trouble code P0340 2006 Suzuki Forenza


It`s coming up the Camshaft position sensor.

Apr 21, 2014 | 2006 Suzuki Forenza

1 Answer

Remove dashboard 2005 suzuki forenza


the answer , as always for all cars. is this
read the FSM.
or go to alldata.com and read.

easy huh, covers ever step.
and varies by year, model and trim levels and options......
here is the $4 day pass
https://suzukipitstopplus.com/Products/1027-2004-forenza-service-manual.aspx

old post but others search and find this

Jan 16, 2014 | 2004 Suzuki Forenza

1 Answer

I replaced the timing belt on a 05 suzuki forenza and not i cannot figure out which mark to use on the exhaust cam pulley


  • Hear are the timing marks fora a 2005 Suzuki Forenza 2.0

  • Crankshaft gear to the bottom of the rear timing belt cover ----


ironfist109_352.jpg


  • Camshaft gear to Camshaft cover ---

ironfist109_353.jpg


  • If you have any comments please feel free to leave them here.
  • Hope this helps and thank you for using FixYa.


Regards, Tony

Oct 10, 2011 | 2005 Suzuki Forenza

1 Answer

Cant find camshaft position sensor on 2005 suzuki forenza. do i need to remove a/c pump and p/s pump?


The Crankshaft position sensor is right behind the AC compressor. Yes you do have to remove the PS pump and compressor to have max access to the sensor. You can follow the connector cable down to the sensor. These type sensors are normally pretty sturdy and the problem more times than not is in the wiring or connectors.

Mar 10, 2011 | 2005 Suzuki Forenza

1 Answer

2005 Suzuki Forenza S Oxygen Sensor replacement


You will need to splice in the universal ones.

Jul 30, 2010 | 2005 Suzuki Forenza

1 Answer

2005 Suzuki Forenza Wiper Washer Inop.


first and foremost, check that all your fuses are good. If they are, your next step would be to pull the winshield washer motor out and test it by applying 12 volts from the battery directly to the motor to see if it turns on. if it works then your problem is in the wiring, check that you are getting power to the harness when you turn it on. Now, if the motor does not work while applying battery power, then you need a new washer motor.

Jul 30, 2010 | 2005 Suzuki Forenza

1 Answer

Check engine light on trying to find the location of the camshaft position sensor on a suzuki forenza 2005


Well, you know where the camshaft is..right? then look in that area for a sensor.

Feb 06, 2010 | 2005 Suzuki Forenza

Not finding what you are looking for?
2004 Suzuki Forenza Logo

419 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...