Question about 1994 Toyota Camry

3 Answers

1994 Toyota Camry window regulator

The window stopped rolling up or down. Took the door panel off and have removed the regulator. Having problems threading the pulley and such. Is there a trick to get slack to do so?

Posted by on

  • gwc22 Aug 25, 2008

    I am having the same problem with my 1992 Camry, how is the best way to thread the pulley?



3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Director Badge:

    Uploaded 100 video answers.

  • Expert
  • 159 Answers

This video will show you how to take the old one out and how to put the new one in.">

Posted on Jan 26, 2011

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

My passanger side window stoped going up or down past a certain point..The motor seems to continue to run for a littl bit but window will not go up past a certain point...?

Posted on Mar 22, 2009


Buy the whole part with the pulley should come with the motor...unscrew the 4 nuts...'n screw the new 1 in

Posted on Aug 27, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

1994 3 litre Camry automatic. Drivers window moving but not opening.

Bets, if the window motor is working then the problem is most likely your window regulator. One can generally find this part at most local salvage yards (Pick n Pull RULES) my daughter just had this problem it was a $17 and about an hour job - removing door panels was the worst part but doable in an afternoon good luck

Nov 08, 2016 | 1994 Toyota Camry

1 Answer

How to roll down 97 Camry driver side window with bad motor?

normally you want the window up to access the motor and regulator but you can remove the window motor and try with a pair of pliers turning the gear manually

Jul 18, 2012 | 1997 Toyota Camry

1 Answer


Hi there,

If manual window winder

Your driver's window glass may have come off the regulator mechanism.

If electric window control

The glass may have detached from the regulator or the regulator cable has unwound itself off the mechanism (ie tension during upward motion, but loose when motor stops winding).

Your driver's door panel will need to be removed to inspect your window regulator operation.

Jun 07, 2011 | 2006 Toyota Sequoia

1 Answer

How do I reset the front driver window mechanism. It closes all theway up but then it rolls down half way on automatic.

its the regulator inside door it has to be adjusted by takeing inside door panel off

Dec 11, 2010 | 2004 Toyota Camry

2 Answers

Driver's side window won't roll up. When I press the button down up there is no noise. Every other window still works. Is this a fuse problem? if so where is the fuse box located on a 1994 toyota camry

I had the same problem with My Camry, the problem is, it could be in the master control for that window, or the one at the door itself,, the motors rarely go bad in Toyota's thank god,, I went to the junk yard and got 3 of the switches and was able to plug them in one at a time and found mine was at the master control so I replaced that switch

Aug 02, 2010 | 1994 Toyota Camry

1 Answer

1994 Camry: 1998 Toyota camry power window fell in door...

your problem is damage window regulator, you can change it by removing the trimboard first to give way in removing the old window regulator assembly.

May 06, 2010 | 1994 Toyota Camry

1 Answer

2000 Toyota Camry Window Problem

Sorry to strike your hopes on this one, but it is not a fuse problem. If there was a blown fuse, the window motor would not get any voltage at all and would neither roll up nor down.

Now, the good news is that you can order an after-market window motor and regulator for a very reasonable price, for example just $44.95 delivered from for your 2000 Camry. If you are just moderately handy, you can remove the interior door panel and replace the part yourself. Or, you can take it to an auto glass shop and they will replace it for you. The charge should be about one hour's labor.

Mar 21, 2010 | 2000 Toyota Camry

1 Answer

Driver side window wont roll up??? 1994 Toyota Camry

that model camry has a window regulator that is cable driven. it is very common for that cable to snap and not allow the window to close. it will likely need a window motor/regulator assembly.

Nov 24, 2009 | 1994 Toyota Camry

1 Answer

Installing power window on 1993 toyota camry

Take the door panel off. Disconnect the window and tape it up. Remove the regulator out off the door cavity.

Jun 06, 2009 | 1993 Toyota Camry V6

Not finding what you are looking for?
1994 Toyota Camry Logo

488 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts


Level 3 Expert

77202 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8755 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides