Question about 1994 Mazda 323

Open Question

Tappet settings for mazda 323 1998 model sedan

Hi , need tappet settings for mazda 323 1998 model sedan.

Posted by on

5 Suggested Answers

fastboyz
  • 674 Answers

SOURCE: tappet settings

mazda 626 had 2 engine a 2.0 and a 6cyl 2.5
1.8 capallo???

Posted on Sep 15, 2008

  • 1 Answer

SOURCE: Valve tappet adjustment

well, I can see ur message has been here for quite some time. Most probably you got the answer to ur request.
I just did the valve clearance on the engine of my SJ413 that has the 1000cc engine of an SJ410 :
When cold: 0.13mm Intake and 0.18mm Exhaust
Engine sounded well and worked fine after that.
Enjoy
Mehdi

Posted on Feb 07, 2009

  • 1 Answer

SOURCE: tappet/valve settings???

o.25mm when hot this is for inlet and outlet

Posted on Feb 11, 2009

  • 1 Answer

SOURCE: can anybody give me the tappet settings for a

hi the inlet 0.1 +/- 0.005 exhast 0.2 +/- 0.05

Posted on Aug 03, 2010

cansmo
  • 2431 Answers

SOURCE: valve clearence settings mazda protege 2003

This is for a non turbo2_24_2012_5_45_49_am.gifNew adjustment shim =Removed shim thickness+ measured valve clearance- STANDARD VALVE CLEARANCE (0.26 mm or 0.010 inch)

Posted on Feb 24, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tappet setting for Chevrolet spark 4cylinder 1litter 2007 model.cylinderhead is not an hydrolic it's tappet need to be set


Check the repair manual for the setting in the specifications table in the engine setting. You can also call the dealership and ask the parts department for the proper setting.

Oct 22, 2015 | Chevrolet Cars & Trucks

1 Answer

What is the tappet settings on a 1200 toyota corolla 1980 model bakkie


It will be the same as for the 1200 on any other Toyota, i.e. Pulsar etc. If you have 10 thou on the intake and 13 thou on the exhaust set while hot, you are withing range.
We used to say a ticking tappet is a happy tappet, so don't try to eliminate all noise from the tappets, just set them so they don't kill all conversation in the cab.

Apr 03, 2015 | 1980 Toyota Corolla

1 Answer

Tappet settings for Mazdz 2.5 turbo diesel 2002 model


I have a Toyota Yaris 2004 plate. The cold light stays,the fan kicks in and stays on, but the cold light does not go off. Help please. regards M Barrett

Dec 25, 2014 | Mazda Cars & Trucks

1 Answer

Tappet Settings for Mazda 2.5 diesel turbo 2002 model


if it doesn't have hydraulic tappets it is .012" inlet hot and .014" exhaust hot

Dec 25, 2014 | Mazda Cars & Trucks

1 Answer

I need the tappet settings for a peugeot 207


inlet valves are set at 0.20mm, exhaust valves are set at 0.40mm, adjust them with the engine cold.

Nov 28, 2013 | Peugeot Cars & Trucks

1 Answer

Tappet Settings for Mazda Drifter 2.5 Turbo diesel


  • Tappet clearence for Mazda 2.5 diesel turbo 2002 model

Aug 10, 2013 | Cars & Trucks

1 Answer

Valve clearence settings mazda protege 2003


This is for a non turbo2_24_2012_5_45_49_am.gifNew adjustment shim =Removed shim thickness+ measured valve clearance- STANDARD VALVE CLEARANCE (0.26 mm or 0.010 inch)

Feb 24, 2012 | Mazda Protege Cars & Trucks

1 Answer

I have a 1999 mercury tracer that has 184,000 miles. I'm the third owner....just recently purchased the car for my teen and now I'm being told that it needs a valve lifter. I'm curious as to wonder how...


good for the most part, it got to 184,000 miles didn't it.
WHy do you think it needs a lifter? IS it nosiy?

This is not a big job. Shouldn't cost over $200.

SECTION 303-01A: Engine — 2.0L SPI 1999 Escort/Tracer Workshop Manual
IN-VEHICLE REPAIR Valve Tappet Removal
sxf~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: If removing more than one valve tappet, mark the components removed for proper location.
  1. Remove the valve cover (6582); refer to Valve Cover .
  1. Remove the rocker arm (6564).
  1. Remove the valve tappet(s).
    1. Remove the valve tappet guide plate retainer(s).
    1. Remove the valve tappet guide plate(s)
    1. Remove the valve tappet(s).
Installation
  1. NOTE: Lubricate the valve tappet(s) with Super Premium 5W30 SAE Motor Oil XO-5W30-QSP or equivalent meeting Ford specification WSS-M2C153-G before installing.
    NOTE: Always return the valve tappet (6500) to their original bores unless they are being replaced.
    NOTE: The oil feed hole in the valve tappets must face away from the oil feed hole in the cylinder head (6049).
    NOTE: Be certain the valve tappet guide plate retainer tabs are toward the rear of the cylinder head , and the valve tappet guide plate tabs are toward the front of the cylinder head.
    To install, reverse the removal procedure.
1d27007.gif

Apr 22, 2009 | Mercury Tracer Cars & Trucks

1 Answer

Tappet settings


mazda 626 had 2 engine a 2.0 and a 6cyl 2.5
1.8 capallo???

Sep 15, 2008 | 1996 Mazda 626

Not finding what you are looking for?
1994 Mazda 323 Logo

Related Topics:

202 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

64286 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...