Question about 2001 Dodge Durango

2 Answers

I have a 98 durango the fan only works on the 3 low speeds not the highest speed. It's like that for a/c and heating.

Posted by Anonymous on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 4,977 Answers

.it could be the resister block for the fan only on the high speed resister side.you would have to remove the resister to inspect it for damage(broken resister wire)this would be the thickest wire on the resister block.it is located in the air box near the blower motor,as it needs the air flow to keep itself cool enough.there is a wire plug that has about 4-5 wires on it.also it could be the fan control switch on the dash that you turn to get the different fan speeds.

Posted on Mar 28, 2011

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I had the same problem with my 2001. I replaced the blower resistor and it works fine. I found a page on the internet that told how to do it. Pretty easy and costs around $45 at the local parts store. My mechanic shop wanted over $200 to fix it. Takes a 1/4 drive socket set, a wire crimper/stripper, and some wire connectors. I also had to replace the plug from the wiring harness which was burnt and probably the cause of the problem. I got one out of a junk yard. If the plug is bad, you might have to replace just that.

Posted on May 27, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HVAC controls overheating


fan motor most likely at fault, low speeds cause extra heat in motor

May 31, 2012 | Mercury Grand Marquis Cars & Trucks

1 Answer

Hi, two things so far, heat/air only comes on if it is at level 5, highest, no low fan speeds at all, also , no lights on radio/and temp control (of outside temp) is it a fixable prob, or are the...


As far as the blower motor fan speeds, the blower motor resistor is the culprit for that, and as far as the LCD display lighting, that is out for good unless you care to replace the very expensive component. But at least you can now have the capability to adjust your fan speeds.
Thank You

Apr 14, 2011 | 1999 Oldsmobile Silhouette

1 Answer

Overheating cadillac


YOU CANT BYPASS THE COOLANT FANS TO OPERATE FULL SPEED.IF YOU TRY YOU ARE GOING TO HAVE HEAD ACHES AND PCM TROUBLES.YOUR THREE COOLANT FAN SPEED IS CONTROL BY THE POWER MODULE IT ASSISTS THE COMPUTER SWITCHING FAN SPEEDS AND CLIMATE CONTROL FUNCTION.CHECK ALL 3 FANS RELAYS ONE OF THEM IS NOT WORKING.IT WILL CAUSE FAN SPEED PROBLEMS.DONT BYPASS OR OVERRIDE FANS.IF SO.YOU ARE GOING TO HAVE PCM AND CLIMATE CONTROL PROBLEMS.IF YOU HAVE ALREADY CHECK 3 FAN RELAYS.THEY ARE GOOD LET THE CADILLAC DEALERSHIP CHECK IT OUT.

Oct 04, 2009 | 2000 Cadillac Seville

1 Answer

2001 Ranger XLT heat and air conditioning only work on high speed


there is a flapor motor that is controled by vacume, check for leaks in the vacume lines on the engine.

Sep 30, 2009 | 2000 Ford Ranger SuperCab

1 Answer

AC comes on in low to medium but shuts off on high.


It could possibly be the switch. Many automotive a/c blowers have a relay to engage the highest fan speed because the high current required will necessitate the use of heavy wiring to and from the blower motor and a heavy duty switch. Check for a high-speed relay and also there might be a circuit breaker in the blower system.

Hope this helps, rhais

Jun 28, 2009 | 2002 Dodge Durango

1 Answer

1999 honda accord ac / heater fan control


Hi! The speed control is defective.The terminal 1&2 could either b worn or burnt out.

Jan 11, 2009 | 1992 Honda Accord

2 Answers

Blower motor only works on high


This is a pretty common complaint and is almost certainly due to a failed heater fan resistor. 
This is a stepped resistor with taps that set the different speeds on your blower and if any part of it goes bad, the whole thing doesn't work any more and the highest speed is the only one that bypasses this part.
These are often mounted on the fire wall but may not be exposed so you really need a service manual (Haynes or Chilton will do) to locate it in your car.

Nov 20, 2008 | 1999 Dodge Durango

3 Answers

AIR CONDITION


replace switch, works 9 times out of 9.

Nov 08, 2008 | 1998 Nissan Frontier

Not finding what you are looking for?
2001 Dodge Durango Logo

161 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...