Question about 2001 Chevrolet Tahoe

Open Question

2001 tahoe abs and brake light come on intermittently and stay on when it warm up

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 2001 Chevy Tahoe with ABS & Brake light on.

I hope you have the problem fixed by now, but, it is the ABS control under the truck. You need to go under the hood and open the fuse box and disconnect the 60 amp fuse for the ABS, this will turn it off before it burns up. This however will also cause the traction assist off light to stay lit all the time. To the fix the problem you can pay tons of money ($700 or so) to have the dealership install a ABS control and the problem will happen again over time. Or, remove it yourself, go on ebay and ship it off to a guy who repairs them for about $150 and you will never have the problem again. Also, if you wrap your cable ends with plastic and protect them good, you can still drive you truck while the part is being worked on. It takes about a week.

Posted on Nov 24, 2008

motor1258
  • 6674 Answers

SOURCE: ABS & Brake light stay on?whats the prob?what needs to be done?£?

Obviously a time for a brake checkover, but if the weather there is snowy & slushy, then perhaps a trip to a carwash & spraying as best as you can behind the wheels, may clean out some debris that may be making one or more of your sensors trip. Not too sure how experienced you are at these type of repairs, as I suspect one or more of your ABS sensors is dirty or faulty, it may be wise to have them checked for safety sake. Be aware that when light is on,ABS may not work, and could allow one or more wheels to lock up when hitting brakes hard in an emergency stop like situation.

Posted on Jan 30, 2009

lesabre1972
  • 474 Answers

SOURCE: tahoe abs and brake light intermittently stay on

When you start to loose your abs sensors(more than one)the brake light will come on.with one sensor going the abs light will come on.I would have your front wheel bearings check seen as how that is were the sensors are.If a weeering sound happens while driving and increases and decreases with with speed I would definatly suspect wheel bearings.

Posted on Mar 29, 2009

Monster80
  • 460 Answers

SOURCE: 2001 chevy s10 blazer abs light stays .

The abs is a add on for the brakes that when the tires come into a skid or slid they wont lock up..Your brakes will still work great with the abs disabled but your brakes will lock up if you push on the brakes hard enough to stop.Mainly abs works in slippery conditions not letting the tires lock up and keep the car rolling instead of making it slide..But no effect of the brakes will happen..Just make sure your fluid is full and there are no leaks and if you want to get them check you can stop by your local Auto Zone and they will scan your car for free and tell you what sensor is bad..I hope this was helpful to you...Have a great night

Posted on Apr 03, 2009

  • 119 Answers

SOURCE: The ABS,Brake Light,Battery light go on and off sporadically while driving.Does this indicate an Alternator failure or a sensor/computer problem?

yes it's most likely a alternator problem,usually the internal diode bridge breaks causing all lights you mentioned to come on,if this happens at a idle open the hood and remove green connector on alt.if lights go out you've found the problem

Posted on Jul 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Abs and brake light stay on in 2001 chevy tahoe


Seems the most likely is the control module, but could be affected by bad grounds or possibly a wheel speed sensor.
Read this thread, about 3 pages long, and has info and links for the control module fix and where to check the grounds.
http://www.tahoeyukonforum.com/threads/abs-light-and-brake-light-01-tahoe.39226/

Apr 27, 2017 | Cars & Trucks

1 Answer

Abslight stays on. How to fix? This is a2007trailblazer?


First you need to have EBCM - electronic brake control module check for DTC'S - diagnostic trouble code's . If the light is on there is a code stored . I think most part stores can do this and for free . After you find out what code is stored , looking up that code in service repair information for diagnostic trouble shooting chart would be next step . There are a few codes too.
DTC C0035 or C0040
DTC C0045 or C0050
DTC C0110
DTC C0131
DTC C0161
DTC C0186
DTC C0196
DTC C0201
DTC C0240
DTC C0241 or P0856
DTC C0244 or P1689
DTC C0245
DTC C0283
DTC C0287
DTC C0290 or C0292
DTC C0455
DTC C0550
DTC C0558

Find the code do the diagnostic's , fix the problem , wiring issue's , a sensor , bad module ,what ever it is . The light will go out then . Here is a sample of code discription .
• DTC C0035 Left Front Wheel Speed Sensor Circuit
• DTC C0040 Right Front Wheel Speed Sensor Circuit

Dec 30, 2016 | 2007 Chevrolet Trailblazer

2 Answers

2002 Tahoe abs relay location


images for 2002 Tahoe abs relay location

Chevy ABS and Brake Dash Light fix - YouTube

? 24:15
https://www.youtube.com/watch?v=Jo76ylqgUR8
Dec 22, 2012 - Uploaded by Skizzot7
This is how to fix intermittent ABS and Brake dash lights on all Chevrolet ... That board is rather robust and is installed external to the vehicle in a location that sits .... I took the module out of a2002 Sierra and it is engineered with no T10 .... ABS Sensor and Harness 2000-06 Chevy Suburban Tahoe GMC ...

How I fixed a Chevy with an Abs and Brake light on - YouTube

images for 2002 tahoe wiring



Dec 09, 2015 | Cars & Trucks

1 Answer

Why does my abs makes a noise when engine is off


Your ebcm internal relay is likely failed, possibly has a c0265 code in ebcm. Pull the abs maxi-fuse underhood fuseblock, abs and red brake light will come on, but noise should stop. There are several module rebuilders online (module masters comes to mind)

Apr 02, 2015 | 2001 Chevrolet Tahoe

2 Answers

Why does my brake light and the a b s light comes on when this vehicle has brand new calipers and pads on


Because the problem is not with pads and/or calipers. If the lights come on only when you brake, you may have a light bulb out. If they come on when you start the car and they stay on, you have a problem with your ABS system (anti-lock braking system). The systems self-check when you start the car, so the light should come on and then go out. If it comes on and stays on, the ABS system has failed. You need to have the vehicle serviced to repair the ABS system.

May 14, 2014 | 2001 Chevrolet Tahoe

2 Answers

Changed rear pads. Brake indicator on dash is still blinking and chiming. How do you reset


Is it the "brake"repair light blinking & chiming?? Or is it the "ABS" brake light blinking/chiming. Brake light should be red, ABS amber

Sep 05, 2011 | 2001 Chevrolet Tahoe

2 Answers

2001 GMC Jimmy. Is there a fuse I can take out to disable the ABS system and just use the regular braking system so I can drive it into town and get it checked out and fixed properly? The ABS system is...


Under the hood there should be a fuse box, it's going to be one of the big fuses, had the same problem, 01 Tahoe. Found out it was a front bearing assembly. I replaced and it works fine now. Be carful as you will have no abs once fuse is pulled and FYI the abs light and break light will stay on as well. Good luck

Apr 05, 2011 | 2001 GMC Jimmy

1 Answer

Tahoe abs and brake light intermittently stay on


When you start to loose your abs sensors(more than one)the brake light will come on.with one sensor going the abs light will come on.I would have your front wheel bearings check seen as how that is were the sensors are.If a weeering sound happens while driving and increases and decreases with with speed I would definatly suspect wheel bearings.

Mar 29, 2009 | 2001 Chevrolet Tahoe

4 Answers

2001 Chevy Tahoe with ABS & Brake light on.


I hope you have the problem fixed by now, but, it is the ABS control under the truck. You need to go under the hood and open the fuse box and disconnect the 60 amp fuse for the ABS, this will turn it off before it burns up. This however will also cause the traction assist off light to stay lit all the time. To the fix the problem you can pay tons of money ($700 or so) to have the dealership install a ABS control and the problem will happen again over time. Or, remove it yourself, go on ebay and ship it off to a guy who repairs them for about $150 and you will never have the problem again. Also, if you wrap your cable ends with plastic and protect them good, you can still drive you truck while the part is being worked on. It takes about a week.

Nov 12, 2008 | 2001 Chevrolet Tahoe

Not finding what you are looking for?
2001 Chevrolet Tahoe Logo

Related Topics:

295 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...