Question about Pontiac Grand Am

Open Question

What do codes P0101, and P0130 mean for a 2003 pontiac grand am v6, also i got stuck slipping on ice and when trying to get going agin noticed the car was sputtering/bogging out, it goe through coolant like nothing and there is no leak, the cigarette wont work, and now the ground effect on the left side appears to be fallin off slowly. where to begin? Also, just replaced head gaskets on aa 2001 grand am 3.1L now it barely turns over, where do i start here?

Posted by on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: car wont start

turn key to ON position wait 10 min untill security light stops flashing and dissapears then hit unlock 3 times then start

Posted on Aug 24, 2008

salsaurbana
  • 56 Answers

SOURCE: 1999 Pontiac Grand Am Overheating

It is probably the problem. To make shure that need to change the gaskets, one of the symptoms use to be thet the temp rises when you are running at speed 50+ average, where is supposed that the car gets a lot of air due by the speed and nobody thinks that will be overheated.

Posted on Nov 19, 2008

  • 1 Answer

SOURCE: Coolant leak in my 2000 Ford Taurus

I don't have the same coolant system that Ford has listed, my is different for my 2000 Ford Taurus SE 6cyl 3.0L. Where can we find the right part. I want to the junk yard 3 years ago and find one but the problem with that one is the top keep popping off. I have replaced the top three times and I am pissed because I love my car but I keep having to spend money on this system. H.E.L.P!!

Posted on Mar 01, 2010

samtoler
  • 666 Answers

SOURCE: what would cause 01 ram 2500 v8 to sputter and

cateletic convertor, And a bad timming chain

Posted on Jun 13, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Pontiac grand am I had a diagnostic reading at autozone for diagnostic codes po128,po440 and p1189 don't know what they mean for a 2003 Pontiac grand am gt 3.4 liter and v6 engine vehical


PO128 -- engine coolant low or thermostat not working
P0440 - EVAP system malfunction, gas cap loose - Cat convertors missing from car can cause this
P1189 - Engine Oil Pressure Switch Circuit -- CAT CONVERTORS MISSING FROM CAR can cause this.

Jan 28, 2015 | 2003 Pontiac Grand Am

1 Answer

What is codes po128 ,po440 and p1189 for a 2003 ponyiac grand am gt 3.4 liter and v6 engune?


Oil pressure switch issue
Coolant temperature sensor issue
EVAP system issue
All different issues, so I suggest seeing a mechanic.

Jan 28, 2015 | 2003 Pontiac Grand Am

1 Answer

HOW TO REPAIR A P0650


Hi I'm having the exact same problem.. I have replaced the MAF, the crank sensor, the MAP sensor everything in my 2001 Grand Prix 3800 has been replaced! I was wondering if you had fixed yours? And I also own another 2000 Grand Prix and took the brand new MAF out of that and it still was still dying. I had to clear the codes to restart. Please help

Feb 28, 2013 | 2003 Pontiac Grand Prix

1 Answer

Code p0068 & p0101


both codes are for maf sensor is it plugged in

Dec 07, 2012 | 2006 Pontiac Grand Prix

1 Answer

My check engine light is on, and the code is P0420, it's a Pontiac Grand Am. What does the code mean?


Go to Advance Auto. They have free troubleshooting of engine codes. The techs there can give you a list of causes for the code based on your automobile.

Dec 23, 2011 | 2003 Pontiac Grand Am

3 Answers

Troble code P0170


Trouble Code: P0170 (3.4L V6 VIN V Auto)
Fuel System Too Rich or Too Lean (Bank 1) Print this code dataprint_icon_codes.gif Number of Trips to Set Code: 2
OBD II Monitor Type: CCM Details
Indicators: MIL Details
Trouble Code Conditions:
DTC P0100, P0101, P0110, P0115, P0120, P0121, P0130, P0133, P0136, P0135, P0136, P0141, P0153, P0155, P0201-206, P0300, P0301-P0306, P0401, P0402 and P0441 not set, engine running in closed loop at a stable engine speed, and the PCM detected the lean or rich fuel trim correction value was more than or less than a calibrated limit in memory.

Possible Causes:
  • Air leaks present in the exhaust manifold or exhaust pipes
  • Air being drawn in from leaks in engine gaskets or other seals
  • Base engine "mechanical" fault affecting one or more cylinders
  • Fuel control sensor is out of calibration (i.e., ECT, IAT or MAF)
  • Fuel delivery system supplying too much or too little fuel at idle or cruise (e.g., faulty fuel pump or dirty, restricted fuel filter)
  • One or more fuel injectors is dirty, leaking or stuck open/closed
  • HO2S element is contaminated, damaged or it has failed

Oct 11, 2009 | 1995 Toyota Tacoma

1 Answer

Heat not working and service engine light on


Many times no heat is the result of low coolant which means there isn't enough to properly flow through the heat core. Check the coolant level. If you're running hot it could also be from low coolant. If the coolant level is normal you may very well have a stuck thermostat. If you do have low coolant the next step is to find the reason why it's low.

Did you pull the codes yet?

Oct 05, 2009 | 2003 Pontiac Grand Am

2 Answers

Oxygen Sensors out on Pontiac Grand Am 2003 V6


Your car is equipped with a diagnostic system called OBD II. You can purchase a code reader and use it to find which O2 sensor is causing the problem. You probably have 4 sensors. 2 in front of the converter and 2 behind. The code reader will indicate something like "SEN 1 BANK 1." This means O2 sensor in front of the cat. on the side of the engine that contains cylinder 1. You may see "SEN 2 BANK 1" "SEN 1 BANCK 2" "SEN 2 BANK 2" Bank 2 indicates oppisite side of No.1 cylinder. Hope this helps

Apr 25, 2009 | 2003 Pontiac Grand Am

2 Answers

Grandprix 2003 code P1811 long shifting or hesitating when accelerating


Have a Code P1811 on my 2002 Pontiac Grand Prix. The only thing I have noticed is it gets warm very fast. Haven't noticed any slippage with the tranny...What do I do??

Nov 08, 2008 | 2003 Pontiac Grand Prix

2 Answers

2004 pontiac grand am diagnostic code P0130


it is an 02 sensor code seeing values off from normal perimeters

Aug 20, 2008 | 2004 Pontiac Grand Am

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...