Question about 2004 Buick LeSabre
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
It should be going to your valve cover.
NOTE: On VIN K applications, the Manifold Absolute Pressure (MAP) sensor is mounted to the Positive Crankcase Ventilation (PCV) Valve cover
Please don't forget to rate!!!
Posted on May 21, 2009
SOURCE: PVC Valve
Its on the valve cover ,before i go further the valve cover is the thing where you pour the oil into,its on the oposite valve cover of the oil fill its round it will have a black hose connected to it just wiggle it while you pull it out,shake the pcv up and down if you hear like a ball inside moving up and down its good
Posted on Jul 13, 2008
Open hood, top left side between the valve covers. There is a "funky" plastic housing that turns counter-clockwise (less than 1 inch of travel). then pull straight up to reveal the "missing" pcv valve.
Posted on Mar 05, 2009
The pcv valve is located under the map sensor in a plastic housing. If you stand on the passenger side of the vehicle and look under the hood, the map sensor is the sensor right in front of you. It should have three wires going to it. If you look closely, the sensor is clipped into a type of cap. If you grab the cap the sensor is clipped into and twist it counterclockwise, it should come off and the pcv valve will be inside. You may need new o-rings to prevent oil consumption. You may also need a needle-nose pliers to remove the sensor from the upper intake manifold.
Posted on Oct 30, 2009
Tips for a great answer:
Jun 16, 2010 | 1990 Buick Century
Oct 30, 2009 | 2000 Buick LeSabre
Oct 13, 2009 | 2000 Buick LeSabre
Jun 15, 2009 | 2001 Buick LeSabre
May 21, 2009 | 1999 Buick LeSabre
Jan 08, 2009 | 2001 Buick LeSabre
Jul 13, 2008 | 1994 Buick LeSabre
142 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: