Question about 1991 Audi 80

2 Answers

When i turn my high beam lights on the passenger side high beam does not come on. the fuse also blows.

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 743 Answers

Check the bulb first, then start with the connecter at the bulb then start looking for a bad ground or short. You can give the bulb a temporary ground to see if that helps, but make sure you plug it into the ground side which in most cases are the black wire, but check the wiring diagram at the parts store first since you will need it to diagnos this problem anyway.

Posted on Mar 28, 2011

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 80 Answers

There are short circuit somewhere ,check that no wire touch car body in the switch.

Posted on Mar 28, 2011

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

  • 5 Answers

SOURCE: 2000 Nissan Maximum. Passenger side low beam only does not work

CHANGE BUILB ANY WAY

Posted on Sep 19, 2009

carlsbiz
  • 1124 Answers

SOURCE: low beam does not work on passenger side only

It could be a realy..
Find the relay location in your manual..

Have a great day !

Posted on Sep 19, 2009

gladys_neal
  • 334 Answers

SOURCE: fog lights and high beams work, but not the low beams

most likely the hi lo switch

Posted on Dec 31, 2009

  • 1 Answer

SOURCE: 98 caviler low beam

98 caviler high beam left side dosent work canged bulb checked fuse and all good

Posted on Feb 15, 2010

noranda21
  • 1547 Answers

SOURCE: The passenger side low beam

have you check the low beam bulb

Posted on Nov 29, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 Toyota Camry driver's side low and high beams are out


If you have a short it is in the power line to the lamp unit. From the relay.

Apr 10, 2013 | 2003 Toyota Camry

1 Answer

1998 Lincoln Town Car passenger side headlight low beam only.


Hi Steven, I guess you have checked the fuses? Some time (and I'n not saying this is your problem) the fuses are wired in such a way that if one blows (and the fuse is on the earth side of the circuit) there will be an output, but the circuit will either use the earth through the the other bulb or fail to earth. I would also suggest having a look at the relays and their operation. Lastly, check the earth connections again. Regards John

Sep 22, 2012 | 1998 Lincoln Town Car

3 Answers

I have a 2006 ford escape and the passenger head light low beam will not work. Tried replacing the bulb, and check fuses nothing is working.. what else can I try?


Both your low beam and your high beam is protected by the same fuse, so it makes sense that the fuse is OK if the high beam is working on the passenger side. There are 3 fuses for the headlamps. Fuse #13 in the Battery Junction Box (20 Amp). If this fuse is blown, the headlamp relay will not have any power and neither high nor low beam on either side will work (you will have no headlamps at all) Then there is Fuses #2 and #3 (15 Amp) in the Battery Junction Box. #2 goes to the left low and high beam and #3 goes to the right low and high beam.
The headlamp switch uses a SINGLE CIRCUIT to control BOTH sides at the same time, so if one side works, the switch cannot be the problem. The headlamp relay provides power for fuses #2 and #3 and we already ascertained that these fuses must have power since we have working lights on both sides, so the relay cannot be the problem. A replacement bulb has already been tried, so that pretty much leaves us with a bad lamp socket. (Most likely cause) or a bad connection at splice #S122, which is located in the main wiring harness near the breakout for the left headlamp. (RED/BLACK wire)

May 16, 2011 | 2003 Ford Escape

1 Answer

Hi, I have a 2002 Buick Rendezvous and the high beam light will not come on on the Passenger's side headlight. The low beam works great and the high and low beams work great on the driver's side. We have...


Make sure the high beam realay under the hood fuse box is working. You can swap the hi beam relay with the horn relay to test. The hi beam filiament in the bulb can be open too.

Mar 24, 2017 | 2002 Buick Rendezvous

1 Answer

If a bulb is out will it make 15A on #2 keeps on blowing out. Changed the relay, hi/lo beam switch. Low beams still won't work. Can't keep a fuse in it cause it blows out. This is for a 2000 Sonata 4 cyl....


the only thing that causes a fuse to blow is a short. I would say a wire is pinched somewhere, the question is how to isolate and fix. I guess have a handful of fuses, since you say it is the low beams I would disconnect one light and see if it blows the fuse. I am thinking that the most excellent place to start is where the battery is installed. As a wire may have been nicked or crimped, for the low beam on the passengers side. Hope this helped

Sep 23, 2010 | 2006 Hyundai Sonata

1 Answer

Passenger headlights only do not operate.


check the bulbs first and also the fuses theres a fuse for each side and for low and high beams, start there, good luck.

Feb 19, 2010 | 2002 Mitsubishi Eclipse Spyder

1 Answer

My headlights don't work they only work on high beams an when the truck is running an my lights are turned off not sure if it might be a fuse or do i need to replace my headlights because they work just...


I got news lightbulbs for my driver side headlight and it only works when it is on high beams, passenger side works on both low beam and high beam. What could it be? Would it cost a lot to get fixed?

Jul 26, 2008 | 1999 Chevrolet Malibu

Not finding what you are looking for?
1991 Audi 80 Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

yadayada
yadayada

Level 3 Expert

76848 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14384 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...