Question about Ford ZX2

1 Answer

On 99 ford zx2 why is my clutch sticking to floor when i shift gears?usually only when im backing out of a parking space and have to shift gears quickly,then i stall out.once im going its fine.i just had my clutch replaced a year ago

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 8,589 Answers

Hi, you probably have air in the hydraulic line. Check the clutch hydraulic reservoir (next to the brake reservoir)--is it empty? If yes, refill and look for a leak. Repair the leak and bleed the system to restore pedal pressure. If you need instruction for replacing components or bleeding, please let me know.

Posted on Mar 28, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to adjust the clutch on a 1999 Ford escort ZX2


The clutch is not adjustable it is fully hydraulic. That means it is self adjusting, if the clutch pedal engages high on the pedal and the clutch is hard to push you need a new clutch plate and pressure plate.

Mar 18, 2017 | 1999 Ford Escort

1 Answer

1997 jeep wrangler stays in gear


97 wrangler

what does that mean, it has no clear meaning at all.
first is car a auto or stick (mines a stick)
stays in gear can mean many things,,,
1: A/t shift lever stuck in drive, you never said what gear,?
2: M/t sticks shift car, , the car moves in gear, with clutch held to floor.

i cant shift to neutral?
I cant shift to park.
I cant what? be clear. please

Jul 01, 2016 | Jeep Cars & Trucks

1 Answer

2000 ford zx2 shift for issues


Can you verify that when you push the clutch pedal to the floor the slave cylinder is moving the pin that goes between the slave cylinder and the clutch fork. It sounds like the clutch is not releasing properly.

Apr 07, 2017 | Ford ZX2 Cars & Trucks

1 Answer

How do u unlock your steering wheel and ingnition for a 99 sunfire gt


Place ing key in ingtion make sure u r in park or clutch if a stick shift is pushed all the way to the floor, then grab stering wheel tight turn wheel to left and hold while turning ing key, or try turning wheel to right while trying ing key, steering wheel can lock with pressure causing ing key to be non turnable same with transmision, park or clutch to the floor. Hope this helps

Mar 05, 2012 | 1999 Pontiac Sunfire

2 Answers

Clutch pedal sticks to the floor; the brake reservoir was low


I believe your pressure plate is broken and at a minimum will have to be replaced along with the clutch disk.

Jul 04, 2010 | 2006 Ford Fusion

1 Answer

The stick shift in my car is very tight and hard to put in any gear. any ideas?


clutch cable loose or needs a clutch. also check the fluid some standard transmissions have a plug on the side to fill them.

Oct 22, 2009 | 2001 Ford Escort ZX2

1 Answer

Are shift settings supposed to light up? Is it a


Yes, they are supposed to light up. I believe that's on the same fuse as the instrument cluster, so if that lights up don't worry about the fuse. It's probably just a burnt out bulb. To replace, remove the knob - 2 screws, one in the front one on the rh side lift up, use thread lock to install, remove the floor console - seats forward remove one screw each side in the back, pull up to remove the parking brake console, seats rearward remove 2 screws from shift console, 2 pushpins each side, remove cupholders, lift and remove console. four screws to remove dial bezel then you'll see the connector for the lamp (the parking brake handle and gear selector will have to be moved to different positions to move console)

Aug 17, 2009 | 2001 Ford Escort ZX2

3 Answers

Stuck in 5th gear


try bleeding your clutch

Aug 19, 2008 | 1991 Ford Ranger Supercab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

204 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...