Question about Mitsubishi Lancer

1 Answer

Need repair instructions for heat-air control switch for a 2004 mitsubishi lancer

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 176 Answers

First start by pulling the knobs off. Then you need to use a slim flat tool, maybe a butter knife or very slim screw driver to pop the trim piece off. It is held on by 6 clips, you just need to pry it off slowly to prevent cracking. Once the trim piece is off, you can then see two screws holding the unit in. Back out the screws and you should be able to pull the control head out. If you are just trying to pull the switch off, then leave the cables attached and you can pull the switch out from the back side of the heater control head.
I hope this helps, and please let me know if I can further assist you.

Posted on Mar 28, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to manually change my heater over to air condition. 2004 Lancer LS


There should be a blend door behind the dash that directs air thru the heater core and evaporator core.
Look at Youtube for "lancer blend door" for a video on the repair.

Jul 29, 2012 | 2004 Mitsubishi Lancer

1 Answer

My 2004 Mitsubishi Lancer will not start. I think it might be the clutch pedal switch but I am not sure. I took it off and tested it with my ohm meter with it having no resistance while disengaged and...


Use your meter to check for power at the clutch switch when the key is turned to start. If no power, the ignition switch or wire from the switch is bad. If the is power, the starter solenoid is bad.

0996b43f80253eee-00z4oajvorpdkmypuikqertb-2-0.gif
Do It Yourself Diagnosis and Repair

Nov 11, 2017 | 2004 Mitsubishi Lancer

1 Answer

A/C unit blowing hot air when selected to cool on


Your A/C unit is low on Freon, or you have a bad pressure switch. Turn on the Air Conditioner, with the engine running, & put it on Max. Open the hood, & see if the compressor is spinning. If it is not, then you need gas. You can buy refill kits at a local Walmart. If you have a leak, it may be a wasted $30. That is what I paid for a 22 oz. can of R-134A Freon. I had a dealer regas mine & put in a dye that they can find leaks with a black light. It may be cheaper in the long run. My drier, in front of the radiator has a leak. It will cost $460. to replace it.

Jul 11, 2010 | 2004 Mitsubishi Lancer

1 Answer

2004 Mitsubishi lancer es stop light switch


the brake lighr switch located : the top of the brake pedal.

May 04, 2010 | 2004 Mitsubishi Lancer

3 Answers

I have no heat in my 2003 Mitsubishi Lancer. When


The cable that pulls the cool/heat switch on the a/c gets weak and it doesnt allow the dial to switch over to heat. You can see that cable and the way its supposed to work on the right side of the gas pedal over it. I usually just use my foot to push that switch over to heat and reach with and pull on it with my right hand to cool.

Jan 08, 2010 | 2003 Mitsubishi Lancer

2 Answers

Want engine / wiring diagram for Mitsubishi Lancer Ralliart Sport


i need your email so i can send you the images i cannot load them here for some reason

Jan 08, 2009 | 2004 Mitsubishi Lancer

1 Answer

Change timing belt and idle speed servo kit.


send me your e-mail so i can send to you full repair instruction and picture
mutasem2002@hotmail.com

Sep 02, 2008 | 2004 Mitsubishi Lancer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8582 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...