Question about 2001 Dodge Durango

1 Answer

How to remove and replace 3rd brake light and driver's side brake light. need to know what bulbs to purchase

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 33 Answers

The 3rd brake light should have screws holding it in place and for the brake light drivers side pop hatch and there will be screws on the inside hatch holding the brake light in place as for the bulbs any parts store can tell u they have it in there comp.

Posted on Mar 28, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

When light switch is off only 3rd brake light work, when switch is on the back lights are stuck on 3rd light works normal what could be the problem?


Are the brake lights stuck on or are you just seeing the parking lights on without the brake lights lighting up? Sounds like you have no rear brake lights, check your emergency light switch. Sometimes it may not switch completely, turn it on and off a few time and then recheck it.

Mar 08, 2015 | 1998 Ford Explorer

1 Answer

Replacing sedona 3rd brake light bulb replacement


on the inside of the tailgate you'll see the cover for the 3rd brake light using a screw driver pry out on the cover gently and the 2 pins should pop once loose take it off and you'll see the bulbs

Aug 05, 2014 | Kia Sedona Cars & Trucks

1 Answer

1990 Toyota 4 runner How do I replace brake light bulb?


which brake light? if it is in the sides, drop the tailgate/back door and remove the screws holding the tail light assembly in and then it should just pop out. If it is a 3rd brake light, 2 screws hold the cover in and remove those and carefully pry the plastic cover out and gently pull on the bulb

Feb 04, 2011 | 1990 Toyota 4Runner

2 Answers

I need to change the brake light but can't figure out how to get the cover off and it is not in the manual. Do you know how to get to the bulb to change it?


Most 3rd brake light covers are held on with 2 plastic screws located on the sides, or the cover is just a push fit, easily pried off with a thin blade such as a putty knife screw drivers sceatch it up badly

May 31, 2010 | 2005 Nissan Quest

2 Answers

Brake lights are staying on constentily except in park


Also check the light bulbs in the 3rd brake light. If they are out (burned out or removed) the brake lights will remain on. I found this out by trial and error. I replaced the brake switch, tested voltages also and everyone told me that the 3rd brake lights should have nothing to do with it. But the do, don't know how or why, ford dealer wanted to charge me $86 for diagnositcs and $70 for complete 3rd brake assembly. Went to Napa and got bulbs for $5.00 (5 bulbs) and everything works now. Also this causes the cruse control not to work.

Feb 10, 2010 | 2003 Ford Focus

1 Answer

Brake Lights and Reverse Light on driver's side not working


Look for a missing / poor ground connection on the drivers side lamps.

Sep 24, 2009 | 1994 BMW 3 Series

1 Answer

On my 2000 camry the rear warning light came on. I checked the lights and they're working. What could be wrong?


3 things. 1st remove the bulb from the 3rd brake light and see if there is any black in the glass. If so, replace it. If not check your other stop lights bulbs for the same.
2nd. Check the wires on the drivers side trunk hinge to see if any are broken and repair if necessary
3rd. You may have a bad light warning module located in the trunk on the drivers side rear quarter panel behind the covering.

May 14, 2009 | 2000 Toyota Camry

1 Answer

1991 Honda Accord brake light probelm.


Check the prones inside the connector that you plug into the brake light module. You may have to squeeze, wiggle, tilt each one to see which one is not connecting all that good. I know it may sound confusing. I tried to explain the best of I could.

Mar 16, 2009 | 1991 Honda Accord

1 Answer

Brake lights do not work (3rd brakelight does) changed bulbs checked fuse


Problem could be the Brake Light Control Module. That's about the only other thing other than a bad wire somewhere if the bulbs and fuses are good. 91 Accord has 2. One on each side in the smaller of the 2 rear tail light lenses. In order to change the module you have to remove the smaller of the rear tail lights. Drivers side is 5 pin. Passenger side is 6 pin.

Jul 20, 2008 | 1991 Honda Accord

2 Answers

PT Cruiser Brake Light


The bulb in the rear light has burned out and to replace it follow these instructions: 1) go to your owner's manual to find out the part number. You can find and purchase the replacement bulb at Target, any auto parts store and even at Walmart for under $4.00; 2) pop open the trunk door; 3) get a phillips screw driver and unscrew the 2 screws holding the rear brake light fixture to your car body; 4) as soon as you turn over the fixture you'll see where to pull out the burned out bulb and replace it with the new one(s). Good luck!

Jul 14, 2008 | 2006 Chrysler PT Cruiser

Not finding what you are looking for?
2001 Dodge Durango Logo

339 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...