Question about Ford Aerostar

1 Answer

Motor in good when i instal dont work - Aerostar Ford Cars & Trucks

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 176 Answers

It could be many different things. Look over all of the electronic connectors, and everything you re-installed. Make sure it was installed correctly and nothing is broken or missing. This is too general to be able to help you further.

Posted on Mar 28, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to install a motor mount on a chevrolet 2000 impala 3800 series 2 v6


You have more than one engine and transmision mounts on your vehicle
upper mounts easy to install but bottom two is little hard because hard access to bolts good idea to work with lift and make sure your engine secured on level before losen any bolt from mounts !!! If you dont have proper tools good idea to let some one do it for you be safe!

Feb 09, 2012 | 2000 Chevrolet Impala

1 Answer

My heater blower motor wont turn on,i checked all the fuses,they are good,i took the blower motor out and checked it,it works,why wont it come on when installed in the car ?


there is probably no voltage in the system, just because the fuses are ok it dont mean that there is a voltage check for voltages prior to the fuses

Sep 17, 2011 | 2001 Kia Sephia

2 Answers

Windshield wipers sometime works and sometimes dont turn on. and its not a fuse. what do i have to replace to fix this?


REPLACE THE WIPER MOTOR WHEN THEY DONT WORK HIT THE WIPER MOTOR AND THEY SHOULD START WORKING

Oct 15, 2010 | 1998 GMC Jimmy

2 Answers

Front windshild wiper is not working but back ones are. what is my problem?


The fuse could be blown, or the motor could be bad, or the switch may be bad, or the wiring in between.

Oct 12, 2010 | 2001 Ford Windstar

1 Answer

Windshild wipers stop working


CHECK FUSE IF FUSE GOOD.HOOK A JUMPER WIRE TO GROUND AND GROUND WIPER MOTOR.TURN WIPER SWITCH ON IF WIPERS WORKS YOU HAVE TO FIX GROUND CONNECTION. IF WIPER STILL DONT WORK.REMOVE THE COWL COVER.TURN WIPER SWITCH ON TO SEE IF POWER GOING TO WIPER MOTOR IF YES.REMOVE WIPER MOTOR HOTWIRE IT.IF WIPER MOTOR DONT WORK REPLACE IT.IF WIPER MOTOR DO WORK CHECK FOR BINDING OR DAMAGE LINKAGES.IF POWER NOT GOING TO WIPER MOTOR AND FUSE GOOD.WIPER SWITCH FAULTY OR IT HAS BROKEN WIRE FROM SWITCH TO WIPER MOTOR.

Oct 04, 2010 | 2002 Toyota Avalon

1 Answer

Electric windows and tempeture on dash are not working


IF ALL WINDOWS ARE NOT WORKING IT LOOKS LIKE.THE POWER WINDOW CIRCUIT BREAKER IS BLOWN.CHECK THE HEATER AND AC IGNITION FUSE.MAKE SURE POWER IS AT THE SWITCH.IF ALL IS GOOD.CHECK BLOWER MOTOR FUSE AND RELAY.IF THEY ARE GOOD.HOT WIRE BLOWER MOTOR IF IT WORK YOU HAVE A BAD BLOWER MOTOR SWITCH AND RESISTOR.IF BLOWER MOTOR DONT WORK.REPLACE BLOWER MOTOR.

Aug 26, 2009 | 2007 Ford Focus (3 Door) Hatchback

1 Answer

Driver side window will not roll down


here are the steps to test it pull out the owners manual find the fuse for the window insure that it is good if it is good pull off the door panal check the motor with a battery charger then if the motor works it is the switch for that window if it dosent the motors sometimes just freeze up get some spary lubricant spray it in the motor beat the motor up with a hammer dont break it more but dont go easy on it eaither this has worked for me several times

Aug 15, 2009 | 2000 Dodge Grand Caravan

1 Answer

My 1998 eclipse power windows dont work i tested the motors they work i changed the master switch still does not work all of the fuses are good and i changed the relaysand they still dont work


ok the motors work...check to make sure you have 12 volts leading to the switch, also check to make sure that the motors have a ground path... or in some cases a return path for the negative side of the motors, if yes then read on...can you manually crank the windows up or down from the inside?...by taking the motor out..and installing a bolt to make it hand turn-able...or getting a tool like pliers on it to make sure it isn't jammed with corrosion or a broken part?( for the sunroof had to install a bolt and manually crank it with a ratchet wrench make it open and close a couple of dozen times to loosen it up. i bought it after it had been in storage and it seized up...now it works fine on auto yes i lubed it while opening and closing it) if that isnt the case...then you need to test the switch. take the switch out...put a meter on it and check for continuity when the switch is depressed...(should get a short). if the motors,relays,and fuses are good then those are the only ones left. bad grounds are the leading causes for electrical problems with cars due to corrosion.

Mar 12, 2009 | 1997 Mitsubishi Eclipse

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...