Question about 2006 Audi A6

Open Question

My rear side seat belt buckle in my Audi A6 2005 has disappeared through the plastic sheath at the corner of the rear seat. I need to know how to remove the plastic cover. Please help!!!!

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 4 Answers

SOURCE: a6 Battery removal

You should check either - www.audiforums.com www.audiworld.com or www.audizine.com, register and search the forums, should be good info. also check under the battery, man audi cars have secondary brackets underneath to hold the battey in place.

Posted on Jan 06, 2009

  • 37 Answers

SOURCE: audi heated seats

SOUNDS LIKE THE BODY CONTROL MODULE IS NEEDING TO BE RESET

Posted on Apr 06, 2009

  • 1 Answer

SOURCE: how do i change time on clock on 2005 audi a6 quattro s line

I think I can help you. I just did this on mine yesterday because my clock runs a few minutes fast each month. It was somewhere bizarre - sorry I'm not near the car to be more clear. I think I picked Sound, Settings and for some odd reason, it was there, rather than in Car, Settings. NOOO - it was in Tuning - click the AM/FM button, then Settings. I've only had it for a few months, but you'd think I'd have that one figured out due to re-setting it.

-maria

Posted on May 07, 2009

  • 14 Answers

SOURCE: HOW TO REMOVE FRONT SEATS AUDI A6 YEAR 2000

You need to access bolts that are bolted to the floor, disconnect wiring, move the seat forward and look from the rear seat down under, you will see bolts..

Posted on May 13, 2009

nate6556
  • 103 Answers

SOURCE: What type of oil does my 2005 A6 Audi 3.2 Quattro use?

it doesn't matter what brand you use, just make sure you use the motor weight on the cap (don't use Pennzoil)

Posted on Jul 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an audi a3 tdi sport 2003 the seat belt won't pull over enough for it to buckle in to get it fastened any idea on how to fix it


I think the seat belt have a twist and it went into the seat belt housing. Pull the seat belt all the way out hard and un do the twist and let it go back into the seat belt housing. This should fix this problem

Mar 27, 2015 | Audi A3 Cars & Trucks

2 Answers

How do i disconnect seatbelt chime mitsubishi mirage


On many cars, the seat belt sensor is also used to trigger the airbag. Investigate whether this is the case on your car before doing anything drastic to your seat belt alarm.Locate the wire under the driver seat that connects to the buckle with the release button. It should be towards the rear on the right hand side, where you plug the belt into.Follow the wire to an area under the seat where you will be able to fit your hands into.Look for two wires running together. Cut through both of them and slightly separate the ends apart.Use electrical tape to cover the wire ends so they do not short out on each other or metal under the seat.Tuck the wires away from the seat brackets so they do not get tangled if you move your seat.OR>>>>

On the side of the receptacle (where you would slide the buckle into) are two non-tamper torx screws.
Remove the screws using a hollow T10 bit.Carefully remove the plastic side cover. It contains a spring loaded slide switch.Remove the small spring and slide the switch down to its lowermost position.You can double check by watching the seat belt light on the dash go out.Replace the plastic cover and screws.Store the small spring for use in the future. This way the system thinks the buckle is always in so the light and chime won't alert at all.

Jul 22, 2014 | 2014 Mitsubishi Mirage

1 Answer

Broken seat belt buckle


If I had the problem I would look at a junkyard or on line at e-bay for a replacement. You will need to get the buckle and the belt that it is attached to that goes down to the floor down through the crack in the seat.
Remember the buckle receiver is made for the certain belt in the front and rear seats. I have often tried to put the wrong belt in a buckle and it would not fit. ( Example: the right belt goes in the right buckle.)
Be blessed.

Nov 08, 2013 | 2002 Nissan Xterra

1 Answer

Seat belt receiver


i've seen this before on car rear seats but not a truck but i guess it could happen as well the middle belt latch gets twisted/mixed up with the passenger side belt latch , mfg's use a different size belt for the middle passenger belt and it won't latch up with the passenger side belt reciever but does fit inside

ck that i'll bet thats it

Oct 20, 2013 | Chevrolet Silverado 1500 Cars & Trucks

1 Answer

How does the rear seat center seat belt work???


The rear seatbelt of the forester was a bit of a puzzle for me as well when we first got ours. The buckle is really in two parts. The first part anchors the strap, and the second part secures the occupant.

Check if your belt is fully retracted, look in the inertia reel housing at the roof in the boot of the vehicle. Remove it passing the end through the 'loop' in the backrest Make sure that you have the two buckle parts I referred to earlier. There should be an odd looking buckle fixed at the end of the belt, and the more familiar buckle that slides up and down the belt. The end buckle goes into the receptacle vertically below the loop between the centre and window passenger and achors the belt in place. This buckle should not be normally released once used regularly. Once the centre passenger is in place, use the sliding buckle as you would for any other seatbelt and fasten on the receptacle on the other side to secure.

Use same procedure for fixing a car seat or booster, etc.

Sep 24, 2010 | 2002 Subaru Forester

1 Answer

How do we fix front passenger side seat belt retractor on 1999 Ford Taurus? It will not pull out....


you may have to remove the bolt that holds the buckle to the floor. Try to push the belt into the retractor and see if it frees up.

I assume you are saying it is in the locked mode. It has an automatic lock mode for holding a child seat. When the belt is pulled all the way out, it goes into locking mode. You will hear it ratchet when the belt starts going back in.



Section 01-20A: Restraints, Active 1999 Taurus, Sable Workshop Manual
DESCRIPTION AND OPERATION Safety Belt, Lap/Shoulder The dual locking mode retractor on the shoulder belt portion of the combination lap/shoulder safety belt for the front seat passenger and rear seat outboard passengers operates in two ways:
  1. In the vehicle sensitive (emergency locking) mode, the shoulder belt retractor will allow the occupant freedom of movement, locking tight only on hard braking, hard cornering or impacts of approximately 8 km/h (5 mph) or more. The front and rear outboard seat belt retractors can also be made to lock by pulling/jerking on the belt.
  1. In the automatic locking mode, the shoulder belt retractor will be automatically locked and remain locked when the combination lap/shoulder safety belt is buckled and does not allow the occupant freedom of movement. This mode provides tight lap/shoulder belt fit on the occupant and on a child safety seat or infant carrier installation restraint.
  1. When the combination lap/shoulder belt is unbuckled and allowed to retract completely, the retractor will switch to the vehicle sensitive (emergency) locking mode.
sxh~us~en~file=ani_caut.gif~gen~ref.gif WARNING: REAR-FACING INFANT SEATS SHOULD NEVER BE PLACED IN THE FRONT SEATS.
The automatic locking mode must be used when installing a child safety seat on the front passenger seat and rear outboard seats where dual locking retractors are provided

Apr 21, 2009 | 1999 Ford Taurus

1 Answer

Audi A6 rear seat problem


The rear seat pulls out easily.  Grab the front of the seat with fingers under seat on driver side and pull up hard.  do the same on the passenger side and it will unclip.  Then you can move the seat around to get to the buckle.  Install by inserting rear end in first and lineing up the metal tabs w/ the female plastic inserts in the floor and push down hard until it snaps into place.

Mar 28, 2009 | 2006 Audi A6

1 Answer

Factory XM Unit Location


Hi Xit.....The factory XM module is in fact located under the rear shelf trim panel. You will have to remove the rear seat cushion, just pull up on the front of the cushion about 12 inches in from left and right corners. Remove the cushion from the car. Open the trunk and remove nuts located on the seat back just under rear shelf metal. Back inside the rear seat area, remove the seat belt buckle bolts located inboard of right and left lower corners of the seat back. Remove the seat back. You will now be able to see the (2) plastic fir tree pins that hold the shelf panel trim in place. Remove the pins.
Now comes the hard part, remove the right and left quarter sail interior trim panels ( Caution: roof rail air bag located behind right and left panels) the fasteners are located behind the "SIR" plastic buttons in the sail panel trim.
All in all, unless you have the proper tools and take the proper precautions, you might want to take your Cadillac to your local dealer.
Buy the way, is there something wrong with your factory XM module?
Let me know, regards.

Feb 05, 2009 | 2006 Cadillac CTS

1 Answer

Seat belt


well make sure you are using the right buckle for each seat some cars have matching buckles.If this dosent work you will need to buy a new one.

Jan 11, 2009 | 2000 Chevrolet Tahoe

1 Answer

Sat belt replacement


I need to replace the rear passenger-side seat belt buckle clasp but the clasp (under back seat) is connected to the seatbelt for middle backseat passenger.Can I replace just the passenger side without disturbing the middle belt?, cheers,Jen.

Oct 21, 2008 | 2000 Ford Focus

Not finding what you are looking for?
2006 Audi A6 Logo

Related Topics:

155 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

75817 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14337 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...