Question about 2000 Chevrolet Impala

1 Answer

Where is the power steering spout located - 2000 Chevrolet Impala

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 67 Answers

I'd venture to guess your vehicle has the 3.8 L engine otherwise you wouldn't be asking this question. The easiest way to describe it would be to look at your serpentine belt, follow it towards the rear of engine, reach down about a foot and feel around. It is a stupid design and if you have to add fluid, you will need to either have a long funnel or get creative. Good luck and check this when the engine is cold or you will burn yourself!

Posted on Mar 28, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

89 chevy blazer spout connector located


Only Ford products used a spout connector during the 1980s and 1990s.

May 17, 2013 | Chevrolet Cars & Trucks

3 Answers

Whining power steering pump on 2001 bmw 740il


have you put a different type of power steering fluid?

in some instance, if they put a different type of fluid, the solution bubbles up and makes a whining noise when you use the car.

tnx 4 using fixya,

drcool

Oct 10, 2008 | 2000 BMW 7 Series

1 Answer

Show spout connector location 1989 ford f250 xlt


if you look on the distributor you will see the large connector for the mudule bolted to the side. The spout connector will be within inches of the module connector.

Feb 06, 2012 | Ford F-250 Cars & Trucks

1 Answer

Where is the power steering when opening the hood? Need to add power steering fluid and don't know which tube to pour it in


You'll find your power steering by the belt. It will be the only component operated by the belt that has a fill spout.

May 28, 2011 | 2000 Lincoln LS

1 Answer

Replace power steering pump


The procedure is as follows:--- 1) Locate the power steering pump on the driver's side of the motor, which is mounted in front of the engine, near the top.2) You will see a fill spout coming out of the pump with a cap on it that says "power steering fluid."
3) Remove the negative battery cable from the battery
4) Remove the cap from the power steering pump,allow the fluid to drain into the pan.
5) Loosen the bolts that hold the power steering pump to the engine block with a socket wrench. Once the pump is loose, remove the belt from the pulley on the power steering pump. Remove the pump from the engine compartment.
6) Insert new power steering pump in reverse.
7) Reattach the power steering hoses and verify they are secure. Fill the new power steering pump with fluid to the full line shown on the dipstick on the back of the cap for your power steering pump. Place the cap back on the power steering pump.

Thanks. Keep updated for any more query. You can rate this solution and show your appreciation

Sep 22, 2010 | 2001 Hyundai Elantra

1 Answer

Where to fill power steering fluid in ford xf fairlane?.


The power steering pump, on top, has a fill spout with a dipstick -- pour the fluid in there. Power steering pump has a belt around it on the front of the engine -- can't miss it, as they say.

Charlie

Aug 23, 2009 | Ford Fairmont Cars & Trucks

1 Answer

1987 Chevy G20 van. How do I put power steering fluid in it?


The resevoir should be on the power steering pump
If you are good on fluid then maybe you need to check for excessive play in the steering box itself, check idler arm, and tie rod ends.

Apr 04, 2009 | 1992 Chevrolet G20

1 Answer

Where do I add power stearing fluid


The power steering pump on a 1980 corvette is located directly under the alternator. I have found it easiest to reach between the alternator belt and unscrew the cap, then use a long stemmed funnel to fill it. If you shine a flashlight down into the spout, you'l avopid overfilling.

Feb 21, 2009 | 1980 Chevrolet Corvette

1 Answer

Location of the power steering spout


power steering fluid is added on back side of engine near firewall on right side (if lookin at engine backside on left.

Oct 29, 2008 | 2000 Buick LeSabre

Not finding what you are looking for?
2000 Chevrolet Impala Logo

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8195 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...