Question about 1998 Audi Cabriolet

2 Answers

Power steering problem

I have hasd 6 power steering pumps on my car and they all keep blowing

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

You might want to do a thorough power steering system flush....usually big dealers have the proper equipment to do so versus small shops or aftermarket shops. They pour a cleaner into the system, run the car while syphoning and refilling spontaniously. The reason your pump is going is probably having metallic debris floating around from your previously damaged pumps OR its being starved of proper lubrication OR the air is not being thoroughly bled out of the power steering system.

Posted on Feb 01, 2012

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,586 Answers

Do you have the right power steering fluid? Audi uses a proprietary fluid that is not compatible with "normal" power steering fluid (it's called "pentosin"). If you are using standard fluid, it can take out both the pump and the rack as well. If you're at all unsure, you should flush the power steering system out and put in fresh pentosin steering fluid (available at the dealership or online).

Posted on Aug 04, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Video of replacing power steering pump 2000 Pontiac montanspa


Pontiac Grand Am/ Olds Alero 3.4 liter powersteering pump ...

? 16:26
https://www.youtube.com/watch?v=fhOaJUAgPTA
Jan 6, 2014 - Uploaded by JoeTheAutoGuy
this is a video on how to replace a power-steering pump on the Gm 3.4 ... My 2000 Olds Alero (2.4) power steering pump itself is fine, but the ...

How to Replace Power Steering Pump GM 3800 - YouTube

? 19:45
https://www.youtube.com/watch?v=-T8Kek90qAA
Sep 28, 2014 - Uploaded by Rich Rodgers
How to replace the power steering put on General Motor 3800 Engine. ... Sign in to add this video to a playlist. ... Power Steering Pump Pulley Removal and Installation ACDelco - Duration: 6:25. by MyPartsGarage 136,263 views ... How to replace a power steering rack and pinion on a 2005 Pontiac Grand ...

How to Install the Power Steering Pump - AutoZone Car ...

? 6:27
https://www.youtube.com/watch?v=PMX-dBhgwlo
Apr 19, 2012 - Uploaded by AutoZone
How to Install the Power Steering Pump - AutoZone Car Care ...Power Steering Pump Replacement 2000-2006 Chevrolet Tahoe, Suburban, ...

How to replace your power steering pump - YouTube






Dec 28, 2015 | Pontiac Cars & Trucks

1 Answer

1999 Ford Focus. Why does new power steering pipe keep blowing out of coupling on pump?


thee is a correct method to fitting power steering hoses to prevent this It is just not a matter of putting it in and tightening it up
Take it to a steering specialist shop to ensure that the fitting is correct and have it done,

May 08, 2015 | Ford Focus Cars & Trucks

1 Answer

Power steering hose keeps blowing apart


Hi Sharon.I would go to Autozone and buy there power steering pump,lifetime warranty,never have to buy again.Do you know how to replace?If not, answer back and I will try to send you a step by step on how to replace.

Nov 24, 2012 | Cars & Trucks

2 Answers

Changing the power steering fluid on a 2004 chevrolet cavalier


http://www.autozone.com/autozone/repairinfo/repairguide/repairGuideContent.jsp?pageId=0996b43f80cb3bdbFollow your power steering hoses to your steering and disconnect and use a container to catch fluid,you can also loosen hoses at pump and put towel over hole and blow out line to get all fluid out,make sure when you blow , the other end is secure and fluid doesn't go every where,good to have another person helping.Here's a link on how to bleed.

Oct 17, 2012 | 2004 Chevrolet Cavalier

1 Answer

I have a 1997 Chevrolet half ton and it keeps blowing power steering lines. I've replaced my pump and it still does it what should I do


Did you flush the power steering fluid before you installed the new pump? It sounds like something is blocking the line creating pressure that blows the line off

Mar 21, 2012 | 1997 Chevrolet K1500

1 Answer

I have a problem with my power steering..it pulls me all over the road and is dangerous to drive. The horn keeps blowing fuses and the door ajar and interior light will not go off. The passenger side...


Steering Wheel Surges or Jerks
1. Low power steering fluid level.
2. Loose pump drive belt.
3. Weak pump pressure.
4. Sticking flow control valve.

Feb 20, 2011 | 2008 Chevrolet Malibu

1 Answer

Replace power steering pump


The procedure is as follows:--- 1) Locate the power steering pump on the driver's side of the motor, which is mounted in front of the engine, near the top.2) You will see a fill spout coming out of the pump with a cap on it that says "power steering fluid."
3) Remove the negative battery cable from the battery
4) Remove the cap from the power steering pump,allow the fluid to drain into the pan.
5) Loosen the bolts that hold the power steering pump to the engine block with a socket wrench. Once the pump is loose, remove the belt from the pulley on the power steering pump. Remove the pump from the engine compartment.
6) Insert new power steering pump in reverse.
7) Reattach the power steering hoses and verify they are secure. Fill the new power steering pump with fluid to the full line shown on the dipstick on the back of the cap for your power steering pump. Place the cap back on the power steering pump.

Thanks. Keep updated for any more query. You can rate this solution and show your appreciation

Sep 22, 2010 | 2001 Hyundai Elantra

1 Answer

Removing power steering pump from v8 windsor


Section 11-02A: Steering Pump, Power, C-II 1996 Aerostar, Ranger and Explorer Vehicles Workshop Manual REMOVAL AND INSTALLATION Pump and Pulley SPECIAL SERVICE TOOL(S) REQUIRED Description Tool Number Steering Pump Pulley Remover T69L-10300-B Steering Pump Pulley Replacer T65P-3A733-C
Removal
  1. Disconnect the power steering return hose (3A713) at the pump and drain fluid.
  1. Remove the power steering pressure hose (3A719) by unscrewing connector from the pump.
  1. On the Aerostar 3.0L V-6 engine (6007), loosen the drive belt tensioner (6B209) and adjustment bolts.





    Item Part Number Description 1 10346 Generator 2 8501 Water Pump 3 8678 Belt Idler Pulley 4 3A733 Power Steering Pump Pulley 5 6303 Crankshaft 6 2884 A/C Clutch 7 — Without A/C On the 2.3L I-4 and 4.0L V-6 engines, slacken belt tension by lifting drive belt tensioner in a counterclockwise direction. On Ranger 3.0L V-6 engines, slacken belt tension by lifting drive belt tensioner in a clockwise direction. Remove drive belt (8620) from under drive belt tensioner and slowly lower pulley to stop. Remove the drive belt from the power steering pump pulley (3A733).





    Item Part Number Description 1 10346 Generator 2 2884 A/C Clutch 3 3A733 Power Steering Pump Pulley 4 8501 Water Pump 5 6303 Crankshaft 6 8678 Belt Idler Pulley 7 6B209 Drive Belt Tensioner
  1. NOTE: If the drive belt requires servicing, refer to Section 03-05 .

    Remove the drive belt from the power steering pump pulley.
  1. Remove the oil dipstick tube.
  1. Remove the power steering pump support (3C511).
  1. Install Steering Pump Pulley Remover T69L-10300-B on the pulley.
  1. NOTE: Do not apply pressure on the power steering pump rotor shaft (3B559). Pressure will damage internal thrust areas of the power steering pump (3A674).

    While holding the remover tool nut stationary with a wrench, rotate the inner spindle of the remover tool clockwise until the pulley is pulled off the power steering pump rotor shaft.
  1. Remove the bolts attaching the power steering pump to the A/C compressor mounting bracket (2882).
Installation
  1. Install the power steering pump on the A/C compressor mounting bracket. Install and tighten attaching bolts to 41-61 Nm (30-45 lb-ft). On 4.0L engine, tighten to 47-64 Nm (35-47 lb-ft).
  1. Position the support on the A/C compressor mounting bracket. Install mounting bolts and tighten to 47-64 Nm (35-47 lb-ft).
  1. NOTE: Fore/aft location of power steering pump pulley on power steering pump rotor shaft is critical. Incorrect belt alignment may cause drive belt squeal or chirp. Make sure pull-off groove on power steering pump pulley is facing front and flush with end of shaft ± 0.254mm (± 0.010 inch).

    Install the Steering Pump Pulley Replacer T65P-3A733-C and install the power steering pump pulley.
  1. Install the drive belt on the power steering pump pulley.
  1. On the 2.3L I-4, Ranger 3.0L V-6, and 4.0L V-6 engines, position and rotate drive belt on engine. While lifting drive belt tensioner in a counterclockwise direction (clockwise on Ranger 3.0L V-6), slide drive belt under drive belt tensioner and lower drive belt tensioner to drive belt.
    On Aerostar 3.0L V-6 engine, position the belt idler pulley (8678) assembly to give the drive belt the tension specified. Refer to belt tension check in Section 03-05 . Tighten the drive belt tensioner and adjustment bolts to 47-64 Nm (35-47 lb-ft).
  1. Install the power steering pump support, if removed.
  1. Install the oil dipstick tube.
  1. Install the pressure hose tube nut and new Teflon® wagner into power steering pump valve outlet fitting (3D654) and tighten to 41-54 Nm (30-40 lb-ft).
  1. Connect the power steering return hose to the power steering pump, and reposition the clamp.
  1. Fill the power steering oil reservoir (3A697) with Premium Power Steering Fluid E6AZ-19582-AA or equivalent fluid meeting specification ESW-M2C33-F. Start the engine and turn the steering wheel (3600) from left to right without hitting stops to remove air from the system.
  1. Check for leaks and recheck the fluid level. Add fluid if necessary to proper level as specified in Section 11-00 .


    Power Steering Pump and Power Steering Pulley, 2.3L TPH Engine, Ranger Only





    Item Part Number Description 1 2882 A/C Compressor Mounting Bracket 2 N606543-S2 Bolt (2 Req'd) 3 N606069-S2 Bolt (2 Req'd) 4 N605803-S2 Bolt 5 N800199-S8M Screw 6 3D673 Power Steering Pump Pulley 7 3F671 Power Steering Belt Idler Support 8 N806020-S2 Bolt 9 3A674 Power Steering Pump 10 19703 A/C Compressor A — Tighten to 21.2-29 Nm (16-21 Lb-Ft) B — Tighten to 40.3-55 Nm (30-41 Lb-Ft) C — Tighten to 44-51 Nm
    (32-38 Lb-Ft)

    Power Steering Pump and Power Steering Pulley, 3.0L Engine, Aerostar





    Item Part Number Description 1 3A674 Power Steering Pump 2 3C511 Power Steering Pump Support 3 6007 Engine 4 N803564 Stud 5 N802827-S2 Nut 6 N800199-S8M Screw (3 Req'd) 7 N8011179-S2 Screw (3 Req'd) 8

Jun 09, 2010 | 1996 Ford Explorer

Not finding what you are looking for?
1998 Audi Cabriolet Logo

259 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21986 Answers

yadayada
yadayada

Level 3 Expert

63661 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

13215 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...