Question about 1997 Pontiac Trans Sport

1 Answer

Torque on a hamonica balace bolt for a 1997 pontiac transport

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,702 Answers

76 ft. LBS.

Posted on Mar 27, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need steps on putting the motor together....torcking steps really


If your rebuilding you need to buy a new bolt kit. you should not use the old bolts and on the kit instrcution it should tell you the torque

Oct 05, 2011 | 1997 Pontiac Sunfire

1 Answer

Need to know what the torque spec is for my 1997 pontiac sunfire trans pan, 12 bolt pan. its a 4 speed auto.


HI, the torque spec for the pan bolts is 14nm or 124 in lb. snug them down evenly it doesn't take much to over tighten these and strip out the threads.

Aug 28, 2010 | Pontiac Sunfire Cars & Trucks

1 Answer

Flywheel torque setting vw transporter t30


VW Transporter 2.5 TDI-PD, (made year: 2003 ... 2007), engine code: AXD, 130 HP / 3500 rpm.
Important note: use new bolts!
Flywheel/driveplate torque setting: 60 Nm + 90 degrees.
Clutch to flywheel torque setting: 22 Nm.

May 21, 2010 | 2004 Volkswagen Eurovan

1 Answer

What is the right Torque Specification of the cylinder head bolt,main bearing and connecting rod bearing for a 1997 Ford F 150 4.2 liter? Thank you...


Cylinder heat bolt torque:
Torque sequence --------- front | 7 3 1 5 | | 8 4 2 6 | --------- Step 1: Torque all bolts in sequence to 14 Ft/Lbs Step 2: Torque all bolts in sequence to 29 Ft/Lbs Step 3: Torque all bolts in sequence to 36 Ft/Lbs Step 4: in the sequence, loosen the cylinder head bolts three turns. Step 5: Tighten short bolt to 15 - 32 Ft/Lbs Step 6: Tighten long bolt to 30 - 36 Ft/Lbs Step 7: Tighten all bolt to 175- 185 degree note: Do not loosen all of the cylinder head bolts at one time. Each cylinder head bolt must be loosened and the final tightening prior on the next bolt in the sequence.
Main bearing torque:
Torque sequence: Step 1: torque bolts to 91 Ft/Lbs with the exception of the rear main bearing cap Step 2: torque rear main bearing cap bolts to 88 Ft/Lbs Step 3: torque brace bolts to 40 Ft/Lbs
Connecting rod torque:
Torque sequence Step 1: Torque to 29 Ft/Lbs Step 2: Turn an additional 90 degrees

May 17, 2010 | 1997 Ford F150 Regular Cab

1 Answer

Conrod torque settings vw transporter 1.9 abl


1.9 TD ABL-1997 You musr renew all bolts.Then-stage 1-30Nm,stage 2-90degrease

Apr 20, 2010 | 1997 Volkswagen Eurovan

1 Answer

How difficult is it to replace the EGR valve on my 98 Transport.


very easy there are only 2 10mm bolts holding it to remove sometimes the transmission dipstick tube is being held by 1 of the bolts. only if it is a 3.4litre engine though

Jan 27, 2010 | 1997 Pontiac Trans Sport

2 Answers

How do you change Shift Solenoid A & B on a 1997 Pontiac Transport?


Before u dive into this check the torque converter clutch fuse under the hood. If it is blown it will cause the a

Nov 01, 2009 | 1997 Pontiac Trans Sport

1 Answer

My 1997 pontiac transport van will not start


CHECK FOR FUEL AND SPARK FIRST.
CHECK ALL THE CONNECTORS ON EVERYTHING, ESPECIALLY THE IGNITION MODULE CONNECTIONS. THE CRANK SENSOR OFF THE BACK OF THE ENGINE COMES UP ALONG THE FUEL LINES AND CONNECTS TO THE IGNITION MODULE.

Jun 23, 2009 | 1997 Pontiac Trans Sport

1 Answer

I'm trying to find out what the torque is on the cylinder heads for a 3.4 pontiac grand am 99


1st u must use all new head bolts, that said follow this factory procedure from the manual.
HEAD BOLT TORQUE FOOT POUNDS (FINAL TORQUE) TORQUE SEQUENCE --------- | 6 2 3 7 | | 5 1 4 8 | --------- STEP 1: TORQUE IN SEQUENCE TO 33 FT/LBS STEP 2: TURN AN ADDITIONAL 90 DEGREES RECHECK FINAL TORQUE IN SEQUENCE *** CAUTION *** ENGINE USES TORQUE TO YIELD HEAD BOLTS (TTY) THAT PERMANENTLY STRETCH DURING THE INITIAL INSTALLATION. NEW HEAD BOLTS MUST BE USED WHEN CYLINDER HEAD IS REPLACED OR RE-INSTALLED TO OBTAIN PROPER TORQUE. ALWAYS COAT BOLT THREADS WITH THE PROPER SEALANT

Feb 20, 2009 | 1999 Pontiac Grand Am GT

2 Answers

Alternator removal


if all the bolts and wires are off it it should pull off just yank on it make sure there isnt a long bolt in the bottom or where it swivels from

Jun 27, 2008 | 1997 Pontiac Trans Sport

Not finding what you are looking for?
1997 Pontiac Trans Sport Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8195 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...