Question about Chevrolet 1500

1 Answer

I ALSO HAVE THE CODE P1415 IS THE 2 BLACK CIRCLE THING THAT ARE ATTACHED TO THE MANIFOLD

Posted by on

  • santa_nita01 Mar 27, 2011

    2000 CHEVY SILVERADO 1500 5.3

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,702 Answers

Need to know the year, make and model also what engine and transmission before i can look up the code.

Posted on Mar 27, 2011

  • 2 more comments 
  • john nail
    john nail Mar 27, 2011

    code P01415 air system bank 1....check the hoses from the air pump to the manifold, make sure their are no holes or cracks.

  • santa_nita01 Mar 27, 2011

    I did all that no leaks

  • john nail
    john nail Mar 27, 2011

    it could be caused by a bad O2 sensor, for some reasen the on-board computer system does not see a blast of air into the exhust, this is either because there is no blast of air do to either the air pump or valve not working or one of the hoses leaking, or the O2 sensor not being able to detect the blast of air. you could replace a lot of parts trying to guess at a repair you need to have the system tested.

  • beagle44 Sep 01, 2011

    where is the air pump on 2001 5.3 GMC pickup 1500?

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Location of oxygen sensor -1995 nissan maxima


It would be on the exhaust, either right on the exhaust manifold attached to the engine, or on the exhaust pipe just down from the manifold. Look for an electrical connector to it in the exhaust-the only thing on the exhaust with an electrical connection.

Oct 19, 2017 | Nissan Cars & Trucks

2 Answers

P2004 code. where is the imrc valve located?


It is attached to the intake manifold, it is a valve that adjusts the runner length of the intake for optimal performance and fuel economy.

Jan 25, 2015 | 2006 Pontiac G6 GTP

1 Answer

What are codes 12 and 34 for an 87 Chevy Beretta


Hi, holly. Code 12 is "system normal". It is displayed anytime you start checking for codes. Only means the computer is working and diagnostics are working.
Code 34 is your trouble code: "Map sensor signal out of range, low". You probably need a new map sensor. Look for it possibly on the firewall, possibly a small rectangular black box with a 3 or 4 wire connector, and a vacuum hose attached. This sensor is critical for computer to know manifold pressure in the intake, so it can match fuel requirement to air for correct air-fuel mixture. If you can't find the Map sensor, have someone locate it for you. I don't think a new one would be very expensive.

Jan 04, 2013 | Cars & Trucks

2 Answers

2004 ford escape exhaust manifold torque specs?


2b507d0.jpg

Fig. Left side exhaust manifold bolt torque sequence-3.0L engine


22ac5ae.jpg

Fig. Right side exhaust manifold bolt torque sequence-3.0L engine

Both cases, exhaust manifold and new gasket, torque the bolts to 15 ft. lbs. (20 Nm).

Good luck (remember to rate this answer).

Oct 22, 2010 | 2004 Ford Escape

1 Answer

Need to know were the manifold absolute pressure switch is located on a 91 isusu pickup


If its the V6 then its that small black box on the driver side of the air cleaner with that green three prong plug attached to the bottom, the vacuum line attaches to the "front" of the throttle body near the intake manifold.

Jun 11, 2009 | 1991 Isuzu Rodeo

1 Answer

Losing power when the a/c is running


Hi Deettec

your problem seems very easy :) hope this one work with your envoy. Just buy AC DELCO carburetor tune-up conditioner.

How you use it: engine running , AC off please

1. detached the big black airflow hose which is attached in the mannifold of the engine block.

2. ask your friend to step on the gas pedal and set the rpm steady in 2000 rpm only.

3. then spray vigorously in 8 seconds the inside circle opening of mannifold while your friend steady step on gas pedal with steady 2000 RPM only.

4. after you spray, let your freind continue on gas pedal with 2000 rpm for 15 more seconds.

5. attached back the airflow big black hose to the manifold and you are ready to roll with your AC on.

Jul 13, 2008 | 2004 GMC Envoy

1 Answer

Envoy 2004 idle speed


Hi
your problem seems very easy :) hope this one work with your envoy. Just buy AC DELCO carburetor tune-up conditioner.

How you use it: engine running , AC off please

1. detached the big black airflow hose which is attached in the mannifold of the engine block.

2. ask your friend to step on the gas pedal and set the rpm steady in 2000 rpm only.

3. then spray vigorously in 8 seconds the inside circle opening of mannifold while your friend steady step on gas pedal with steady 2000 RPM only.

4. after you spray, let your freind continue on gas pedal with 2000 rpm for 15 more seconds.

5. attached back the airflow big black hose to the manifold and you are ready to roll with your AC on.

if this one doesnt work, please scan your envoy by scanner called TECH II. and find out.

Jul 09, 2008 | 2004 GMC Envoy

1 Answer

Engine Power


Hi your problem seems very easy :) hope this one work with your envoy. Just buy AC DELCO carburetor tune-up conditioner.

How you use it: engine running , AC off please

1. detached the big black airflow hose which is attached in the mannifold of the engine block.

2. ask your friend to step on the gas pedal and set the rpm steady in 2000 rpm only.

3. then spray vigorously in 8 seconds the inside circle opening of mannifold while your friend steady step on gas pedal with steady 2000 RPM only.

4. after you spray, let your freind continue on gas pedal with 2000 rpm for 15 more seconds.

5. attached back the airflow big black hose to the manifold and you are ready to roll with your AC on.

Jun 25, 2008 | 2004 GMC Envoy

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

228 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

80339 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...