Question about 1993 Chevrolet Lumina

1 Answer

Where would find the in line fuse for ignition on 1993 lumina

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Chevrolet Master
  • 1,975 Answers

I don't really see one other then a fuse but have given you a wring diagram from your iginition switch if that's what you are atlking about. If you need any other wiring diagrams bacause that's the wrong one, feel free to email me at with what you need and I have most of the diagrams for your vehicle and will be happy to email you what you need if I have it. Don't worry, no cost. Here's the picture of the diagram from your ignition switch. I hope this helps and good luck.

where would find the in line fuse for ignition on - clifford224_87.gif

Posted on Mar 27, 2011


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where can I find the ignition switch fuse box on a

there is no fuse for ignition it's a fusible link's a wire that is calibrated to melt Under overload or short

hope it helps

Oct 20, 2014 | 1993 Chevrolet Lumina

1 Answer

Where is the ignition switch fuse located on a

Most cars do not have a fuse for the ignition switch itself. Power goes directly from the battery to the switch. Everything after the switch is fused. It might have what is called a fusible link which is a pc of wire that melts off if the current draw is too high. Try to find a wiring diagram for your car on line and it will tell you if it has a fusible link

Oct 20, 2014 | 1993 Chevrolet Lumina

1 Answer

96 Lumina 3.1 won't start. It runs when I spray starting fluid in the throttle body. It has 42psi fuel pressure at the fuel rail. Is it bad injectors?

It is not bad injectors, it is lack of injector electrical pulse, never would all the injectors fail at once. See if you have 12 volts (use a 12 volt probing test light, avail at any auto parts store for less than $5) to one wire of the two wire connector of each injector with the ignition key in run position. If the test shows no hot wire at the injector connectors then check fuses marked ECM1 and ECM2 in the under-hood fuse block. If they are popped then you have a shorted harness or component.

Jun 27, 2012 | 1993 Chevrolet Lumina

1 Answer

How doe I replace the fuses for 1993 chevrolet lumina minivan?

You need the owners manual to find the fuses for what ever has quit. Otherwise you have to pull out every fuse under the dash fuse box and under the hood fuse box,.one at a time to see if it is blown. A fuse may also be defective and a VOM is usefull to confirm same. Pull them out one at a time. Then put it back. Replace a bad one with same color and amp s number.

Jan 28, 2011 | 1993 Chevrolet Lumina

1 Answer

How do i replace an ignition switch on a 1993 chevy lumina with the key broken off in the switch in the on position

you have to remove steering wheel then turnsignal switch to access retainer screw for lock cylinder. remove screw and cylinder will pull out.

May 10, 2010 | 1993 Chevrolet Lumina

2 Answers

Firing order on coil packs 92 lumina z34 5 spd

For the 1992 & 1993 Chevrolet Lumina 3.4L DOHC V6

Firing Order:


Ignition Coil Connections:

May 03, 2010 | 1993 Chevrolet Lumina

1 Answer

Firing order need to know what plug is number 1 and what plug on coil pack is number 1

For the 1993 Chevy Lumina:
I do not know if you have the 2.2L In-Line 4 Cylinder, 3.1L V6, or 3.4L DOHC V6 Engine; however I have included all below.

For the 2.2L (4-Cylinder)
Firing Order:
Ignition Coil Connections:
o <---4
...o <---1
......o <----3
.........o <----2

For the 3.1L V6:
Ignition Coil Connections:

For the 3.4L DOHC V6:
Firing Order:
Ignition Coil Connections:

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at!

Apr 09, 2010 | 1993 Chevrolet Lumina

1 Answer

Hooking up the brake lines to the master cyclinder

well that is easy the front line goes in the front and the raer to the rear

Mar 27, 2009 | 1993 Chevrolet Lumina

1 Answer

1993 chevy lumina

the ignition module should be attatched to the bottom of the coil pack

Jan 13, 2009 | 1993 Chevrolet Lumina

Not finding what you are looking for?
1993 Chevrolet Lumina Logo

208 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides