Question about 2005 Honda Pilot

1 Answer

My 2007 honda pilot while running the vsa light come on and then the engine light come on and the lose power

Posted by Anonymous on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

My 2007 Honda pilot did the same thing. I took the above advice regarding the oil condition (mine was obviously poor, although I change it every 3 mos) and had it changed immediately. The engine light, VSA light, and the triangle with ! all cleared and the vehicle began to run properly again. No problems since. Thank you to Shawn Bruns!!

Posted on Feb 09, 2013

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 2007 Honda Accord. Check engine and VSA light suddenly came on.

MY ENGINE MANAGEMENT LIGHT HAS COME ON AND VSA LIGHT ACCELARATER NOT WORKING

Posted on Oct 16, 2009

  • 21 Answers

SOURCE: My Honda Element 2008 has a VSA Warning light and

It may be as simple as your oil condition or oil level. If you have poor oil in your engine the VTEC system will not operate properly and when RPMs reach 2800 or so it will buck. If everything checks okay with the oil have the code checked for your check engine light/VSA light.

Posted on Oct 26, 2009

  • 1 Answer

SOURCE: Whle driving my 04 diesel

Hey did you ever figure out what was wrong with your car? Mine is doing the SAME exact thing

Posted on Aug 31, 2010

  • 1 Answer

SOURCE: steps to reset 2007 honda pilot oil gauge

From page 232 in the 2007 Honda Pilot Owners Manual.

1. Turn the ignition ON.
2. Press the Select/Reset knob until the engine oil life indicator is displayed.
3. Press the Select/Reset knob for more than 10 seconds. The engine oil life and maintenance item code(s) will blink.
4. Press the Select/Reset knob for another 5 seconds. The maintenance item code(s) will disappear, and the engine oil life will reset to "100".

Posted on Apr 23, 2009

SOURCE: 2007 Honda Pilot engine light on and starting a

You must make a diagnostic through out the ecu,it can be probably the crankshaft sensor.

Posted on Mar 27, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

VSA light with a triangle having ! sign doesn't go away.


try this-- sit in the car put your foot on the footbrake then insert key & try to start ---if it starts and no warning lights come on --its your brake light switch

Jan 04, 2017 | Honda Pilot Cars & Trucks

1 Answer

Have a 2009 Honda Pilot vpn4 @ vas light came on help


im assuming you mean VSA light, try the VSA button on dash hold it down till VSA disapperes from the dash

Oct 14, 2016 | Honda Cars & Trucks

1 Answer

After driving my 2007 honda pilot for about 25 to 30 miles the engine light comes on then VSA light comes on then I lose power.SO I shut it off the car & have to wait a while then I can drive a li


Why did you not leave the vehicle at a repair shop or dealer
to be properly diagnosed & repaired

Any time you get any dash light on after the motor is running I
check for codes that day & get on with the required checking
& resolving within days or use another vehicle

You should stop using a vehicle with check lights & faults
& forget the free codes checks at the parts stores


Always use a professional scan tool & look at all data real time
generic & enhanced something a code read won't do & go for
a long road test with the scan along

Cylinder misfires will ruin an expensive exhaust converter
as will vacuum leaks,leaking injectors etc.

Today's vehicles need to be 100% or parked or you create
problems,do damage,run up your repair costs & shorten the
life of the vehicle all thanks to the Govt Emission non-sense

Mar 10, 2014 | 2007 Honda Pilot

1 Answer

2007 Honda Pilot VSA Stays on with the Triangle


A hazard warning could just mean an oxy sensor...I would inspect the vehicle ft. to back ...check brakes and all ...make sure all vacumn hoses and plugs /wires /and brakes are good.Then disconnect the negative battery cable to reset the system....If it comes back on it is probably just an O2 sensor going bad....meaning oxygen sensor...this is an air fuel mixture sensor which is common to go bad on all cars and trucks......No big deal....Hope this helps ....Metalpoet

Oct 30, 2011 | 2007 Honda Pilot

1 Answer

How do i repair the vsa unit on a 2006 honda accord?


I found this online. replacing the EGR valve would be a good thing to check as a VSA repair would be really expensive, it doesn't make sense that these should go bad, and it does not seem like it is something you can do yourself.
answers.yahoo.com/question/index?qid=2009040118264G
'This is going to sound funny, but your problem is not with the VSA. Here's what the dealer is missing in their diagnosis.

the way the Vehicle Stability Assist system works is that when a loss of traction is sensed (when one wheel is spinning faster than the other) then the control for the VSA starts to cut out engine cylinders to reduce the power to the wheel until traction is restored. When the control unit enables the VSA the exclamation point icon comes on and it will stay on until the engine is turned off.

Now for the twist--when the engine has a misfire that causes the engine to lose power then the VSA system "thinks" power is being reduced to restore traction and it puts the exclamation point icon on. So in essence, the VSA is being fooled into thinking that the system is enabled when in reality the problem is one of a reduction of engine power.

I have seen this numerous times on the Accords and Pilots. Almost always the problem is with the EGR valve. That doesn't mean that it is in your case, but my experience is that it usually is. Couple that with the history of EGR valve problems on the Honda V-6 and the the odds are strong that's what your problem is. However, anything that could cause a loss of power or misfire in an engine, such as an ignition coil breaking down or bad fuel could cause this problem.

In most States the things that can cause this problem are covered under a 3 year 50000 mile emissions warranty. I'd ask the dealer to do the diagnosis for an engine misfire and see where that goes.'

Aug 30, 2011 | 2006 Honda Accord

2 Answers

2006 CRV - VSA light and triangle are lit? What


The vsa and check engine light cam on because their is a fault in the system that needs to be looked at.To be on the safe side i would check the oil and transmission fluid .
Try doing a reset. Disconnect battery for a minute, this will clear the code ( light ). If the light comes back then take it auto zone or dealer to have the code read.
You can have the codes read for free at your local parts store like auto zone.
Have them scan it and let me know what the codes are.


Dec 18, 2009 | 2007 Honda CR-V

2 Answers

2007 Honda Accord. Check engine and VSA light suddenly came on.


MY ENGINE MANAGEMENT LIGHT HAS COME ON AND VSA LIGHT ACCELARATER NOT WORKING

May 04, 2009 | 2007 Honda Odyssey

Not finding what you are looking for?
2005 Honda Pilot Logo

4,306 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...