Question about Toyota MR2
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If the engine stalls abruptly on your Cirrus, as if some one clamped
it, then I would suspect that the 'lock-up' function on the torque
converter of the transmission is in the lock-up position. That means it
is the same as popping the clutch on a conventional transmission car,
which cause the same stall. If you can't drive the car, I would call
around to several independent transmission shops to find one that is
familiar with the Chrysler 41TE transmission and that appears to be
honest. Ask if they have a diagnostic readout box to communicate with
the transmission control computer. If they do then have the car towed
there and let them try a readout. If they get a code 38 or 0740
(depending upon what year model you have there) then that would show
that the lock-up is the problem. If you are lucky the problem will be
with a solenoid switch or valve in the box on the side of the
transmission which can be corrected easily without removing the
transmission. Because this possibility (along with about 6 other
causes) is worth pursuing, I would want a shop that is not going to
talk you into a "rebuild" without first looking into all the possible
reasons for the lock-up condition so you aren't "taken for a ride".
So ask friends if they know a good honest shop and check them out as to how well they understand the Chrysler transmission. You may end up at a Chrysler dealer, but insist on their trying all the other possible causes before authorizing removal of the transmission which is a very expensive repair and may not be necessary.
Posted on Jun 29, 2008
SOURCE: 1994 Toyota Camry Won't start.
you should check 3 things. AIr, Fuel, and "spark"
your cars could have many problems. Ignition module, fuel injectors, Mass Airflow Sensor.
You should check into all of these 3 things.
a crank-no start could be many things.
it could even be a cam positions sensors resistance going up when the engine heats up. Cracnk- no start means testing. n like i said
The motor is getting Air, There is Fuel being put into the cylinders, and the Spark plugs are firing.
Posted on Mar 24, 2009
Clck here for the correct wire colors for Toyota. http://www.autotoys.com/New_Tech/Wire_codes/TOYOTA_WIRE_COLORS/toyota_wire_colors.htm
Posted on Apr 17, 2009
there is no need to pay for the wiring diagrams, until you ask for immediate response(premier service). i have attached four wiring diagrams for your reference.Please rate my solution as helpful.s of 2004 Nissan Sentra, for your reference. I hope its helpful for you. Please rate my solution as helpful. Regards, Venu.
Posted on Feb 26, 2010
Tips for a great answer:
Jul 27, 2015 | 2002 Toyota MR2 Spyder
Aug 09, 2014 | 2001 Toyota Prius
Oct 17, 2012 | Chevrolet Aveo Cars & Trucks
Aug 31, 2017 | 2002 Toyota RAV4
Jun 28, 2010 | 2001 Toyota Echo
Apr 22, 2010 | 2001 Toyota Land Cruiser
Feb 13, 2009 | 2007 Toyota Corolla
Dec 05, 2008 | 2007 Toyota Land Cruiser
73 people viewed this question
Usually answered in minutes!