Question about Dodge Durango

3 Answers

Both my right & left turn signals aren't working but hazards are

Posted by on

Ad

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Dodge Master
  • 373 Answers

The hazards will work even if there are bulbs out. The hazard flasher and turn signal flasher are different, and are on a different circuit.
First, you need to check your fuses. Look in the owner's manual for the location of your fuse box and which fuse.
Next, you need to check your bulbs. Generally, the turn signals will not work if even one bulb is out. In your case, you'll be looking for a bad bulb (or connection) on each side of the car.
If you are absolutely certain that all the bulbs are OK, you can locate and replace the turn signal flasher.
The next suspect will be the turn signal switch in the steering column. At this point, you'll need to consider a dealer or repair shop.
Good Luck.

Posted on Mar 27, 2011

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 266 Answers

If you can locate the hazrd flasher unit under the dash on the drivers side, the turn flasher unit should be right beside it and looks the same. Unplug and switch the 2 flashers and see if the turn signals work. The flasher unit is a silver and round. they are usually close to the stering colum. Let me know if that helps.

Posted on Mar 27, 2011

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 693 Answers

They operate on two different circuts, I would start by checking fuses. Good luck !

Posted on Mar 27, 2011

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Chev Cavalier 2003 only one rear turn/brake/hazard light

I have a 2002 Chev Cavalier that had the same exact problem. I replaced the bulb harness (purchased from a chevy dealership for around $5) which was fairly easy to do. I have had zero problems with it since.

Posted on Dec 03, 2008

SOURCE: TURN SIGNAL, BRAKE & HAZARD LIGHTS

No Turn Signal Operation (blinker)The turn signal lights in your car are a basic electrical system that controls the front and rear blinker lights to alert the intended direction of the vehicle. We have listed some of the most common problems and repair troubleshooting tips below:
Troubleshooting Procedure
To start troubleshooting this problem:

  • Turn the key to the on position (do not start engine)
  • Inspect the system fuse located in the fuse panel and replace if needed. If you cannot find the location of the blinker fuse consult your owner's manual or an online repair manual
  • When a blinker flasher fails it can cause blinker lights to say on, not blink, or not go on at all. To test the blinker system flasher, remove the flasher unit and insert a jumper wire between the two terminals. If blinker stays on in both directions without blinking, replace the flasher. If you cannot find the location of the blinker flasher consult your owners manual or an online repair manual.
  • 1b7f814.jpg

Posted on Jul 09, 2009

  • 4 Answers

SOURCE: 99 Chevy Tahoe... Rear turn signals, brake lights, and hazards

I had this problem, and to be honest, it happened to the left side about a week later...it's the board that the bulbs plug into...it's a very common problem with this model. So popular that you can normally get the socket board off the shelf at a parts store! it's extremely simple to replace, and I replaced all the bulbs at the same time!

Posted on Oct 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Turn singles and hazards are not working on my 2001 deville


I would replace the turn signal hazard combo switch.

Nov 28, 2016 | Cars & Trucks

1 Answer

The fuse for a right turn signal on a 2001 Buick Park Avenue


The left an right turn signals get there power from same fuse ,HZDT/SG fuse 15amp in the left under hood fuse box. through the turn signal hazard flasher module. Here is how they work .
Turn Signal/Cornering Lamps
The HZDT/SIG fuse in the fuse block - underhood - left supplies battery positive voltage to the turn signal/hazard flasher module and have ground at G202. The turn signal lamps may only be activated with the ignition switch in the ON or ACCY position. The T/SIG fuse in the fuse block - underhood - left supplies battery positive voltage to the turn signal switch. When the turn signal switch is placed in either the left or right position, current flow is from the turn signal switch assembly to the turn signal/hazard flasher module. The turn signal/hazard flasher module then sends an on-off voltage signal to either the left or right turn signals and their instrument cluster (IPC) indicator. When the hazard switch is pressed, all the turn signal lamps will flash including both IPC turn signal indicators. The left turn signals have ground at G106, G400 and at G402. The right turn signals have ground at G105 and G400. The turn signal switch supplies battery positive voltage to the cornering lamps, the left cornering lamp has ground at G105 and the right cornering lamp has ground at G106.The turn signal switch or the turn / hazard flasher module is bad or there is a wiring problem. Go to you tube an check out a few videos on basic electrical testing ,then get a DVOM - digital volt ohm meter , an wiring diagram an trouble shoot the circuit . There may even be a video on test turn signal circuit .

Dec 04, 2015 | Buick Cars & Trucks

1 Answer

2002 Pontiac Grand Am turn signals not working. Could this be a fuse?


None work , left , right , front or back ? Check TURN LPS fuse C 10 Amp -in Left instrument fuse panel ! More then likely it's the switch on the steering column or the hazard switch , power for turn signals come from the hazard switch !
Fuse Block - Left I/P- On the left side of the I/P

May 27, 2015 | 2002 Pontiac Grand Am

1 Answer

After i hit someone from the back my left turn signals stopped working but the right side does work. Also the hazard signals on the left side do not work but the right does work. what should i do?


The wiring for your left turn/hazard might be damaged. The turn and hazard signals use the same bulbs and wiring, but get their signal from different switches.

Aug 08, 2012 | 2004 Chevrolet TrailBlazer

1 Answer

Hazard signal and horn do not work on my 91 Toyota Celica Gt.


Check the flasher & horn relay.Have no idea where they would be on your car.

Jan 27, 2010 | 1991 Toyota Celica

3 Answers

Im trying to change my fuses for my hazrard lights. on a G6 2006 poniac. i cant find it in the manual. don't really know if thats what you do, cause when i push the hazrard button they don't work.


This is not fuse, is an flasher, and maybe is integrated with hazard & turn signal module.

Also need review this RECALL

Hope helped with this. Good luck.

Nov 09, 2009 | 2006 Pontiac G6

3 Answers

Turning signal and 4-way hazard flasher not working


the actual hazard lights switch is also a relay and linked to signals left/right try checking this out ?

Aug 30, 2008 | 2000 Toyota Sienna

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

574 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

77514 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...