Question about 1997 Oldsmobile Bravada

1 Answer

Wipers don`t work at all - 1997 Oldsmobile Bravada

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,510 Answers

The fuse must be in the main fuse box. The position and function of the fuses is normally marked on the inside of the fuse box cover and also in the owner's handbook. If you don't come right with these, work your way through the fuses looking for a blown one. To ease your search the wiper fuse it should be around 15 to 20 amps.

Posted on Mar 27, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

95 s10 4x4 wiring issues wipers don't work they


sounds like the ignition switch. usually different items go out and then work when you have a bad connection

Jul 22, 2014 | Cars & Trucks

1 Answer

Wipers malfunction


You will need to replace the module that is attached to the w/s wiper motor (black cover). Sometimes tapping on this cover will make the wipers come on when they are not working.

Mar 02, 2013 | 1996 Chevrolet Silverado 2500

1 Answer

Windshield wipers don't work on 91 taurus, fuse is ok


Maybe worth checking wiper switch or wiper motor.If you have a multi-meter it maybe worth checking power supply to switch and motor..hope it helps.....

Dec 30, 2012 | 1991 Ford Taurus

1 Answer

Wiper don't work at all 89 Dakota...just replaced


their should be a wiper relay in the system check also at the wiper switch

Sep 04, 2012 | Cars & Trucks

1 Answer

Windshield wiper doesn't work


If both wipers don't move, could be the switch or the wiper motor.

Jul 02, 2012 | 2000 Pontiac Montana

1 Answer

My front wipers do not work, the washer on the front and the rear wiper works fine, they are all on the same thing


HI. This is a possible motor issue. To confirm, use this procedure. it will help isolate the actual issue at hand.

1.Make sure the battery has a strong charge and is in good condition. Use a voltmeter to get a reading if necessary.

2.Connect a jumper wire between ground and the wiper motor. Turn the key on but don’t start the engine. Turn the wiper switch on. If the motor works, check for a corroded or loose ground connection.

3.Turn on the car key but don’t start the engine. Turn on the wipers. Check for voltage at the wiper motor with your voltmeter. If you get a good voltage reading, turn the key off and disconnect the motor from the wiper linkage.

4.Move the wiper arms by hand. If they are stuck, you have found the problem. If the wiper arms move freely by hand, go to step 5. If voltage is not reaching the motor go to step 6.

5.Remove the wiper motor by disconnecting the plug and removing the bolts using a wrench or ratchet. Use a pair of jumper wires to connect the wiper motor directly to the battery. If the motor does not work, replace it.

6.Turn on the key but don’t start the engine. Get a voltage reading across the wiper switch. If there is voltage, use a jumper wire to bypass the switch, if the motor works now, replace the switch, otherwise go to step 7. If there is no voltage at the switch, go to step 8.

7.Check for continuity at the wire between the switch and the motor. The wire could be loose or disconnected.


8.Check the wire coming from the fuse panel to the wiper switch. It could be disconnected or loose.

Nov 23, 2009 | 2004 Jeep Liberty

1 Answer

Driver windshield wiper does not work


HI. This is a possible motor issue. To confirm, use this procedure. it will help isolate the actual issue at hand.



Step 1

Make sure the battery has a strong charge and is in good condition. Use a voltmeter to get a reading if necessary.

Step 2

Connect a jumper wire between ground and the wiper motor. Turn the key on but don’t start the engine. Turn the wiper switch on. If the motor works, check for a corroded or loose ground connection.

Step 3

Turn on the car key but don’t start the engine. Turn on the wipers. Check for voltage at the wiper motor with your voltmeter. If you get a good voltage reading, turn the key off and disconnect the motor from the wiper linkage.

Step 4

Move the wiper arms by hand. If they are stuck, you have found the problem. If the wiper arms move freely by hand, go to step 5. If voltage is not reaching the motor go to step 6.

Step 5

Remove the wiper motor by disconnecting the plug and removing the bolts using a wrench or ratchet. Use a pair of jumper wires to connect the wiper motor directly to the battery. If the motor does not work, replace it.

Step 6

Turn on the key but don’t start the engine. Get a voltage reading across the wiper switch. If there is voltage, use a jumper wire to bypass the switch, if the motor works now, replace the switch, otherwise go to step 7. If there is no voltage at the switch, go to step 8.

Step 7

Check for continuity at the wire between the switch and the motor. The wire could be loose or disconnected.

Step 8

Check the wire coming from the fuse panel to the wiper switch. It could be disconnected or loose.

Oct 10, 2009 | 2002 Toyota Highlander

2 Answers

Rear wiper does not work at all. front wipers work fine. rear washer works


1. check the fuse to the rear wiper motor
2. check for power to rear wiper motor at the motor (power wire going in to the wiper motor with rear wiper switch on)
If you have good fuses & have power going in to the rear wiper motor...
3. Pull old rear wiper motor and install a new rear wiper motor.
Thank you please drive thru......

Feb 26, 2009 | 2001 Ford Expedition

Not finding what you are looking for?
1997 Oldsmobile Bravada Logo

Related Topics:

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...