Question about Chrysler Voyager

1 Answer

I have an abs light on. It came on about 5 weeks ago. We have had all wheels off and checked for dirty sensors. We are at a loss, any ideas please?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Chrysler Master
  • 373 Answers

I'd check the ABS wires for breaks and bad connections.
Then try taking the car to an Autozone or another parts store that offers free Code Reading. Autozone will check your Engine codes, and I'm pretty sure they can also give you the Chassis codes.
The only time I had an ABS light, it turned out to be a wheel sensor. It was part of the wheel bearing assemblt, and was pretty expensive. Some cars have seperate sensors held on with one screw.

Posted on Mar 27, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Abs light is on and remains on constantly.


Check the wheel sensors that detects the RPM to the mother board. if there are faults in the connection, faulty sensor , dirty or loss of wiring then it is possible that the ABS will indicate.
Also a failure of the main unit of the ABS can be a reason.

Jun 30, 2011 | 1999 Daewoo Lanos

1 Answer

On my way home today my abs and tc light came on. My car just passed inspection a few weeks ago. any idea why the lights came on while driving home?


IF THEY BOTH CAME ON AT ONCE ITS MOST LIKELY ONE OF THE WHEEL SPEED SENSORS YOU WILL NEED A SCANNER THAT CAN READ LIVE DATA TO SEE IF ALL THE WHEELS TURN AT THE SAME SPEED .A SCANNER WILL ALSO GET YOU ANY ABS CODES IN THE COMPUTER.

Apr 05, 2011 | 2001 Chevrolet Cavalier

1 Answer

I have an abs light on. It came on about 5 weeks ago. We have had all wheels off and checked for dirty sensors.\r\nWe are at a loss, any ideas please?


Usually it is easier to get the codes extracted from the vehicle computer by your local dealer or garage that can do this.check their prices first as they can really vary.Check also you local parts shops,they sell small cheap units that can do simple checks on these.Just make sure that they do ABS read and reset,not just CHECK ENGINE.There should be a precise code for whether it is a wheel speed sensor or at the pump etc.check the brake fluid level in the reservoir as well at the ABS pump if it has a separate one.
Also ensure that the ring that the sensors read off at each hub aren't damaged.Clean these and the sensor heads well if you havent already then recheck.Sometimes light wont go out until history logged is cleared by a code reader.
Have you had the brakes done recently?or also check for play in any of the hubs,this can sometimes trigger a sensitive sensor.
hope this helps you get to the source and repair,or get back to me with your findings.

Mar 27, 2011 | 2001 Chrysler Voyager

2 Answers

Abs light came on, just had brakes worked on a ouple weeks ago


check the sensor wires and connections mech[person] doing repair may have hit or damaged wire/connection for the abs

Jun 07, 2010 | 2001 Ford F150 Styleside SuperCrew

1 Answer

Abs light and brake light turned on brake petal to the floor


A bad wheel bearing can make the abs light come on.

Jun 24, 2009 | 2000 Dodge Durango

1 Answer

2003 s-10. I replaced the front disc brakes and


ABS is designed to seance when the wheels stop rapidly and the car is still moving. if it has kicked in before the wheels lock then i would start at the sensors then if they check out i would check the ABS computer if equipped. If it doesn't have an ABS module then it will be controlled by the ECM " engine control module " Hope this helps. Good luck.

Jun 05, 2009 | 2003 Chevrolet S-10

1 Answer

Abs brakes making noise.


Well the abs light reads wheel speed sensors located behind the rotors you will see a little wheel with notchs in it and when reads as if the wheel is locked up it will activate the abs i would inspect those sensors for damage possible one got bent or has junk on it interfearing with the signal and take it back to the place that did the brake job hope this helps

Mar 28, 2009 | 2006 Chevrolet Equinox

1 Answer

2003 Oldsmobile Silhouette Trac System and ABS Stop working


I think your abs sensor is dirty and needs to be cleaned.

There are many things that can cause your ABS light to come on. Some are serious, so you should never just ignore the light. But there are times when the light comes on and can be met with a simple solution. For instance, a dirty ABS wheel sensor can cause the system to trigger the ABS light during self evaluation. You'll be shocked when you see how much road gunk can accumulate on this very important sensor.
Even if your ABS light hasn't made an appearance, it's a good idea to clean the sensor. A good time to do it would be during brake pad replacement when you have the wheels off anyway
Begin by loosening your wheel lugs, then jack the front of the car up and rest it securely on jack stands. With the car safe, remove the wheel lugs and take the front wheels off.
With the wheel off, turn the steering wheel all the way in, opposite the side your working on. For example if your working on the passenger side, turn the wheel all the way toward the drivers side.

Locate the ABS wheel sensor. Remove the bolts that attach it to the rest of the suspension. You may also need to remove a few bolts to pull the sensor away from the vehicle for cleaning. Follow the line to see if there are more bolts. Remember not to force it or pull too hard. Then along the line theres another two 10mm bolts, that need to be removed, just follow the abs sensor line to get at them.

With the sensor free, take your rag and wipe the sensor until its clean. I prefer not to use any chemicals on the sensor to avoid potential problems. If you need to, use mild soapy solution and rinse well.
Reinstall the sensor in the same manner it was removed.

Dec 07, 2008 | 2003 Oldsmobile Silhouette

2 Answers

'98 Windstar ABS and traction control lights after getting brakes done


Prior to the brakes being replaced you more than likely had metal to metal contact which can throw metal shavings on the ABS wheel sensors. This metal shavings stick to the road grime on the wheel sensors showing the ABS computer a false reading making the ABS light come on. On Ford Windstars, the ABS light and the traction control light are on the same circuit. A simple (and cheap) fix is to pull the ABS wheel sensors and clean them with brake cleaner or throttle body cleaner. Make sure you dry them well and reinstall. On the Windstar there is one bold holding the sensors to the back of the wheels. I recommend you spray some WD40 on the bold and wait about 10 minutes before removing.
If this doesn't fix the ABS light and brakes, you can have the ABS system diagnosed at a shop for about an hour labor. (Usally about $100)
I have fixed many of these type of problems just by cleaning the ABS wheel sensors. Good luck.

Jul 30, 2008 | 1998 Ford Windstar

1 Answer

ABS Light gives out three codes,Where can I get a list of codes to trouble shoot by?


Hi,

Most Honda ABS warning light will blink in 2 parts, main system and then sub system to form the code pair. As an example is 3 blinks then 3 blinks is a code 3-5. Once determined, reference below listing.
1 - ABS pump motor over-run
1 2 ABS pump motor
1 3 high pressure leakage
1 4 pressure switch
1 8 high pressure system
2 1 parking brake
3 1 pulser RF
3 2 pulser LF
3 4 pulser RR
3 8 pulser LR
3 12 different diameter tires
4 1 wheel sensor RF
4 2 wheel sensor LF
4 4 wheel sensor RR
4 8 wheel sensor LR
5 - rear wheel lock - R/L
5 4 rear wheel lock - R
5 8 rear wheel lock - L
6 - fail-safe relay - F/R
6 1 fail-safe relay - F
6 4 fail-safe relay - R
7 1 solenoid - RF
7 2 solenoid - LF
7 4 solenoid - R
8 1 ABS function
8 2 CPU comparison
8 4 IC self-check

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

Jul 25, 2008 | Honda Accord Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...