Question about 2000 Daewoo Lanos
Remove the catalisador,, that is de problem the engine don't turn on ...
Posted on Jul 31, 2012
Always good to check first if you have spark to your plugs,fuel to you injection rail.But because you have replaced head,it would pay to ensure that the cambelt timing and tension is precise before trying to start.If this is the same as our models here.you must ensure that the tensioner is set so that the belt tension causes the small arrow to align to the correct mark on it.failure to get this right usually causes hard starting or the valves to strike onto the pistons.Suggest to carry out a compression test on each cylinder to see if in spec.Low or zero reading on all cylinders will denote cam timing incorrect or bent valves.
Hope this helps or get back with your findings and will try to remedy this for you.
Posted on Mar 27, 2011
Is engine cranks? little more info please
Posted on Mar 27, 2011
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Head gasket?
You remove air filter and other parts.
Then you remove head cover.
Then you unscrew and remove the head,
Clean a bit the block
Screw back the head
Follow head tourqe settings and screw orders on diagrams when mounting back the head.
The whole thing is not thst easy as it may seem, if you want to DIY you will need to buy the Haynes manual for your car. There you find a step by step procedure with pictures.
Here is a repair manual.
Also enquiry to Haynes.Haynes manuals are the best.
Here is how to replace head gasket on a Honda, with lots of pics, procedure is the same, torque values and screwing order are different. It is not a job for absolute beginners
Do not forget to rate the solution
Posted on Aug 31, 2008
SOURCE: 2000 daewoo lanos head torque
the 2000 daewoo lanos 1.6L dohc head torque is as follows , step 1 = 18 ft. lbs. , step 2 = 70 degrees , step 3 = 70 degrees , step 4 = 30 degrees . sequence is as pictured .
there ya go , gears to the left , looking at the front of engine .
Posted on Jan 09, 2009
Tips for a great answer:
Feb 11, 2017 | 2000 Daewoo Lanos
Nov 27, 2016 | 2000 Daewoo Lanos
Jul 15, 2012 | 2002 Daewoo Lanos
Oct 29, 2009 | 2001 Daewoo Lanos
Oct 27, 2009 | 2000 Daewoo Lanos
Oct 06, 2009 | 2000 Daewoo Lanos
195 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: