Question about Toyota Tacoma

1 Answer

At first i couldnt get it out of park and realized that i had no brake lights. i checked the fuses and noticed that the fuse for the brakes was blown. i changed it out and everything started to work again. i could shift it out of park and had brake lights again but it keeps blowing the fuse for some reason. ive replaced 3 blown fuses in the last 4 to 5 days. what could be shorting out to blow the fuses like that

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 72 Answers

NEED TO CHANGE THE BRAKE LIGHT SWITCH

Posted on Mar 27, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1996 Mitsubishi Galant: electrical


Fuse able link by the battery .start there

Apr 02, 2017 | 1996 Mitsubishi Galant

1 Answer

2004 mercury mountaineer got lock in park today,, got it undone. Noticed it said check fuse for the breaks.. I had no break lights.. well, can't figure out which fuse that is.


BRAKE LIGHTS AND SHIFT LOCK
Look under the dash, on the brake pedal arm. There are one or two switches that activate brake lights and/or shift unlock. Check for loose mounting nut or a missing rubber nubber. Is the brake pedal coming all the way back up? Look on the floor for something not usually found there. These switches are adjustable and it may be as simple as adjusting them. Have a helper look for brake lights on and shift lever unlocked while you push and release the switches with your finger. Depress the brake pedal to get it out of the way. Remember to set the park brake first. Could just be a bad switch or loose connector. Check fuses and the bulbs. Is shifter fully in Park?

Aug 20, 2011 | 2004 Mercury Mountaineer

1 Answer

2008 Saturn Vue Stuck In Park. The car starts fine however when you try to shift out of park the shifter is locked up and won't budge. You have to restart the car multiple times to get the shifter...


these have a safety system so the shifter won`t go into any gear unless the brake is pushed(indicating someone sitting in the drivers seat),if the brake lights aren`t working this indicates that the fuse that operates the shift lock solenoid and brake lights is not working and needs replacing.check the fuses and replace the fuse and things will probably return to normal.

Aug 05, 2011 | 2000 Ford Expedition

1 Answer

My break lights do not work at all. 2000 Chevy Lumina- We dont know where to begin to trace the wires we tries tracing them from the rear and couldnt find the right wire.The center light in the window does...


i am CONFUSED? you say they dont work, then you say "when you press down on the brake that the switch for the lights causes them to go off instead of turning them on when messing around with it but couldnt figure this out"........ if NO brake lights work, then check fuse 23. . if the fuse is GOOD then check wires at the brake switch. Orange should have 12V, when brake pedal is pressed then the WHITE should have 12V and lights should be on. the center rmounted stop light (BACK WINDOW) has 2 bulbs, make sure they are good. The center light is wired differently. If the center light works but brake lights do not, the turn signal switch could be bad. I assume THE TURN SIGNALS are OK? IF the turn signals are working OK, the wiring between the turn signal switch and the brake lights is GOOD

Aug 03, 2011 | 2000 Chevrolet Lumina

2 Answers

The gear shifter column will not go out of park, i also noticed i have no brake lights, however all my fuses are good.? what next?


Hi!

I think you have a bad brake light switch, Because the shift lever has a solenoid that works if the brake pedal is depressed. So I would say check the brake switch which should be under your brake pedal. Good luck

Jul 03, 2011 | 1998 Ford Expedition

1 Answer

When i turn d car on i cant shift from parking to any other gear and notice the brakes lights dont work, how ever when i turn the key half way before ignition i can start the car in neutral then shift to...


Look in your Vehicle manual for the fuse panel diagram and check the BRK Fuse, and also the Tail light fuse. If both are good, the problem may lye in the brake light switch attached to the brake pedal.

Mar 15, 2011 | Dodge Neon Cars & Trucks

1 Answer

Hi, I have a 96 windstar. One of the wires on the brake light switch down at the brake pedal has broke at the plug and then when I went to repair it touched the steering bar and sparks flew. Once I...


fuse #7 - 15 amp , Fuse #21 - 10 amp.

Maybe you blew solid state module. There is a manual bypass.

Shift Interlock System A shift interlock mechanism prevents shifting the transaxle out of the PARK position unless the brake pedal (2455) is applied. The shift lock actuator is energized when the ignition switch is turned to the RUN position.
  • This locks the shifter in the PARK position.
  • When the brake pedal is applied and the stoplight switch (13480) is activated, the shift lock actuator is deactivated and the shifter can be moved out of the PARK position.
-----------------------------------------------------
  • Shift Interlock System Does Not Release or Lock Properly
  • Fuse.
  • Circuit.
  • Shift lock actuator.
  • Gearshift lever adjustment.
  • Stoplight switch.

----------------------------------------------------------

1c38cb8.gif

Oct 30, 2010 | 1996 Ford Windstar

2 Answers

No brake lights, fuses keep blowing and wont shift out of park


I would look for a wiring short in the trunk at the taillamp area, or, inspect the sockets for the taillamp bulbs for corrosion. In any case, you have a short circuit in the trunk area, also check the wire that comes from the body & goes up the trunk hinge on the driver side; that wire may be chafed, and it may be shorting out. Hope this helps; please get back to me if you need any further assistance.

Nov 04, 2008 | 1996 Toyota Corolla

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

359 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...