Question about 2004 Ford Explorer
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: front bumper removal
Plastic rivets in the wheel wells, clips under the headlights, remove the grill, plastic clips under the front,
too much to write.
Go get a repair manual
Posted on Oct 07, 2008
you need a repair manual, Haynes or Chilton, there are too many places to explain here in this format, if you can not find these book at your local parts store, then try your local library, then sometimes even have the dealer shop manuals for your use, hope this helps
Posted on May 20, 2009
You only need to remove the bumper cover. Remove both tail lamp assemblies. Under the tail lamps you will a 10mm and a 8mm bolt, remove these. Look into each rear wheel well rearward and you will find a T20 torx screw on both sides, remove these. On the top of the rear bumper, between the bumper and the bottom of the liftgate opening you will find 6 to 8 plastic rivets that can be removed by pulling the center pins out, remove these. At this point you should be able to lift upward and rearward and release the bumper cover. Once the cover is free you must disconnect the electrical connector to the sensor wiring harness. With the bumper cover on the ground or a bench, you will see 4 9/16" nuts that hold the styrofoam bumper cushion to the bumper cover, remove these. Now you should be at the point where the backup sensors are accessable. When you install the new sensors be sure your electrical connectors click when they connect. these connectors go on hard and if they don't click you will be doing this job again. Reassemble in reverse order.
Hope this helps
Posted on Apr 03, 2010
Tips for a great answer:
How to replace Bumpers on Acura
Nov 28, 2012 | 2008 Hyundai Veracruz
Jul 09, 2012 | 1998 Ford Explorer
May 13, 2012 | 2009 Toyota Sienna
Feb 01, 2012 | 2007 Toyota Sienna
Feb 19, 2011 | 2004 Ford Explorer
Jan 01, 2010 | 2002 Ford Explorer
Dec 23, 2009 | 2004 Ford Explorer
Oct 02, 2009 | 2004 Ford Explorer
May 20, 2009 | 1997 Ford Explorer AWD
Apr 15, 2009 | 2004 Ford Explorer
583 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: