Question about Mitsubishi Minivan
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: I need a workshop manual
The mixture screw is located in a resessed hole just above the therma start plate at the rear of the carby. The rear of the carby faces away from the inlet manifold and you require a special tool to access this adjustment. The other screw adjustments on the carby and linkages are for idle, fast idle, and choke limits including those models with automatic (thermal type) choke mechanisms.
I would advise that if you make any adjustments to the mixture that you have the mixture checked using an exhaust gas analyser.However, as a general rule of thumb, screw the mixture adjustment all the way in until you feel it tighten but DO NOT FORCE IT !! the screw has a delicate needle valve on the end which will be damaged if the screw is forced beyond it's normal length of travel.
Unscrew the mixture screw a total of one and a quarter turns back out and then have the setting checked with a exhaust gas analyser. Too rich and not only is this expensive but will cause damage to spark plugs etc. Too lean a setting will cause a misfire which will damage valves and pistons.
Posted on Mar 08, 2011
SOURCE: Misubishi L300 sliding door
Any year door between 1979 and present will do, the basic shell of the car - including doors - hasn't changed.
For a perfect fit of the trim you should get one from 79 to 86.
Posted on Jun 04, 2010
Tips for a great answer:
Dec 08, 2017 | Mitsubishi Cars & Trucks
Jan 21, 2016 | Mitsubishi Lancer Cars & Trucks
Jan 05, 2013 | Cars & Trucks
Apr 10, 2011 | Mitsubishi Cargo Cars & Trucks
Dec 08, 2010 | 1990 Mitsubishi Minivan
Dec 01, 2010 | 2002 Mitsubishi Lancer
May 07, 2009 | Mitsubishi Minivan Cars & Trucks
Aug 19, 2008 | 1990 Mitsubishi Minivan
322 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: